Tag Archives: container

[$] Autoscaling for Kubernetes workloads

Post Syndicated from corbet original https://lwn.net/Articles/754153/rss

Technologies like containers, clusters, and Kubernetes offer the prospect
of rapidly scaling the available computing resources to match variable demands
placed on the system. Actually implementing that scaling can be a
challenge, though.
During KubeCon
+ CloudNativeCon Europe 2018
,
Frederic Branczyk from CoreOS (now
part of Red Hat) held a packed session
to introduce a standard and officially recommended way to scale workloads
automatically in Kubernetes
clusters.

Analyze Apache Parquet optimized data using Amazon Kinesis Data Firehose, Amazon Athena, and Amazon Redshift

Post Syndicated from Roy Hasson original https://aws.amazon.com/blogs/big-data/analyzing-apache-parquet-optimized-data-using-amazon-kinesis-data-firehose-amazon-athena-and-amazon-redshift/

Amazon Kinesis Data Firehose is the easiest way to capture and stream data into a data lake built on Amazon S3. This data can be anything—from AWS service logs like AWS CloudTrail log files, Amazon VPC Flow Logs, Application Load Balancer logs, and others. It can also be IoT events, game events, and much more. To efficiently query this data, a time-consuming ETL (extract, transform, and load) process is required to massage and convert the data to an optimal file format, which increases the time to insight. This situation is less than ideal, especially for real-time data that loses its value over time.

To solve this common challenge, Kinesis Data Firehose can now save data to Amazon S3 in Apache Parquet or Apache ORC format. These are optimized columnar formats that are highly recommended for best performance and cost-savings when querying data in S3. This feature directly benefits you if you use Amazon Athena, Amazon Redshift, AWS Glue, Amazon EMR, or any other big data tools that are available from the AWS Partner Network and through the open-source community.

Amazon Connect is a simple-to-use, cloud-based contact center service that makes it easy for any business to provide a great customer experience at a lower cost than common alternatives. Its open platform design enables easy integration with other systems. One of those systems is Amazon Kinesis—in particular, Kinesis Data Streams and Kinesis Data Firehose.

What’s really exciting is that you can now save events from Amazon Connect to S3 in Apache Parquet format. You can then perform analytics using Amazon Athena and Amazon Redshift Spectrum in real time, taking advantage of this key performance and cost optimization. Of course, Amazon Connect is only one example. This new capability opens the door for a great deal of opportunity, especially as organizations continue to build their data lakes.

Amazon Connect includes an array of analytics views in the Administrator dashboard. But you might want to run other types of analysis. In this post, I describe how to set up a data stream from Amazon Connect through Kinesis Data Streams and Kinesis Data Firehose and out to S3, and then perform analytics using Athena and Amazon Redshift Spectrum. I focus primarily on the Kinesis Data Firehose support for Parquet and its integration with the AWS Glue Data Catalog, Amazon Athena, and Amazon Redshift.

Solution overview

Here is how the solution is laid out:

 

 

The following sections walk you through each of these steps to set up the pipeline.

1. Define the schema

When Kinesis Data Firehose processes incoming events and converts the data to Parquet, it needs to know which schema to apply. The reason is that many times, incoming events contain all or some of the expected fields based on which values the producers are advertising. A typical process is to normalize the schema during a batch ETL job so that you end up with a consistent schema that can easily be understood and queried. Doing this introduces latency due to the nature of the batch process. To overcome this issue, Kinesis Data Firehose requires the schema to be defined in advance.

To see the available columns and structures, see Amazon Connect Agent Event Streams. For the purpose of simplicity, I opted to make all the columns of type String rather than create the nested structures. But you can definitely do that if you want.

The simplest way to define the schema is to create a table in the Amazon Athena console. Open the Athena console, and paste the following create table statement, substituting your own S3 bucket and prefix for where your event data will be stored. A Data Catalog database is a logical container that holds the different tables that you can create. The default database name shown here should already exist. If it doesn’t, you can create it or use another database that you’ve already created.

CREATE EXTERNAL TABLE default.kfhconnectblog (
  awsaccountid string,
  agentarn string,
  currentagentsnapshot string,
  eventid string,
  eventtimestamp string,
  eventtype string,
  instancearn string,
  previousagentsnapshot string,
  version string
)
STORED AS parquet
LOCATION 's3://your_bucket/kfhconnectblog/'
TBLPROPERTIES ("parquet.compression"="SNAPPY")

That’s all you have to do to prepare the schema for Kinesis Data Firehose.

2. Define the data streams

Next, you need to define the Kinesis data streams that will be used to stream the Amazon Connect events.  Open the Kinesis Data Streams console and create two streams.  You can configure them with only one shard each because you don’t have a lot of data right now.

3. Define the Kinesis Data Firehose delivery stream for Parquet

Let’s configure the Data Firehose delivery stream using the data stream as the source and Amazon S3 as the output. Start by opening the Kinesis Data Firehose console and creating a new data delivery stream. Give it a name, and associate it with the Kinesis data stream that you created in Step 2.

As shown in the following screenshot, enable Record format conversion (1) and choose Apache Parquet (2). As you can see, Apache ORC is also supported. Scroll down and provide the AWS Glue Data Catalog database name (3) and table names (4) that you created in Step 1. Choose Next.

To make things easier, the output S3 bucket and prefix fields are automatically populated using the values that you defined in the LOCATION parameter of the create table statement from Step 1. Pretty cool. Additionally, you have the option to save the raw events into another location as defined in the Source record S3 backup section. Don’t forget to add a trailing forward slash “ / “ so that Data Firehose creates the date partitions inside that prefix.

On the next page, in the S3 buffer conditions section, there is a note about configuring a large buffer size. The Parquet file format is highly efficient in how it stores and compresses data. Increasing the buffer size allows you to pack more rows into each output file, which is preferred and gives you the most benefit from Parquet.

Compression using Snappy is automatically enabled for both Parquet and ORC. You can modify the compression algorithm by using the Kinesis Data Firehose API and update the OutputFormatConfiguration.

Be sure to also enable Amazon CloudWatch Logs so that you can debug any issues that you might run into.

Lastly, finalize the creation of the Firehose delivery stream, and continue on to the next section.

4. Set up the Amazon Connect contact center

After setting up the Kinesis pipeline, you now need to set up a simple contact center in Amazon Connect. The Getting Started page provides clear instructions on how to set up your environment, acquire a phone number, and create an agent to accept calls.

After setting up the contact center, in the Amazon Connect console, choose your Instance Alias, and then choose Data Streaming. Under Agent Event, choose the Kinesis data stream that you created in Step 2, and then choose Save.

At this point, your pipeline is complete.  Agent events from Amazon Connect are generated as agents go about their day. Events are sent via Kinesis Data Streams to Kinesis Data Firehose, which converts the event data from JSON to Parquet and stores it in S3. Athena and Amazon Redshift Spectrum can simply query the data without any additional work.

So let’s generate some data. Go back into the Administrator console for your Amazon Connect contact center, and create an agent to handle incoming calls. In this example, I creatively named mine Agent One. After it is created, Agent One can get to work and log into their console and set their availability to Available so that they are ready to receive calls.

To make the data a bit more interesting, I also created a second agent, Agent Two. I then made some incoming and outgoing calls and caused some failures to occur, so I now have enough data available to analyze.

5. Analyze the data with Athena

Let’s open the Athena console and run some queries. One thing you’ll notice is that when we created the schema for the dataset, we defined some of the fields as Strings even though in the documentation they were complex structures.  The reason for doing that was simply to show some of the flexibility of Athena to be able to parse JSON data. However, you can define nested structures in your table schema so that Kinesis Data Firehose applies the appropriate schema to the Parquet file.

Let’s run the first query to see which agents have logged into the system.

The query might look complex, but it’s fairly straightforward:

WITH dataset AS (
  SELECT 
    from_iso8601_timestamp(eventtimestamp) AS event_ts,
    eventtype,
    -- CURRENT STATE
    json_extract_scalar(
      currentagentsnapshot,
      '$.agentstatus.name') AS current_status,
    from_iso8601_timestamp(
      json_extract_scalar(
        currentagentsnapshot,
        '$.agentstatus.starttimestamp')) AS current_starttimestamp,
    json_extract_scalar(
      currentagentsnapshot, 
      '$.configuration.firstname') AS current_firstname,
    json_extract_scalar(
      currentagentsnapshot,
      '$.configuration.lastname') AS current_lastname,
    json_extract_scalar(
      currentagentsnapshot, 
      '$.configuration.username') AS current_username,
    json_extract_scalar(
      currentagentsnapshot, 
      '$.configuration.routingprofile.defaultoutboundqueue.name') AS               current_outboundqueue,
    json_extract_scalar(
      currentagentsnapshot, 
      '$.configuration.routingprofile.inboundqueues[0].name') as current_inboundqueue,
    -- PREVIOUS STATE
    json_extract_scalar(
      previousagentsnapshot, 
      '$.agentstatus.name') as prev_status,
    from_iso8601_timestamp(
      json_extract_scalar(
        previousagentsnapshot, 
       '$.agentstatus.starttimestamp')) as prev_starttimestamp,
    json_extract_scalar(
      previousagentsnapshot, 
      '$.configuration.firstname') as prev_firstname,
    json_extract_scalar(
      previousagentsnapshot, 
      '$.configuration.lastname') as prev_lastname,
    json_extract_scalar(
      previousagentsnapshot, 
      '$.configuration.username') as prev_username,
    json_extract_scalar(
      previousagentsnapshot, 
      '$.configuration.routingprofile.defaultoutboundqueue.name') as current_outboundqueue,
    json_extract_scalar(
      previousagentsnapshot, 
      '$.configuration.routingprofile.inboundqueues[0].name') as prev_inboundqueue
  from kfhconnectblog
  where eventtype <> 'HEART_BEAT'
)
SELECT
  current_status as status,
  current_username as username,
  event_ts
FROM dataset
WHERE eventtype = 'LOGIN' AND current_username <> ''
ORDER BY event_ts DESC

The query output looks something like this:

Here is another query that shows the sessions each of the agents engaged with. It tells us where they were incoming or outgoing, if they were completed, and where there were missed or failed calls.

WITH src AS (
  SELECT
     eventid,
     json_extract_scalar(currentagentsnapshot, '$.configuration.username') as username,
     cast(json_extract(currentagentsnapshot, '$.contacts') AS ARRAY(JSON)) as c,
     cast(json_extract(previousagentsnapshot, '$.contacts') AS ARRAY(JSON)) as p
  from kfhconnectblog
),
src2 AS (
  SELECT *
  FROM src CROSS JOIN UNNEST (c, p) AS contacts(c_item, p_item)
),
dataset AS (
SELECT 
  eventid,
  username,
  json_extract_scalar(c_item, '$.contactid') as c_contactid,
  json_extract_scalar(c_item, '$.channel') as c_channel,
  json_extract_scalar(c_item, '$.initiationmethod') as c_direction,
  json_extract_scalar(c_item, '$.queue.name') as c_queue,
  json_extract_scalar(c_item, '$.state') as c_state,
  from_iso8601_timestamp(json_extract_scalar(c_item, '$.statestarttimestamp')) as c_ts,
  
  json_extract_scalar(p_item, '$.contactid') as p_contactid,
  json_extract_scalar(p_item, '$.channel') as p_channel,
  json_extract_scalar(p_item, '$.initiationmethod') as p_direction,
  json_extract_scalar(p_item, '$.queue.name') as p_queue,
  json_extract_scalar(p_item, '$.state') as p_state,
  from_iso8601_timestamp(json_extract_scalar(p_item, '$.statestarttimestamp')) as p_ts
FROM src2
)
SELECT 
  username,
  c_channel as channel,
  c_direction as direction,
  p_state as prev_state,
  c_state as current_state,
  c_ts as current_ts,
  c_contactid as id
FROM dataset
WHERE c_contactid = p_contactid
ORDER BY id DESC, current_ts ASC

The query output looks similar to the following:

6. Analyze the data with Amazon Redshift Spectrum

With Amazon Redshift Spectrum, you can query data directly in S3 using your existing Amazon Redshift data warehouse cluster. Because the data is already in Parquet format, Redshift Spectrum gets the same great benefits that Athena does.

Here is a simple query to show querying the same data from Amazon Redshift. Note that to do this, you need to first create an external schema in Amazon Redshift that points to the AWS Glue Data Catalog.

SELECT 
  eventtype,
  json_extract_path_text(currentagentsnapshot,'agentstatus','name') AS current_status,
  json_extract_path_text(currentagentsnapshot, 'configuration','firstname') AS current_firstname,
  json_extract_path_text(currentagentsnapshot, 'configuration','lastname') AS current_lastname,
  json_extract_path_text(
    currentagentsnapshot,
    'configuration','routingprofile','defaultoutboundqueue','name') AS current_outboundqueue,
FROM default_schema.kfhconnectblog

The following shows the query output:

Summary

In this post, I showed you how to use Kinesis Data Firehose to ingest and convert data to columnar file format, enabling real-time analysis using Athena and Amazon Redshift. This great feature enables a level of optimization in both cost and performance that you need when storing and analyzing large amounts of data. This feature is equally important if you are investing in building data lakes on AWS.

 


Additional Reading

If you found this post useful, be sure to check out Analyzing VPC Flow Logs with Amazon Kinesis Firehose, Amazon Athena, and Amazon QuickSight and Work with partitioned data in AWS Glue.


About the Author

Roy Hasson is a Global Business Development Manager for AWS Analytics. He works with customers around the globe to design solutions to meet their data processing, analytics and business intelligence needs. Roy is big Manchester United fan cheering his team on and hanging out with his family.

 

 

 

AWS Online Tech Talks – May and Early June 2018

Post Syndicated from Devin Watson original https://aws.amazon.com/blogs/aws/aws-online-tech-talks-may-and-early-june-2018/

AWS Online Tech Talks – May and Early June 2018  

Join us this month to learn about some of the exciting new services and solution best practices at AWS. We also have our first re:Invent 2018 webinar series, “How to re:Invent”. Sign up now to learn more, we look forward to seeing you.

Note – All sessions are free and in Pacific Time.

Tech talks featured this month:

Analytics & Big Data

May 21, 2018 | 11:00 AM – 11:45 AM PT Integrating Amazon Elasticsearch with your DevOps Tooling – Learn how you can easily integrate Amazon Elasticsearch Service into your DevOps tooling and gain valuable insight from your log data.

May 23, 2018 | 11:00 AM – 11:45 AM PTData Warehousing and Data Lake Analytics, Together – Learn how to query data across your data warehouse and data lake without moving data.

May 24, 2018 | 11:00 AM – 11:45 AM PTData Transformation Patterns in AWS – Discover how to perform common data transformations on the AWS Data Lake.

Compute

May 29, 2018 | 01:00 PM – 01:45 PM PT – Creating and Managing a WordPress Website with Amazon Lightsail – Learn about Amazon Lightsail and how you can create, run and manage your WordPress websites with Amazon’s simple compute platform.

May 30, 2018 | 01:00 PM – 01:45 PM PTAccelerating Life Sciences with HPC on AWS – Learn how you can accelerate your Life Sciences research workloads by harnessing the power of high performance computing on AWS.

Containers

May 24, 2018 | 01:00 PM – 01:45 PM PT – Building Microservices with the 12 Factor App Pattern on AWS – Learn best practices for building containerized microservices on AWS, and how traditional software design patterns evolve in the context of containers.

Databases

May 21, 2018 | 01:00 PM – 01:45 PM PTHow to Migrate from Cassandra to Amazon DynamoDB – Get the benefits, best practices and guides on how to migrate your Cassandra databases to Amazon DynamoDB.

May 23, 2018 | 01:00 PM – 01:45 PM PT5 Hacks for Optimizing MySQL in the Cloud – Learn how to optimize your MySQL databases for high availability, performance, and disaster resilience using RDS.

DevOps

May 23, 2018 | 09:00 AM – 09:45 AM PT.NET Serverless Development on AWS – Learn how to build a modern serverless application in .NET Core 2.0.

Enterprise & Hybrid

May 22, 2018 | 11:00 AM – 11:45 AM PTHybrid Cloud Customer Use Cases on AWS – Learn how customers are leveraging AWS hybrid cloud capabilities to easily extend their datacenter capacity, deliver new services and applications, and ensure business continuity and disaster recovery.

IoT

May 31, 2018 | 11:00 AM – 11:45 AM PTUsing AWS IoT for Industrial Applications – Discover how you can quickly onboard your fleet of connected devices, keep them secure, and build predictive analytics with AWS IoT.

Machine Learning

May 22, 2018 | 09:00 AM – 09:45 AM PTUsing Apache Spark with Amazon SageMaker – Discover how to use Apache Spark with Amazon SageMaker for training jobs and application integration.

May 24, 2018 | 09:00 AM – 09:45 AM PTIntroducing AWS DeepLens – Learn how AWS DeepLens provides a new way for developers to learn machine learning by pairing the physical device with a broad set of tutorials, examples, source code, and integration with familiar AWS services.

Management Tools

May 21, 2018 | 09:00 AM – 09:45 AM PTGaining Better Observability of Your VMs with Amazon CloudWatch – Learn how CloudWatch Agent makes it easy for customers like Rackspace to monitor their VMs.

Mobile

May 29, 2018 | 11:00 AM – 11:45 AM PT – Deep Dive on Amazon Pinpoint Segmentation and Endpoint Management – See how segmentation and endpoint management with Amazon Pinpoint can help you target the right audience.

Networking

May 31, 2018 | 09:00 AM – 09:45 AM PTMaking Private Connectivity the New Norm via AWS PrivateLink – See how PrivateLink enables service owners to offer private endpoints to customers outside their company.

Security, Identity, & Compliance

May 30, 2018 | 09:00 AM – 09:45 AM PT – Introducing AWS Certificate Manager Private Certificate Authority (CA) – Learn how AWS Certificate Manager (ACM) Private Certificate Authority (CA), a managed private CA service, helps you easily and securely manage the lifecycle of your private certificates.

June 1, 2018 | 09:00 AM – 09:45 AM PTIntroducing AWS Firewall Manager – Centrally configure and manage AWS WAF rules across your accounts and applications.

Serverless

May 22, 2018 | 01:00 PM – 01:45 PM PTBuilding API-Driven Microservices with Amazon API Gateway – Learn how to build a secure, scalable API for your application in our tech talk about API-driven microservices.

Storage

May 30, 2018 | 11:00 AM – 11:45 AM PTAccelerate Productivity by Computing at the Edge – Learn how AWS Snowball Edge support for compute instances helps accelerate data transfers, execute custom applications, and reduce overall storage costs.

June 1, 2018 | 11:00 AM – 11:45 AM PTLearn to Build a Cloud-Scale Website Powered by Amazon EFS – Technical deep dive where you’ll learn tips and tricks for integrating WordPress, Drupal and Magento with Amazon EFS.

 

 

 

 

The plan for merging CoreOS into Red Hat

Post Syndicated from corbet original https://lwn.net/Articles/754058/rss

The CoreOS blog is carrying an
article
describing the path forward now that CoreOS is owned by Red
Hat. “Since Red Hat’s acquisition of CoreOS was announced, we
received questions on the fate of Container Linux. CoreOS’s first project,
and initially its namesake, pioneered the lightweight, ‘over-the-air’
automatically updated container native operating system that fast rose in
popularity running the world’s containers. With the acquisition, Container
Linux will be reborn as Red Hat CoreOS, a new entry into the Red Hat
ecosystem. Red Hat CoreOS will be based on Fedora and Red Hat Enterprise
Linux sources and is expected to ultimately supersede Atomic Host as Red
Hat’s immutable, container-centric operating system.
” Some
information can also be found in this
Red Hat press release
.

Analyze data in Amazon DynamoDB using Amazon SageMaker for real-time prediction

Post Syndicated from YongSeong Lee original https://aws.amazon.com/blogs/big-data/analyze-data-in-amazon-dynamodb-using-amazon-sagemaker-for-real-time-prediction/

Many companies across the globe use Amazon DynamoDB to store and query historical user-interaction data. DynamoDB is a fast NoSQL database used by applications that need consistent, single-digit millisecond latency.

Often, customers want to turn their valuable data in DynamoDB into insights by analyzing a copy of their table stored in Amazon S3. Doing this separates their analytical queries from their low-latency critical paths. This data can be the primary source for understanding customers’ past behavior, predicting future behavior, and generating downstream business value. Customers often turn to DynamoDB because of its great scalability and high availability. After a successful launch, many customers want to use the data in DynamoDB to predict future behaviors or provide personalized recommendations.

DynamoDB is a good fit for low-latency reads and writes, but it’s not practical to scan all data in a DynamoDB database to train a model. In this post, I demonstrate how you can use DynamoDB table data copied to Amazon S3 by AWS Data Pipeline to predict customer behavior. I also demonstrate how you can use this data to provide personalized recommendations for customers using Amazon SageMaker. You can also run ad hoc queries using Amazon Athena against the data. DynamoDB recently released on-demand backups to create full table backups with no performance impact. However, it’s not suitable for our purposes in this post, so I chose AWS Data Pipeline instead to create managed backups are accessible from other services.

To do this, I describe how to read the DynamoDB backup file format in Data Pipeline. I also describe how to convert the objects in S3 to a CSV format that Amazon SageMaker can read. In addition, I show how to schedule regular exports and transformations using Data Pipeline. The sample data used in this post is from Bank Marketing Data Set of UCI.

The solution that I describe provides the following benefits:

  • Separates analytical queries from production traffic on your DynamoDB table, preserving your DynamoDB read capacity units (RCUs) for important production requests
  • Automatically updates your model to get real-time predictions
  • Optimizes for performance (so it doesn’t compete with DynamoDB RCUs after the export) and for cost (using data you already have)
  • Makes it easier for developers of all skill levels to use Amazon SageMaker

All code and data set in this post are available in this .zip file.

Solution architecture

The following diagram shows the overall architecture of the solution.

The steps that data follows through the architecture are as follows:

  1. Data Pipeline regularly copies the full contents of a DynamoDB table as JSON into an S3
  2. Exported JSON files are converted to comma-separated value (CSV) format to use as a data source for Amazon SageMaker.
  3. Amazon SageMaker renews the model artifact and update the endpoint.
  4. The converted CSV is available for ad hoc queries with Amazon Athena.
  5. Data Pipeline controls this flow and repeats the cycle based on the schedule defined by customer requirements.

Building the auto-updating model

This section discusses details about how to read the DynamoDB exported data in Data Pipeline and build automated workflows for real-time prediction with a regularly updated model.

Download sample scripts and data

Before you begin, take the following steps:

  1. Download sample scripts in this .zip file.
  2. Unzip the src.zip file.
  3. Find the automation_script.sh file and edit it for your environment. For example, you need to replace 's3://<your bucket>/<datasource path>/' with your own S3 path to the data source for Amazon ML. In the script, the text enclosed by angle brackets—< and >—should be replaced with your own path.
  4. Upload the json-serde-1.3.6-SNAPSHOT-jar-with-dependencies.jar file to your S3 path so that the ADD jar command in Apache Hive can refer to it.

For this solution, the banking.csv  should be imported into a DynamoDB table.

Export a DynamoDB table

To export the DynamoDB table to S3, open the Data Pipeline console and choose the Export DynamoDB table to S3 template. In this template, Data Pipeline creates an Amazon EMR cluster and performs an export in the EMRActivity activity. Set proper intervals for backups according to your business requirements.

One core node(m3.xlarge) provides the default capacity for the EMR cluster and should be suitable for the solution in this post. Leave the option to resize the cluster before running enabled in the TableBackupActivity activity to let Data Pipeline scale the cluster to match the table size. The process of converting to CSV format and renewing models happens in this EMR cluster.

For a more in-depth look at how to export data from DynamoDB, see Export Data from DynamoDB in the Data Pipeline documentation.

Add the script to an existing pipeline

After you export your DynamoDB table, you add an additional EMR step to EMRActivity by following these steps:

  1. Open the Data Pipeline console and choose the ID for the pipeline that you want to add the script to.
  2. For Actions, choose Edit.
  3. In the editing console, choose the Activities category and add an EMR step using the custom script downloaded in the previous section, as shown below.

Paste the following command into the new step after the data ­­upload step:

s3://#{myDDBRegion}.elasticmapreduce/libs/script-runner/script-runner.jar,s3://<your bucket name>/automation_script.sh,#{output.directoryPath},#{myDDBRegion}

The element #{output.directoryPath} references the S3 path where the data pipeline exports DynamoDB data as JSON. The path should be passed to the script as an argument.

The bash script has two goals, converting data formats and renewing the Amazon SageMaker model. Subsequent sections discuss the contents of the automation script.

Automation script: Convert JSON data to CSV with Hive

We use Apache Hive to transform the data into a new format. The Hive QL script to create an external table and transform the data is included in the custom script that you added to the Data Pipeline definition.

When you run the Hive scripts, do so with the -e option. Also, define the Hive table with the 'org.openx.data.jsonserde.JsonSerDe' row format to parse and read JSON format. The SQL creates a Hive EXTERNAL table, and it reads the DynamoDB backup data on the S3 path passed to it by Data Pipeline.

Note: You should create the table with the “EXTERNAL” keyword to avoid the backup data being accidentally deleted from S3 if you drop the table.

The full automation script for converting follows. Add your own bucket name and data source path in the highlighted areas.

#!/bin/bash
hive -e "
ADD jar s3://<your bucket name>/json-serde-1.3.6-SNAPSHOT-jar-with-dependencies.jar ; 
DROP TABLE IF EXISTS blog_backup_data ;
CREATE EXTERNAL TABLE blog_backup_data (
 customer_id map<string,string>,
 age map<string,string>, job map<string,string>, 
 marital map<string,string>,education map<string,string>, 
 default map<string,string>, housing map<string,string>,
 loan map<string,string>, contact map<string,string>, 
 month map<string,string>, day_of_week map<string,string>, 
 duration map<string,string>, campaign map<string,string>,
 pdays map<string,string>, previous map<string,string>, 
 poutcome map<string,string>, emp_var_rate map<string,string>, 
 cons_price_idx map<string,string>, cons_conf_idx map<string,string>,
 euribor3m map<string,string>, nr_employed map<string,string>, 
 y map<string,string> ) 
ROW FORMAT SERDE 'org.openx.data.jsonserde.JsonSerDe' 
LOCATION '$1/';

INSERT OVERWRITE DIRECTORY 's3://<your bucket name>/<datasource path>/' 
SELECT concat( customer_id['s'],',', 
 age['n'],',', job['s'],',', 
 marital['s'],',', education['s'],',', default['s'],',', 
 housing['s'],',', loan['s'],',', contact['s'],',', 
 month['s'],',', day_of_week['s'],',', duration['n'],',', 
 campaign['n'],',',pdays['n'],',',previous['n'],',', 
 poutcome['s'],',', emp_var_rate['n'],',', cons_price_idx['n'],',',
 cons_conf_idx['n'],',', euribor3m['n'],',', nr_employed['n'],',', y['n'] ) 
FROM blog_backup_data
WHERE customer_id['s'] > 0 ; 

After creating an external table, you need to read data. You then use the INSERT OVERWRITE DIRECTORY ~ SELECT command to write CSV data to the S3 path that you designated as the data source for Amazon SageMaker.

Depending on your requirements, you can eliminate or process the columns in the SELECT clause in this step to optimize data analysis. For example, you might remove some columns that have unpredictable correlations with the target value because keeping the wrong columns might expose your model to “overfitting” during the training. In this post, customer_id  columns is removed. Overfitting can make your prediction weak. More information about overfitting can be found in the topic Model Fit: Underfitting vs. Overfitting in the Amazon ML documentation.

Automation script: Renew the Amazon SageMaker model

After the CSV data is replaced and ready to use, create a new model artifact for Amazon SageMaker with the updated dataset on S3.  For renewing model artifact, you must create a new training job.  Training jobs can be run using the AWS SDK ( for example, Amazon SageMaker boto3 ) or the Amazon SageMaker Python SDK that can be installed with “pip install sagemaker” command as well as the AWS CLI for Amazon SageMaker described in this post.

In addition, consider how to smoothly renew your existing model without service impact, because your model is called by applications in real time. To do this, you need to create a new endpoint configuration first and update a current endpoint with the endpoint configuration that is just created.

#!/bin/bash
## Define variable 
REGION=$2
DTTIME=`date +%Y-%m-%d-%H-%M-%S`
ROLE="<your AmazonSageMaker-ExecutionRole>" 


# Select containers image based on region.  
case "$REGION" in
"us-west-2" )
    IMAGE="174872318107.dkr.ecr.us-west-2.amazonaws.com/linear-learner:latest"
    ;;
"us-east-1" )
    IMAGE="382416733822.dkr.ecr.us-east-1.amazonaws.com/linear-learner:latest" 
    ;;
"us-east-2" )
    IMAGE="404615174143.dkr.ecr.us-east-2.amazonaws.com/linear-learner:latest" 
    ;;
"eu-west-1" )
    IMAGE="438346466558.dkr.ecr.eu-west-1.amazonaws.com/linear-learner:latest" 
    ;;
 *)
    echo "Invalid Region Name"
    exit 1 ;  
esac

# Start training job and creating model artifact 
TRAINING_JOB_NAME=TRAIN-${DTTIME} 
S3OUTPUT="s3://<your bucket name>/model/" 
INSTANCETYPE="ml.m4.xlarge"
INSTANCECOUNT=1
VOLUMESIZE=5 
aws sagemaker create-training-job --training-job-name ${TRAINING_JOB_NAME} --region ${REGION}  --algorithm-specification TrainingImage=${IMAGE},TrainingInputMode=File --role-arn ${ROLE}  --input-data-config '[{ "ChannelName": "train", "DataSource": { "S3DataSource": { "S3DataType": "S3Prefix", "S3Uri": "s3://<your bucket name>/<datasource path>/", "S3DataDistributionType": "FullyReplicated" } }, "ContentType": "text/csv", "CompressionType": "None" , "RecordWrapperType": "None"  }]'  --output-data-config S3OutputPath=${S3OUTPUT} --resource-config  InstanceType=${INSTANCETYPE},InstanceCount=${INSTANCECOUNT},VolumeSizeInGB=${VOLUMESIZE} --stopping-condition MaxRuntimeInSeconds=120 --hyper-parameters feature_dim=20,predictor_type=binary_classifier  

# Wait until job completed 
aws sagemaker wait training-job-completed-or-stopped --training-job-name ${TRAINING_JOB_NAME}  --region ${REGION}

# Get newly created model artifact and create model
MODELARTIFACT=`aws sagemaker describe-training-job --training-job-name ${TRAINING_JOB_NAME} --region ${REGION}  --query 'ModelArtifacts.S3ModelArtifacts' --output text `
MODELNAME=MODEL-${DTTIME}
aws sagemaker create-model --region ${REGION} --model-name ${MODELNAME}  --primary-container Image=${IMAGE},ModelDataUrl=${MODELARTIFACT}  --execution-role-arn ${ROLE}

# create a new endpoint configuration 
CONFIGNAME=CONFIG-${DTTIME}
aws sagemaker  create-endpoint-config --region ${REGION} --endpoint-config-name ${CONFIGNAME}  --production-variants  VariantName=Users,ModelName=${MODELNAME},InitialInstanceCount=1,InstanceType=ml.m4.xlarge

# create or update the endpoint
STATUS=`aws sagemaker describe-endpoint --endpoint-name  ServiceEndpoint --query 'EndpointStatus' --output text --region ${REGION} `
if [[ $STATUS -ne "InService" ]] ;
then
    aws sagemaker  create-endpoint --endpoint-name  ServiceEndpoint  --endpoint-config-name ${CONFIGNAME} --region ${REGION}    
else
    aws sagemaker  update-endpoint --endpoint-name  ServiceEndpoint  --endpoint-config-name ${CONFIGNAME} --region ${REGION}
fi

Grant permission

Before you execute the script, you must grant proper permission to Data Pipeline. Data Pipeline uses the DataPipelineDefaultResourceRole role by default. I added the following policy to DataPipelineDefaultResourceRole to allow Data Pipeline to create, delete, and update the Amazon SageMaker model and data source in the script.

{
 "Version": "2012-10-17",
 "Statement": [
 {
 "Effect": "Allow",
 "Action": [
 "sagemaker:CreateTrainingJob",
 "sagemaker:DescribeTrainingJob",
 "sagemaker:CreateModel",
 "sagemaker:CreateEndpointConfig",
 "sagemaker:DescribeEndpoint",
 "sagemaker:CreateEndpoint",
 "sagemaker:UpdateEndpoint",
 "iam:PassRole"
 ],
 "Resource": "*"
 }
 ]
}

Use real-time prediction

After you deploy a model into production using Amazon SageMaker hosting services, your client applications use this API to get inferences from the model hosted at the specified endpoint. This approach is useful for interactive web, mobile, or desktop applications.

Following, I provide a simple Python code example that queries against Amazon SageMaker endpoint URL with its name (“ServiceEndpoint”) and then uses them for real-time prediction.

=== Python sample for real-time prediction ===

#!/usr/bin/env python
import boto3
import json 

client = boto3.client('sagemaker-runtime', region_name ='<your region>' )
new_customer_info = '34,10,2,4,1,2,1,1,6,3,190,1,3,4,3,-1.7,94.055,-39.8,0.715,4991.6'
response = client.invoke_endpoint(
    EndpointName='ServiceEndpoint',
    Body=new_customer_info, 
    ContentType='text/csv'
)
result = json.loads(response['Body'].read().decode())
print(result)
--- output(response) ---
{u'predictions': [{u'score': 0.7528127431869507, u'predicted_label': 1.0}]}

Solution summary

The solution takes the following steps:

  1. Data Pipeline exports DynamoDB table data into S3. The original JSON data should be kept to recover the table in the rare event that this is needed. Data Pipeline then converts JSON to CSV so that Amazon SageMaker can read the data.Note: You should select only meaningful attributes when you convert CSV. For example, if you judge that the “campaign” attribute is not correlated, you can eliminate this attribute from the CSV.
  2. Train the Amazon SageMaker model with the new data source.
  3. When a new customer comes to your site, you can judge how likely it is for this customer to subscribe to your new product based on “predictedScores” provided by Amazon SageMaker.
  4. If the new user subscribes your new product, your application must update the attribute “y” to the value 1 (for yes). This updated data is provided for the next model renewal as a new data source. It serves to improve the accuracy of your prediction. With each new entry, your application can become smarter and deliver better predictions.

Running ad hoc queries using Amazon Athena

Amazon Athena is a serverless query service that makes it easy to analyze large amounts of data stored in Amazon S3 using standard SQL. Athena is useful for examining data and collecting statistics or informative summaries about data. You can also use the powerful analytic functions of Presto, as described in the topic Aggregate Functions of Presto in the Presto documentation.

With the Data Pipeline scheduled activity, recent CSV data is always located in S3 so that you can run ad hoc queries against the data using Amazon Athena. I show this with example SQL statements following. For an in-depth description of this process, see the post Interactive SQL Queries for Data in Amazon S3 on the AWS News Blog. 

Creating an Amazon Athena table and running it

Simply, you can create an EXTERNAL table for the CSV data on S3 in Amazon Athena Management Console.

=== Table Creation ===
CREATE EXTERNAL TABLE datasource (
 age int, 
 job string, 
 marital string , 
 education string, 
 default string, 
 housing string, 
 loan string, 
 contact string, 
 month string, 
 day_of_week string, 
 duration int, 
 campaign int, 
 pdays int , 
 previous int , 
 poutcome string, 
 emp_var_rate double, 
 cons_price_idx double,
 cons_conf_idx double, 
 euribor3m double, 
 nr_employed double, 
 y int 
)
ROW FORMAT DELIMITED 
FIELDS TERMINATED BY ',' ESCAPED BY '\\' LINES TERMINATED BY '\n' 
LOCATION 's3://<your bucket name>/<datasource path>/';

The following query calculates the correlation coefficient between the target attribute and other attributes using Amazon Athena.

=== Sample Query ===

SELECT corr(age,y) AS correlation_age_and_target, 
 corr(duration,y) AS correlation_duration_and_target, 
 corr(campaign,y) AS correlation_campaign_and_target,
 corr(contact,y) AS correlation_contact_and_target
FROM ( SELECT age , duration , campaign , y , 
 CASE WHEN contact = 'telephone' THEN 1 ELSE 0 END AS contact 
 FROM datasource 
 ) datasource ;

Conclusion

In this post, I introduce an example of how to analyze data in DynamoDB by using table data in Amazon S3 to optimize DynamoDB table read capacity. You can then use the analyzed data as a new data source to train an Amazon SageMaker model for accurate real-time prediction. In addition, you can run ad hoc queries against the data on S3 using Amazon Athena. I also present how to automate these procedures by using Data Pipeline.

You can adapt this example to your specific use case at hand, and hopefully this post helps you accelerate your development. You can find more examples and use cases for Amazon SageMaker in the video AWS 2017: Introducing Amazon SageMaker on the AWS website.

 


Additional Reading

If you found this post useful, be sure to check out Serving Real-Time Machine Learning Predictions on Amazon EMR and Analyzing Data in S3 using Amazon Athena.

 


About the Author

Yong Seong Lee is a Cloud Support Engineer for AWS Big Data Services. He is interested in every technology related to data/databases and helping customers who have difficulties in using AWS services. His motto is “Enjoy life, be curious and have maximum experience.”

 

 

The Helium Factor and Hard Drive Failure Rates

Post Syndicated from Andy Klein original https://www.backblaze.com/blog/helium-filled-hard-drive-failure-rates/

Seagate Enterprise Capacity 3.5 Helium HDD

In November 2013, the first commercially available helium-filled hard drive was introduced by HGST, a Western Digital subsidiary. The 6 TB drive was not only unique in being helium-filled, it was for the moment, the highest capacity hard drive available. Fast forward a little over 4 years later and 12 TB helium-filled drives are readily available, 14 TB drives can be found, and 16 TB helium-filled drives are arriving soon.

Backblaze has been purchasing and deploying helium-filled hard drives over the past year and we thought it was time to start looking at their failure rates compared to traditional air-filled drives. This post will provide an overview, then we’ll continue the comparison on a regular basis over the coming months.

The Promise and Challenge of Helium Filled Drives

We all know that helium is lighter than air — that’s why helium-filled balloons float. Inside of an air-filled hard drive there are rapidly spinning disk platters that rotate at a given speed, 7200 rpm for example. The air inside adds an appreciable amount of drag on the platters that in turn requires an appreciable amount of additional energy to spin the platters. Replacing the air inside of a hard drive with helium reduces the amount of drag, thereby reducing the amount of energy needed to spin the platters, typically by 20%.

We also know that after a few days, a helium-filled balloon sinks to the ground. This was one of the key challenges in using helium inside of a hard drive: helium escapes from most containers, even if they are well sealed. It took years for hard drive manufacturers to create containers that could contain helium while still functioning as a hard drive. This container innovation allows helium-filled drives to function at spec over the course of their lifetime.

Checking for Leaks

Three years ago, we identified SMART 22 as the attribute assigned to recording the status of helium inside of a hard drive. We have both HGST and Seagate helium-filled hard drives, but only the HGST drives currently report the SMART 22 attribute. It appears the normalized and raw values for SMART 22 currently report the same value, which starts at 100 and goes down.

To date only one HGST drive has reported a value of less than 100, with multiple readings between 94 and 99. That drive continues to perform fine, with no other errors or any correlating changes in temperature, so we are not sure whether the change in value is trying to tell us something or if it is just a wonky sensor.

Helium versus Air-Filled Hard Drives

There are several different ways to compare these two types of drives. Below we decided to use just our 8, 10, and 12 TB drives in the comparison. We did this since we have helium-filled drives in those sizes. We left out of the comparison all of the drives that are 6 TB and smaller as none of the drive models we use are helium-filled. We are open to trying different comparisons. This just seemed to be the best place to start.

Lifetime Hard Drive Failure Rates: Helium vs. Air-Filled Hard Drives table

The most obvious observation is that there seems to be little difference in the Annualized Failure Rate (AFR) based on whether they contain helium or air. One conclusion, given this evidence, is that helium doesn’t affect the AFR of hard drives versus air-filled drives. My prediction is that the helium drives will eventually prove to have a lower AFR. Why? Drive Days.

Let’s go back in time to Q1 2017 when the air-filled drives listed in the table above had a similar number of Drive Days to the current number of Drive Days for the helium drives. We find that the failure rate for the air-filled drives at the time (Q1 2017) was 1.61%. In other words, when the drives were in use a similar number of hours, the helium drives had a failure rate of 1.06% while the failure rate of the air-filled drives was 1.61%.

Helium or Air?

My hypothesis is that after normalizing the data so that the helium and air-filled drives have the same (or similar) usage (Drive Days), the helium-filled drives we use will continue to have a lower Annualized Failure Rate versus the air-filled drives we use. I expect this trend to continue for the next year at least. What side do you come down on? Will the Annualized Failure Rate for helium-filled drives be better than air-filled drives or vice-versa? Or do you think the two technologies will be eventually produce the same AFR over time? Pick a side and we’ll document the results over the next year and see where the data takes us.

The post The Helium Factor and Hard Drive Failure Rates appeared first on Backblaze Blog | Cloud Storage & Cloud Backup.

[$] Containers and license compliance

Post Syndicated from jake original https://lwn.net/Articles/752982/rss

Containers are, of course, all the rage these days; in fact, during his
2018 Legal and
Licensing Workshop
(LLW) talk, Dirk Hohndel
said with a grin that he hears “containers may take off”. But, while
containers are
easy to set up and use, license compliance for containers is “incredibly
hard”. He has been spending “way too much time” thinking about container
compliance recently and, beyond the standard “let’s go shopping” solution
to hard problems, has come up with some ideas.
Hohndel is a longtime member of the FOSS community who is now the chief
open source officer at VMware—a company that ships some container images.

Google launches the gVisor container runtime

Post Syndicated from corbet original https://lwn.net/Articles/753324/rss

Google has announced
the open-sourcing of gVisor, a sandboxed container runtime.
gVisor is more lightweight than a VM while maintaining a similar
level of isolation. The core of gVisor is a kernel that runs as a normal,
unprivileged process that supports most Linux system calls. This kernel is
written in Go, which was chosen for its memory- and type-safety. Just like
within a VM, an application running in a gVisor sandbox gets its own kernel
and set of virtualized devices, distinct from the host and other
sandboxes.

Fedora Atomic Workstation becomes Team Silverblue

Post Syndicated from corbet original https://lwn.net/Articles/753293/rss

There is a new initiative in the Fedora community based on what used to be
called “Fedora Atomic Workstation”. From this
whitepaper [PDF]
: “The descriptive name for this product is ​
image-mode container-based Fedora Workstation based on rpm-ostree, which is
clear but terrible for branding. Therefore, we call it Team Silverblue.
The long-term goal for this effort is to transform Fedora Workstation into
an image-based system where applications are separate from the OS and
updates are atomic.

CI/CD with Data: Enabling Data Portability in a Software Delivery Pipeline with AWS Developer Tools, Kubernetes, and Portworx

Post Syndicated from Kausalya Rani Krishna Samy original https://aws.amazon.com/blogs/devops/cicd-with-data-enabling-data-portability-in-a-software-delivery-pipeline-with-aws-developer-tools-kubernetes-and-portworx/

This post is written by Eric Han – Vice President of Product Management Portworx and Asif Khan – Solutions Architect

Data is the soul of an application. As containers make it easier to package and deploy applications faster, testing plays an even more important role in the reliable delivery of software. Given that all applications have data, development teams want a way to reliably control, move, and test using real application data or, at times, obfuscated data.

For many teams, moving application data through a CI/CD pipeline, while honoring compliance and maintaining separation of concerns, has been a manual task that doesn’t scale. At best, it is limited to a few applications, and is not portable across environments. The goal should be to make running and testing stateful containers (think databases and message buses where operations are tracked) as easy as with stateless (such as with web front ends where they are often not).

Why is state important in testing scenarios? One reason is that many bugs manifest only when code is tested against real data. For example, we might simply want to test a database schema upgrade but a small synthetic dataset does not exercise the critical, finer corner cases in complex business logic. If we want true end-to-end testing, we need to be able to easily manage our data or state.

In this blog post, we define a CI/CD pipeline reference architecture that can automate data movement between applications. We also provide the steps to follow to configure the CI/CD pipeline.

 

Stateful Pipelines: Need for Portable Volumes

As part of continuous integration, testing, and deployment, a team may need to reproduce a bug found in production against a staging setup. Here, the hosting environment is comprised of a cluster with Kubernetes as the scheduler and Portworx for persistent volumes. The testing workflow is then automated by AWS CodeCommit, AWS CodePipeline, and AWS CodeBuild.

Portworx offers Kubernetes storage that can be used to make persistent volumes portable between AWS environments and pipelines. The addition of Portworx to the AWS Developer Tools continuous deployment for Kubernetes reference architecture adds persistent storage and storage orchestration to a Kubernetes cluster. The example uses MongoDB as the demonstration of a stateful application. In practice, the workflow applies to any containerized application such as Cassandra, MySQL, Kafka, and Elasticsearch.

Using the reference architecture, a developer calls CodePipeline to trigger a snapshot of the running production MongoDB database. Portworx then creates a block-based, writable snapshot of the MongoDB volume. Meanwhile, the production MongoDB database continues serving end users and is uninterrupted.

Without the Portworx integrations, a manual process would require an application-level backup of the database instance that is outside of the CI/CD process. For larger databases, this could take hours and impact production. The use of block-based snapshots follows best practices for resilient and non-disruptive backups.

As part of the workflow, CodePipeline deploys a new MongoDB instance for staging onto the Kubernetes cluster and mounts the second Portworx volume that has the data from production. CodePipeline triggers the snapshot of a Portworx volume through an AWS Lambda function, as shown here

 

 

 

AWS Developer Tools with Kubernetes: Integrated Workflow with Portworx

In the following workflow, a developer is testing changes to a containerized application that calls on MongoDB. The tests are performed against a staging instance of MongoDB. The same workflow applies if changes were on the server side. The original production deployment is scheduled as a Kubernetes deployment object and uses Portworx as the storage for the persistent volume.

The continuous deployment pipeline runs as follows:

  • Developers integrate bug fix changes into a main development branch that gets merged into a CodeCommit master branch.
  • Amazon CloudWatch triggers the pipeline when code is merged into a master branch of an AWS CodeCommit repository.
  • AWS CodePipeline sends the new revision to AWS CodeBuild, which builds a Docker container image with the build ID.
  • AWS CodeBuild pushes the new Docker container image tagged with the build ID to an Amazon ECR registry.
  • Kubernetes downloads the new container (for the database client) from Amazon ECR and deploys the application (as a pod) and staging MongoDB instance (as a deployment object).
  • AWS CodePipeline, through a Lambda function, calls Portworx to snapshot the production MongoDB and deploy a staging instance of MongoDB• Portworx provides a snapshot of the production instance as the persistent storage of the staging MongoDB
    • The MongoDB instance mounts the snapshot.

At this point, the staging setup mimics a production environment. Teams can run integration and full end-to-end tests, using partner tooling, without impacting production workloads. The full pipeline is shown here.

 

Summary

This reference architecture showcases how development teams can easily move data between production and staging for the purposes of testing. Instead of taking application-specific manual steps, all operations in this CodePipeline architecture are automated and tracked as part of the CI/CD process.

This integrated experience is part of making stateful containers as easy as stateless. With AWS CodePipeline for CI/CD process, developers can easily deploy stateful containers onto a Kubernetes cluster with Portworx storage and automate data movement within their process.

The reference architecture and code are available on GitHub:

● Reference architecture: https://github.com/portworx/aws-kube-codesuite
● Lambda function source code for Portworx additions: https://github.com/portworx/aws-kube-codesuite/blob/master/src/kube-lambda.py

For more information about persistent storage for containers, visit the Portworx website. For more information about Code Pipeline, see the AWS CodePipeline User Guide.

Security updates for Monday

Post Syndicated from ris original https://lwn.net/Articles/753137/rss

Security updates have been issued by Arch Linux (drupal), Debian (chromium-browser, gunicorn, libvorbis, openjdk-8, roundcube, sdl-image1.2, slurm-llnl, and tor), Fedora (boost, cups-filters, ghostscript, gsoap, memcached, mod_http2, and qpdf), openSUSE (Chromium and mysql-community-server), and Red Hat (glusterfs, OpenShift Container Platform 3.1, OpenShift Container Platform 3.2, OpenShift Container Platform 3.3, OpenShift Container Platform 3.4, OpenShift Container Platform 3.5, OpenShift Container Platform 3.6, OpenShift Container Platform 3.7, OpenShift Container Platform 3.8, OpenShift Container Platform 3.9, and openvswitch).

Secure Build with AWS CodeBuild and LayeredInsight

Post Syndicated from Asif Khan original https://aws.amazon.com/blogs/devops/secure-build-with-aws-codebuild-and-layeredinsight/

This post is written by Asif Awan, Chief Technology Officer of Layered InsightSubin Mathew – Software Development Manager for AWS CodeBuild, and Asif Khan – Solutions Architect

Enterprises adopt containers because they recognize the benefits: speed, agility, portability, and high compute density. They understand how accelerating application delivery and deployment pipelines makes it possible to rapidly slipstream new features to customers. Although the benefits are indisputable, this acceleration raises concerns about security and corporate compliance with software governance. In this blog post, I provide a solution that shows how Layered Insight, the pioneer and global leader in container-native application protection, can be used with seamless application build and delivery pipelines like those available in AWS CodeBuild to address these concerns.

Layered Insight solutions

Layered Insight enables organizations to unify DevOps and SecOps by providing complete visibility and control of containerized applications. Using the industry’s first embedded security approach, Layered Insight solves the challenges of container performance and protection by providing accurate insight into container images, adaptive analysis of running containers, and automated enforcement of container behavior.

 

AWS CodeBuild

AWS CodeBuild is a fully managed build service that compiles source code, runs tests, and produces software packages that are ready to deploy. With CodeBuild, you don’t need to provision, manage, and scale your own build servers. CodeBuild scales continuously and processes multiple builds concurrently, so your builds are not left waiting in a queue. You can get started quickly by using prepackaged build environments, or you can create custom build environments that use your own build tools.

 

Problem Definition

Security and compliance concerns span the lifecycle of application containers. Common concerns include:

Visibility into the container images. You need to verify the software composition information of the container image to determine whether known vulnerabilities associated with any of the software packages and libraries are included in the container image.

Governance of container images is critical because only certain open source packages/libraries, of specific versions, should be included in the container images. You need support for mechanisms for blacklisting all container images that include a certain version of a software package/library, or only allowing open source software that come with a specific type of license (such as Apache, MIT, GPL, and so on). You need to be able to address challenges such as:

·       Defining the process for image compliance policies at the enterprise, department, and group levels.

·       Preventing the images that fail the compliance checks from being deployed in critical environments, such as staging, pre-prod, and production.

Visibility into running container instances is critical, including:

·       CPU and memory utilization.

·       Security of the build environment.

·       All activities (system, network, storage, and application layer) of the application code running in each container instance.

Protection of running container instances that is:

·       Zero-touch to the developers (not an SDK-based approach).

·       Zero touch to the DevOps team and doesn’t limit the portability of the containerized application.

·       This protection must retain the option to switch to a different container stack or orchestration layer, or even to a different Container as a Service (CaaS ).

·       And it must be a fully automated solution to SecOps, so that the SecOps team doesn’t have to manually analyze and define detailed blacklist and whitelist policies.

 

Solution Details

In AWS CodeCommit, we have three projects:
●     “Democode” is a simple Java application, with one buildspec to build the app into a Docker container (run by build-demo-image CodeBuild project), and another to instrument said container (instrument-image CodeBuild project). The resulting container is stored in ECR repo javatestasjavatest:20180415-layered. This instrumented container is running in AWS Fargate cluster demo-java-appand can be seen in the Layered Insight runtime console as the javatestapplication in us-east-1.
●     aws-codebuild-docker-imagesis a clone of the official aws-codebuild-docker-images repo on GitHub . This CodeCommit project is used by the build-python-builder CodeBuild project to build the python 3.3.6 codebuild image and is stored at the codebuild-python ECR repo. We then manually instructed the Layered Insight console to instrument the image.
●     scan-java-imagecontains just a buildspec.yml file. This file is used by the scan-java-image CodeBuild project to instruct Layered Assessment to perform a vulnerability scan of the javatest container image built previously, and then run the scan results through a compliance policy that states there should be no medium vulnerabilities. This build fails — but in this case that is a success: the scan completes successfully, but compliance fails as there are medium-level issues found in the scan.

This build is performed using the instrumented version of the Python 3.3.6 CodeBuild image, so the activity of the processes running within the build are recorded each time within the LI console.

Build container image

Create or use a CodeCommit project with your application. To build this image and store it in Amazon Elastic Container Registry (Amazon ECR), add a buildspec file to the project and build a container image and create a CodeBuild project.

Scan container image

Once the image is built, create a new buildspec in the same project or a new one that looks similar to below (update ECR URL as necessary):

version: 0.2
phases:
  pre_build:
    commands:
      - echo Pulling down LI Scan API client scripts
      - git clone https://github.com/LayeredInsight/scan-api-example-python.git
      - echo Setting up LI Scan API client
      - cd scan-api-example-python
      - pip install layint_scan_api
      - pip install -r requirements.txt
  build:
    commands:
      - echo Scanning container started on `date`
      - IMAGEID=$(./li_add_image --name <aws-region>.amazonaws.com/javatest:20180415)
      - ./li_wait_for_scan -v --imageid $IMAGEID
      - ./li_run_image_compliance -v --imageid $IMAGEID --policyid PB15260f1acb6b2aa5b597e9d22feffb538256a01fbb4e5a95

Add the buildspec file to the git repo, push it, and then build a CodeBuild project using with the instrumented Python 3.3.6 CodeBuild image at <aws-region>.amazonaws.com/codebuild-python:3.3.6-layered. Set the following environment variables in the CodeBuild project:
●     LI_APPLICATIONNAME – name of the build to display
●     LI_LOCATION – location of the build project to display
●     LI_API_KEY – ApiKey:<key-name>:<api-key>
●     LI_API_HOST – location of the Layered Insight API service

Instrument container image

Next, to instrument the new container image:

  1. In the Layered Insight runtime console, ensure that the ECR registry and credentials are defined (click the Setup icon and the ‘+’ sign on the top right of the screen to add a new container registry). Note the name given to the registry in the console, as this needs to be referenced in the li_add_imagecommand in the script, below.
  2. Next, add a new buildspec (with a new name) to the CodeCommit project, such as the one shown below. This code will download the Layered Insight runtime client, and use it to instruct the Layered Insight service to instrument the image that was just built:
    version: 0.2
    phases:
    pre_build:
    commands:
    echo Pulling down LI API Runtime client scripts
    git clone https://github.com/LayeredInsight/runtime-api-example-python
    echo Setting up LI API client
    cd runtime-api-example-python
    pip install layint-runtime-api
    pip install -r requirements.txt
    build:
    commands:
    echo Instrumentation started on `date`
    ./li_add_image --registry "Javatest ECR" --name IMAGE_NAME:TAG --description "IMAGE DESCRIPTION" --policy "Default Policy" --instrument --wait --verbose
  3. Commit and push the new buildspec file.
  4. Going back to CodeBuild, create a new project, with the same CodeCommit repo, but this time select the new buildspec file. Use a Python 3.3.6 builder – either the AWS or LI Instrumented version.
  5. Click Continue
  6. Click Save
  7. Run the build, again on the master branch.
  8. If everything runs successfully, a new image should appear in the ECR registry with a -layered suffix. This is the instrumented image.

Run instrumented container image

When the instrumented container is now run — in ECS, Fargate, or elsewhere — it will log data back to the Layered Insight runtime console. It’s appearance in the console can be modified by setting the LI_APPLICATIONNAME and LI_LOCATION environment variables when running the container.

Conclusion

In the above blog we have provided you steps needed to embed governance and runtime security in your build pipelines running on AWS CodeBuild using Layered Insight.

 

 

 

Grafana v5.1 Released

Post Syndicated from Blogs on Grafana Labs Blog original https://grafana.com/blog/2018/04/26/grafana-v5.1-released/

v5.1 Stable Release

The recent 5.0 major release contained a lot of new features so the Grafana 5.1 release is focused on smoothing out the rough edges and iterating over some of the new features.

Download Grafana 5.1 Now

Release Highlights

There are two new features included, Heatmap Support for Prometheus and a new core data source for Microsoft SQL Server.

Another highlight is the revamp of the Grafana docker container that makes it easier to run and control but be aware there is a breaking change to file permissions that will affect existing containers with data volumes.

We got tons of useful improvement suggestions, bug reports and Pull Requests from our amazing community. Thank you all! See the full changelog for more details.

Improved Scrolling Experience

In Grafana v5.0 we introduced a new scrollbar component. Unfortunately this introduced a lot of issues and in some scenarios removed
the native scrolling functionality. Grafana v5.1 ships with a native scrollbar for all pages together with a scrollbar component for
the dashboard grid and panels that does not override the native scrolling functionality. We hope that these changes and improvements should
make the Grafana user experience much better!

Improved Docker Image

Grafana v5.1 brings an improved official docker image which should make it easier to run and use the Grafana docker image and at the same time give more control to the user how to use/run it.

We have switched the id of the grafana user running Grafana inside a docker container. Unfortunately this means that files created prior to 5.1 will not have the correct permissions for later versions and thereby introduces a breaking change. We made this change so that it would be easier for you to control what user Grafana is executed as.

Please read the updated documentation which includes migration instructions and more information.

Heatmap Support for Prometheus

The Prometheus datasource now supports transforming Prometheus histograms to the heatmap panel. The Prometheus histogram is a powerful feature, and we’re
really happy to finally allow our users to render those as heatmaps. The Heatmap panel documentation
contains more information on how to use it.

Another improvement is that the Prometheus query editor now supports autocomplete for template variables. More information in the Prometheus data source documentation.

Microsoft SQL Server

Grafana v5.1 now ships with a built-in Microsoft SQL Server (MSSQL) data source plugin that allows you to query and visualize data from any
Microsoft SQL Server 2005 or newer, including Microsoft Azure SQL Database. Do you have metric or log data in MSSQL? You can now visualize
that data and define alert rules on it as with any of Grafana’s other core datasources.

The using Microsoft SQL Server in Grafana documentation has more detailed information on how to get started.

Adding New Panels to Dashboards

The control for adding new panels to dashboards now includes panel search and it is also now possible to copy and paste panels between dashboards.

By copying a panel in a dashboard it will be displayed in the Paste tab. When you switch to a new dashboard you can paste the
copied panel.

Align Zero-Line for Right and Left Y-axes

The feature request to align the zero-line for right and left Y-axes on the Graph panel is more than 3 years old. It has finally been implemented – more information in the Graph panel documentation.

Other Highlights

  • Table Panel: New enhancements includes support for mapping a numeric value/range to text and additional units. More information in the Table panel documentation.
  • New variable interpolation syntax: We now support a new option for rendering variables that gives the user full control of how the value(s) should be rendered. More details in the in the Variables documentation.
  • Improved workflow for provisioned dashboards. More details here.

Changelog

Checkout the CHANGELOG.md file for a complete list
of new features, changes, and bug fixes.

Get Started with Blockchain Using the new AWS Blockchain Templates

Post Syndicated from Jeff Barr original https://aws.amazon.com/blogs/aws/get-started-with-blockchain-using-the-new-aws-blockchain-templates/

Many of today’s discussions around blockchain technology remind me of the classic Shimmer Floor Wax skit. According to Dan Aykroyd, Shimmer is a dessert topping. Gilda Radner claims that it is a floor wax, and Chevy Chase settles the debate and reveals that it actually is both! Some of the people that I talk to see blockchains as the foundation of a new monetary system and a way to facilitate international payments. Others see blockchains as a distributed ledger and immutable data source that can be applied to logistics, supply chain, land registration, crowdfunding, and other use cases. Either way, it is clear that there are a lot of intriguing possibilities and we are working to help our customers use this technology more effectively.

We are launching AWS Blockchain Templates today. These templates will let you launch an Ethereum (either public or private) or Hyperledger Fabric (private) network in a matter of minutes and with just a few clicks. The templates create and configure all of the AWS resources needed to get you going in a robust and scalable fashion.

Launching a Private Ethereum Network
The Ethereum template offers two launch options. The ecs option creates an Amazon ECS cluster within a Virtual Private Cloud (VPC) and launches a set of Docker images in the cluster. The docker-local option also runs within a VPC, and launches the Docker images on EC2 instances. The template supports Ethereum mining, the EthStats and EthExplorer status pages, and a set of nodes that implement and respond to the Ethereum RPC protocol. Both options create and make use of a DynamoDB table for service discovery, along with Application Load Balancers for the status pages.

Here are the AWS Blockchain Templates for Ethereum:

I start by opening the CloudFormation Console in the desired region and clicking Create Stack:

I select Specify an Amazon S3 template URL, enter the URL of the template for the region, and click Next:

I give my stack a name:

Next, I enter the first set of parameters, including the network ID for the genesis block. I’ll stick with the default values for now:

I will also use the default values for the remaining network parameters:

Moving right along, I choose the container orchestration platform (ecs or docker-local, as I explained earlier) and the EC2 instance type for the container nodes:

Next, I choose my VPC and the subnets for the Ethereum network and the Application Load Balancer:

I configure my keypair, EC2 security group, IAM role, and instance profile ARN (full information on the required permissions can be found in the documentation):

The Instance Profile ARN can be found on the summary page for the role:

I confirm that I want to deploy EthStats and EthExplorer, choose the tag and version for the nested CloudFormation templates that are used by this one, and click Next to proceed:

On the next page I specify a tag for the resources that the stack will create, leave the other options as-is, and click Next:

I review all of the parameters and options, acknowledge that the stack might create IAM resources, and click Create to build my network:

The template makes use of three nested templates:

After all of the stacks have been created (mine took about 5 minutes), I can select JeffNet and click the Outputs tab to discover the links to EthStats and EthExplorer:

Here’s my EthStats:

And my EthExplorer:

If I am writing apps that make use of my private network to store and process smart contracts, I would use the EthJsonRpcUrl.

Stay Tuned
My colleagues are eager to get your feedback on these new templates and plan to add new versions of the frameworks as they become available.

Jeff;

 

AWS Online Tech Talks – April & Early May 2018

Post Syndicated from Betsy Chernoff original https://aws.amazon.com/blogs/aws/aws-online-tech-talks-april-early-may-2018/

We have several upcoming tech talks in the month of April and early May. Come join us to learn about AWS services and solution offerings. We’ll have AWS experts online to help answer questions in real-time. Sign up now to learn more, we look forward to seeing you.

Note – All sessions are free and in Pacific Time.

April & early May — 2018 Schedule

Compute

April 30, 2018 | 01:00 PM – 01:45 PM PTBest Practices for Running Amazon EC2 Spot Instances with Amazon EMR (300) – Learn about the best practices for scaling big data workloads as well as process, store, and analyze big data securely and cost effectively with Amazon EMR and Amazon EC2 Spot Instances.

May 1, 2018 | 01:00 PM – 01:45 PM PTHow to Bring Microsoft Apps to AWS (300) – Learn more about how to save significant money by bringing your Microsoft workloads to AWS.

May 2, 2018 | 01:00 PM – 01:45 PM PTDeep Dive on Amazon EC2 Accelerated Computing (300) – Get a technical deep dive on how AWS’ GPU and FGPA-based compute services can help you to optimize and accelerate your ML/DL and HPC workloads in the cloud.

Containers

April 23, 2018 | 11:00 AM – 11:45 AM PTNew Features for Building Powerful Containerized Microservices on AWS (300) – Learn about how this new feature works and how you can start using it to build and run modern, containerized applications on AWS.

Databases

April 23, 2018 | 01:00 PM – 01:45 PM PTElastiCache: Deep Dive Best Practices and Usage Patterns (200) – Learn about Redis-compatible in-memory data store and cache with Amazon ElastiCache.

April 25, 2018 | 01:00 PM – 01:45 PM PTIntro to Open Source Databases on AWS (200) – Learn how to tap the benefits of open source databases on AWS without the administrative hassle.

DevOps

April 25, 2018 | 09:00 AM – 09:45 AM PTDebug your Container and Serverless Applications with AWS X-Ray in 5 Minutes (300) – Learn how AWS X-Ray makes debugging your Container and Serverless applications fun.

Enterprise & Hybrid

April 23, 2018 | 09:00 AM – 09:45 AM PTAn Overview of Best Practices of Large-Scale Migrations (300) – Learn about the tools and best practices on how to migrate to AWS at scale.

April 24, 2018 | 11:00 AM – 11:45 AM PTDeploy your Desktops and Apps on AWS (300) – Learn how to deploy your desktops and apps on AWS with Amazon WorkSpaces and Amazon AppStream 2.0

IoT

May 2, 2018 | 11:00 AM – 11:45 AM PTHow to Easily and Securely Connect Devices to AWS IoT (200) – Learn how to easily and securely connect devices to the cloud and reliably scale to billions of devices and trillions of messages with AWS IoT.

Machine Learning

April 24, 2018 | 09:00 AM – 09:45 AM PT Automate for Efficiency with Amazon Transcribe and Amazon Translate (200) – Learn how you can increase the efficiency and reach your operations with Amazon Translate and Amazon Transcribe.

April 26, 2018 | 09:00 AM – 09:45 AM PT Perform Machine Learning at the IoT Edge using AWS Greengrass and Amazon Sagemaker (200) – Learn more about developing machine learning applications for the IoT edge.

Mobile

April 30, 2018 | 11:00 AM – 11:45 AM PTOffline GraphQL Apps with AWS AppSync (300) – Come learn how to enable real-time and offline data in your applications with GraphQL using AWS AppSync.

Networking

May 2, 2018 | 09:00 AM – 09:45 AM PT Taking Serverless to the Edge (300) – Learn how to run your code closer to your end users in a serverless fashion. Also, David Von Lehman from Aerobatic will discuss how they used [email protected] to reduce latency and cloud costs for their customer’s websites.

Security, Identity & Compliance

April 30, 2018 | 09:00 AM – 09:45 AM PTAmazon GuardDuty – Let’s Attack My Account! (300) – Amazon GuardDuty Test Drive – Practical steps on generating test findings.

May 3, 2018 | 09:00 AM – 09:45 AM PTProtect Your Game Servers from DDoS Attacks (200) – Learn how to use the new AWS Shield Advanced for EC2 to protect your internet-facing game servers against network layer DDoS attacks and application layer attacks of all kinds.

Serverless

April 24, 2018 | 01:00 PM – 01:45 PM PTTips and Tricks for Building and Deploying Serverless Apps In Minutes (200) – Learn how to build and deploy apps in minutes.

Storage

May 1, 2018 | 11:00 AM – 11:45 AM PTBuilding Data Lakes That Cost Less and Deliver Results Faster (300) – Learn how Amazon S3 Select And Amazon Glacier Select increase application performance by up to 400% and reduce total cost of ownership by extending your data lake into cost-effective archive storage.

May 3, 2018 | 11:00 AM – 11:45 AM PTIntegrating On-Premises Vendors with AWS for Backup (300) – Learn how to work with AWS and technology partners to build backup & restore solutions for your on-premises, hybrid, and cloud native environments.

Red Hat Enterprise Linux 7.5 is out

Post Syndicated from ris original https://lwn.net/Articles/751457/rss

Red Hat has announced
the general availability
of Red Hat Enterprise Linux 7.5. This version
features enhanced hybrid cloud security and compliance, improved storage
performance and efficiency, simplified management, and production-ready
Linux containers. RHEL 7.5 is available for x86, IBM Power, IBM z Systems, and 64-bit Arm. This release also brings support for single-host KVM virtualization and Open Container Initiative (OCI)-formatted runtime environment and base image to IBM z Systems.