Tag Archives: estefannie

RaspiReader: build your own fingerprint reader

Post Syndicated from Janina Ander original https://www.raspberrypi.org/blog/raspireader-fingerprint-scanner/

Three researchers from Michigan State University have developed a low-cost, open-source fingerprint reader which can detect fake prints. They call it RaspiReader, and they’ve built it using a Raspberry Pi 3 and two Camera Modules. Joshua and his colleagues have just uploaded all the info you need to build your own version — let’s go!

GIF of fingerprint match points being aligned on fingerprint, not real output of RaspiReader software

Sadly not the real output of the RaspiReader

Falsified fingerprints

We’ve probably all seen a movie in which a burglar crosses a room full of laser tripwires and then enters the safe full of loot by tricking the fingerprint-secured lock with a fake print. Turns out, the second part is not that unrealistic: you can fake fingerprints using a range of materials, such as glue or latex.

Examples of live and fake fingerprints collected by the RaspiReader team

The RaspiReader team collected live and fake fingerprints to test the device

If the spoof print layer capping the spoofer’s finger is thin enough, it can even fool readers that detect blood flow, pulse, or temperature. This is becoming a significant security risk, not least for anyone who unlocks their smartphone using a fingerprint.

The RaspiReader

This is where Anil K. Jain comes in: Professor Jain leads a biometrics research group. Under his guidance, Joshua J. Engelsma and Kai Cao set out to develop a fingerprint reader with improved spoof-print detection. Ultimately, they aim to help the development of more secure commercial technologies. With their project, the team has also created an amazing resource for anyone who wants to build their own fingerprint reader.

So that replicating their device would be easy, they wanted to make it using inexpensive, readily available components, which is why they turned to Raspberry Pi technology.

RaspiReader fingerprint scanner by PRIP lab

The Raspireader and its output

Inside the RaspiReader’s 3D-printed housing, LEDs shine light through an acrylic prism, on top of which the user rests their finger. The prism refracts the light so that the two Camera Modules can take images from different angles. The Pi receives these images via a Multi Camera Adapter Module feeding into the CSI port. Collecting two images means the researchers’ spoof detection algorithm has more information to work with.

Comparison of live and spoof fingerprints

Real on the left, fake on the right

RaspiReader software

The Camera Adaptor uses the RPi.GPIO Python package. The RaspiReader performs image processing, and its spoof detection takes image colour and 3D friction ridge patterns into account. The detection algorithm extracts colour local binary patterns … please don’t ask me to explain! You can have a look at the researchers’ manuscript if you want to get stuck into the fine details of their project.

Build your own fingerprint reader

I’ve had my eyes glued to my inbox waiting for Josh to send me links to instructions and files for this build, and here they are (thanks, Josh)! Check out the video tutorial, which walks you through how to assemble the RaspiReader:

RaspiReader: Cost-Effective Open-Source Fingerprint Reader

Building a cost-effective, open-source, and spoof-resilient fingerprint reader for $160* in under an hour. Code: https://github.com/engelsjo/RaspiReader Links to parts: 1. PRISM – https://www.amazon.com/gp/product/B00WL3OBK4/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 (Better fit) https://www.thorlabs.com/thorproduct.cfm?partnumber=PS611 2. RaspiCams – https://www.amazon.com/gp/product/B012V1HEP4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 3. Camera Multiplexer https://www.amazon.com/gp/product/B012UQWOOQ/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1 4. Raspberry Pi Kit: https://www.amazon.com/CanaKit-Raspberry-Clear-Power-Supply/dp/B01C6EQNNK/ref=sr_1_6?ie=UTF8&qid=1507058509&sr=8-6&keywords=raspberry+pi+3b Whitepaper: https://arxiv.org/abs/1708.07887 * Prices can vary based on Amazon’s pricing. P.s.

You can find a parts list with links to suppliers in the video description — the whole build costs around $160. All the STL files for the housing and the Python scripts you need to run on the Pi are available on Josh’s GitHub.

Enhance your home security

The RaspiReader is a great resource for researchers, and it would also be a terrific project to build at home! Is there a more impressive way to protect a treasured possession, or secure access to your computer, than with a DIY fingerprint scanner?

Check out this James-Bond-themed blog post for Raspberry Pi resources to help you build a high-security lair. If you want even more inspiration, watch this video about a laser-secured cookie jar which Estefannie made for us. And be sure to share your successful fingerprint scanner builds with us via social media!

The post RaspiReader: build your own fingerprint reader appeared first on Raspberry Pi.

Laser Cookies: a YouTube collaboration

Post Syndicated from Alex Bate original https://www.raspberrypi.org/blog/laser-cookies/

Lasers! Cookies! Raspberry Pi! We’re buzzing with excitement about sharing our latest YouTube video with you, which comes directly from the kitchen of maker Estefannie Explains It All!

Laser-guarded cookies feat. Estefannie Explains It All

Uploaded by Raspberry Pi on 2017-09-18.

Estefannie Explains It All + Raspberry Pi

When Estefannie visited Pi Towers earlier this year, we introduced her to the Raspberry Pi Digital Curriculum and the free resources on our website. We’d already chatted to her via email about the idea of creating a collab video for the Raspberry Pi channel. Once she’d met members of the Raspberry Pi Foundation team and listened to them wax lyrical about the work we do here, she was even more keen to collaborate with us.

Estefannie on Twitter

Ahhhh!!! I still can’t believe I got to hang out and make stuff at the @Raspberry_Pi towers!! Thank you thank you!!

Estefannie returned to the US filled with inspiration for a video for our channel, and we’re so pleased with how awesome her final result is. The video is a super addition to our Raspberry Pi YouTube channel, it shows what our resources can help you achieve, and it’s great fun. You might also have noticed that the project fits in perfectly with this season’s Pioneers challenge. A win all around!

So yeah, we’re really chuffed about this video, and we hope you all like it too!

Estefannie’s Laser Cookies guide

For those of you wanting to try your hand at building your own Cookie Jar Laser Surveillance Security System, Estefannie has provided a complete guide to talk you through it. Here she goes:

First off, you’ll need:

  • 10 lasers
  • 10 photoresistors
  • 10 capacitors
  • 1 Raspberry Pi Zero W
  • 1 buzzer
  • 1 Raspberry Pi Camera Module
  • 12 ft PVC pipes + 4 corners
  • 1 acrylic panel
  • 1 battery pack
  • 8 zip ties
  • tons of cookies

I used the Raspberry Pi Foundation’s Laser trip wire and the Tweeting Babbage resources to get one laser working and to set up the camera and Twitter API. This took me less than an hour, and it was easy, breezy, beautiful, Raspberry Pi.


I soldered ten lasers in parallel and connected ten photoresistors to their own GPIO pins. I didn’t wire them up in series because of sensitivity reasons and to make debugging easier.

Building the frame took a few tries: I actually started with a wood frame, then tried a clear case, and finally realized the best and cleaner solution would be pipes. All the wires go inside the pipes and come out in a small window on the top to wire up to the Zero W.



Using pipes also made the build cheaper, since they were about $3 for 12 ft. Wiring inside the pipes was tricky, and to finish the circuit, I soldered some of the wires after they were already in the pipes.

I tried glueing the lasers to the frame, but the lasers melted the glue and became decalibrated. Next I tried tape, and then I found picture mounting putty. The putty worked perfectly — it was easy to mold a putty base for the lasers and to calibrate and re-calibrate them if needed. Moreover, the lasers stayed in place no matter how hot they got.

Estefannie Explains It All Raspberry Pi Cookie Jar

Although the lasers were not very strong, I still strained my eyes after long hours of calibrating — hence the sunglasses! Working indoors with lasers, sunglasses, and code was weird. But now I can say I’ve done that…in my kitchen.

Using all the knowledge I have shared, this project should take a couple of hours. The code you need lives on my GitHub!

Estefannie Explains It All Raspberry Pi Cookie Jar

“The cookie recipe is my grandma’s, and I am not allowed to share it.”

Estefannie on YouTube

Estefannie made this video for us as a gift, and we’re so grateful for the time and effort she put into it! If you enjoyed it and would like to also show your gratitude, subscribe to her channel on YouTube and follow her on Instagram and Twitter. And if you make something similar, or build anything with our free resources, make sure to share it with us in the comments below or via our social media channels.

The post Laser Cookies: a YouTube collaboration appeared first on Raspberry Pi.

Estefannie’s GPS-Controlled GoPro Photo Taker

Post Syndicated from Alex Bate original https://www.raspberrypi.org/blog/estefannie-gopro-selfie/

Are you tired of having to take selfies physically? Do you only use your GoPro for the occasional beach vacation? Are you maybe even wondering what to do with the load of velcro you bought on a whim? Then we have good news for you: Estefannie‘s back to help you out with her Personal Automated GPS-Controlled Portable Photo Taker…PAGCPPT for short…or pagsssspt, if you like.

RASPBERRY PI + GPS CONTROLLED PHOTO TAKER

Hey World! Do you like vacation pictures but don’t like taking them? Make your own Personal Automated GPS Controlled Portable Photo Taker! The code, components, and instructions are in my Hackster.io account: https://www.hackster.io/estefanniegg/automated-gps-controlled-photo-taker-3fc84c For this build, I decided to put together a backpack to take pictures of me when I am close to places that like.

The Personal Automated GPS-Controlled Portable Photo Taker

Try saying that five times in a row.

Go on. I’ll wait.

Using a Raspberry Pi 3, a GPS module, a power pack, and a GoPro plus GoPro Stick, Estefannie created the PAGCPPT as a means of automatically taking selfies at pre-specified tourist attractions across London.

Estefannie Explains it All Raspberry Pi GPS GoPro Camera

There’s pie in my backpack too…but it’s a bit messy

With velcro and hot glue, she secured the tech in place on (and inside) a backpack. Then it was simply a case of programming her set up to take pictures while she walked around the city.

Estefannie Explains it All Raspberry Pi GPS GoPro Camera

Making the GoPro…go

Estefannie made use of a GoPro API library to connect her GoPro to the Raspberry Pi via WiFi. With the help of this library, she wrote a Python script that made the GoPro take a photograph whenever her GPS module placed her within a ten-metre radius of a pre-selected landmark such as Tower Bridge, Abbey Road, or Platform 9 3/4.

Estefannie Explains it All Raspberry Pi GPS GoPro Camera

“Accio selfie.”

The full script, as well as details regarding the components she used for the project, can be found on her hackster.io page here.

Estefannie Explains it All

You’ll have noticed that we’ve covered Estefannie once or twice before on the Raspberry Pi blog. We love project videos that convey a sense of ‘Oh hey, I can totally build one of those!’, and hers always tick that box. They are imaginative, interesting, quirky, and to be totally honest with you, I’ve been waiting for this particular video since she hinted at it on her visit to Pi Towers in May. I got the inside scoop, yo!

What’s better than taking pictures? Not taking pictures. But STILL having pictures. I made a personal automated GPS controlled Portable Photo Taker ⚡ NEW VIDEO ALERT⚡ Link in bio.

1,351 Likes, 70 Comments – Estefannie Explains It All (@estefanniegg) on Instagram: “What’s better than taking pictures? Not taking pictures. But STILL having pictures. I made a…”

Make sure to follow her on YouTube and Instagram for more maker content and random shenanigans. And if you have your own maker social media channel, YouTube account, blog, etc, this is your chance to share it for the world to see in the comments below!

The post Estefannie’s GPS-Controlled GoPro Photo Taker appeared first on Raspberry Pi.

“Only a year? It’s felt like forever”: a twelve-month retrospective

Post Syndicated from Alex Bate original https://www.raspberrypi.org/blog/12-months-raspberry-pi/

This weekend saw my first anniversary at Raspberry Pi, and this blog marks my 100th post written for the company. It would have been easy to let one milestone or the other slide had they not come along hand in hand, begging for some sort of acknowledgement.

Alex, Matt, and Courtney in a punt on the Cam

The day Liz decided to keep me

So here it is!

Joining the crew

Prior to my position in the Comms team as Social Media Editor, my employment history was largely made up of retail sales roles and, before that, bit parts in theatrical backstage crews. I never thought I would work for the Raspberry Pi Foundation, despite its firm position on my Top Five Awesome Places I’d Love to Work list. How could I work for a tech company when my knowledge of tech stretched as far as dismantling my Game Boy when I was a kid to see how the insides worked, or being the one friend everyone went to when their phone didn’t do what it was meant to do? I never thought about the other side of the Foundation coin, or how I could find my place within the hidden workings that turned the cogs that brought everything together.

… when suddenly, as if out of nowhere, a new job with a dream company. #raspberrypi #positive #change #dosomething

12 Likes, 1 Comments – Alex J’rassic (@thealexjrassic) on Instagram: “… when suddenly, as if out of nowhere, a new job with a dream company. #raspberrypi #positive…”

A little luck, a well-written though humorous resumé, and a meeting with Liz and Helen later, I found myself the newest member of the growing team at Pi Towers.

Ticking items off the Bucket List

I thought it would be fun to point out some of the chances I’ve had over the last twelve months and explain how they fit within the world of Raspberry Pi. After all, we’re about more than just a $35 credit card-sized computer. We’re a charitable Foundation made up of some wonderful and exciting projects, people, and goals.

High altitude ballooning (HAB)

Skycademy offers educators in the UK the chance to come to Pi Towers Cambridge to learn how to plan a balloon launch, build a payload with onboard Raspberry Pi and Camera Module, and provide teachers with the skills needed to take their students on an adventure to near space, with photographic evidence to prove it.

All the screens you need to hunt balloons. . We have our landing point and are now rushing to Therford to find the payload in a field. . #HAB #RasppberryPi

332 Likes, 5 Comments – Raspberry Pi (@raspberrypifoundation) on Instagram: “All the screens you need to hunt balloons. . We have our landing point and are now rushing to…”

I was fortunate enough to join Sky Captain James, along with Dan Fisher, Dave Akerman, and Steve Randell on a test launch back in August last year. Testing out new kit that James had still been tinkering with that morning, we headed to a field in Elsworth, near Cambridge, and provided Facebook Live footage of the process from payload build to launch…to the moment when our balloon landed in an RAF shooting range some hours later.

RAF firing range sign

“Can we have our balloon back, please, mister?”

Having enjoyed watching Blue Peter presenters send up a HAB when I was a child, I marked off the event on my bucket list with a bold tick, and I continue to show off the photographs from our Raspberry Pi as it reached near space.

Spend the day launching/chasing a high-altitude balloon. Look how high it went!!! #HAB #ballooning #space #wellspacekinda #ish #photography #uk #highaltitude

13 Likes, 2 Comments – Alex J’rassic (@thealexjrassic) on Instagram: “Spend the day launching/chasing a high-altitude balloon. Look how high it went!!! #HAB #ballooning…”

You can find more information on Skycademy here, plus more detail about our test launch day in Dan’s blog post here.

Dear Raspberry Pi Friends…

My desk is slowly filling with stuff: notes, mementoes, and trinkets that find their way to me from members of the community, both established and new to the life of Pi. There are thank you notes, updates, and more from people I’ve chatted to online as they explore their way around the world of Pi.

Letter of thanks to Raspberry Pi from a young fan

*heart melts*

By plugging myself into social media on a daily basis, I often find hidden treasures that go unnoticed due to the high volume of tags we receive on Facebook, Twitter, Instagram, and so on. Kids jumping off chairs in delight as they complete their first Scratch project, newcomers to the Raspberry Pi shedding a tear as they make an LED blink on their kitchen table, and seasoned makers turning their hobby into something positive to aid others.

It’s wonderful to join in the excitement of people discovering a new skill and exploring the community of Raspberry Pi makers: I’ve been known to shed a tear as a result.

Meeting educators at Bett, chatting to teen makers at makerspaces, and sharing a cupcake or three at the birthday party have been incredible opportunities to get to know you all.

You’re all brilliant.

The Queens of Robots, both shoddy and otherwise

Last year we welcomed the Queen of Shoddy Robots, Simone Giertz to Pi Towers, where we chatted about making, charity, and space while wandering the colleges of Cambridge and hanging out with flat Tim Peake.

Queen of Robots @simonegiertz came to visit #PiTowers today. We hung out with cardboard @astro_timpeake and ate chelsea buns at @fitzbillies #Cambridge. . We also had a great talk about the educational projects of the #RaspberryPi team, #AstroPi and how not enough people realise we’re a #charity. . If you’d like to learn more about the Raspberry Pi Foundation and the work we do with #teachers and #education, check out our website – www.raspberrypi.org. . How was your day? Get up to anything fun?

597 Likes, 3 Comments – Raspberry Pi (@raspberrypifoundation) on Instagram: “Queen of Robots @simonegiertz came to visit #PiTowers today. We hung out with cardboard…”

And last month, the wonderful Estefannie ‘Explains it All’ de La Garza came to hang out, make things, and discuss our educational projects.

Estefannie on Twitter

Ahhhh!!! I still can’t believe I got to hang out and make stuff at the @Raspberry_Pi towers!! Thank you thank you!!

Meeting such wonderful, exciting, and innovative YouTubers was a fantastic inspiration to work on my own projects and to try to do more to help others discover ways to connect with tech through their own interests.

Those ‘wow’ moments

Every Raspberry Pi project I see on a daily basis is awesome. The moment someone takes an idea and does something with it is, in my book, always worthy of awe and appreciation. Whether it be the aforementioned flashing LED, or sending Raspberry Pis to the International Space Station, if you have turned your idea into reality, I applaud you.

Some of my favourite projects over the last twelve months have not only made me say “Wow!”, they’ve also inspired me to want to do more with myself, my time, and my growing maker skill.

Museum in a Box on Twitter

Great to meet @alexjrassic today and nerd out about @Raspberry_Pi and weather balloons and @Space_Station and all things #edtech 🎈⛅🛰📚🤖

Projects such as Museum in a Box, a wonderful hands-on learning aid that brings the world to the hands of children across the globe, honestly made me tear up as I placed a miniaturised 3D-printed Virginia Woolf onto a wooden box and gasped as she started to speak to me.

Jill Ogle’s Let’s Robot project had me in awe as Twitch-controlled Pi robots tackled mazes, attempted to cut birthday cake, or swung to slap Jill in the face over webcam.

Jillian Ogle on Twitter

@SryAbtYourCats @tekn0rebel @Beam Lol speaking of faces… https://t.co/1tqFlMNS31

Every day I discover new, wonderful builds that both make me wish I’d thought of them first, and leave me wondering how they manage to make them work in the first place.

Space

We have Raspberry Pis in space. SPACE. Actually space.

Raspberry Pi on Twitter

New post: Mission accomplished for the European @astro_pi challenge and @esa @Thom_astro is on his way home 🚀 https://t.co/ycTSDR1h1Q

Twelve months later, this still blows my mind.

And let’s not forget…

  • The chance to visit both the Houses of Parliment and St James’s Palace

Raspberry Pi team at the Houses of Parliament

  • Going to a Doctor Who pre-screening and meeting Peter Capaldi, thanks to Clare Sutcliffe

There’s no need to smile when you’re #DoctorWho.

13 Likes, 2 Comments – Alex J’rassic (@thealexjrassic) on Instagram: “There’s no need to smile when you’re #DoctorWho.”

We’re here. Where are you? . . . . . #raspberrypi #vidconeu #vidcon #pizero #zerow #travel #explore #adventure #youtube

1,944 Likes, 30 Comments – Raspberry Pi (@raspberrypifoundation) on Instagram: “We’re here. Where are you? . . . . . #raspberrypi #vidconeu #vidcon #pizero #zerow #travel #explore…”

  • Making a GIF Cam and other builds, and sharing them with you all via the blog

Made a Gif Cam using a Raspberry Pi, Pi camera, button and a couple LEDs. . When you press the button, it takes 8 images and stitches them into a gif file. The files then appear on my MacBook. . Check out our Twitter feed (Raspberry_Pi) for examples! . Next step is to fit it inside a better camera body. . #DigitalMaking #Photography #Making #Camera #Gif #MakersGonnaMake #LED #Creating #PhotosofInstagram #RaspberryPi

19 Likes, 1 Comments – Alex J’rassic (@thealexjrassic) on Instagram: “Made a Gif Cam using a Raspberry Pi, Pi camera, button and a couple LEDs. . When you press the…”

The next twelve months

Despite Eben jokingly firing me near-weekly across Twitter, or Philip giving me the ‘Dad glare’ when I pull wires and buttons out of a box under my desk to start yet another project, I don’t plan on going anywhere. Over the next twelve months, I hope to continue discovering awesome Pi builds, expanding on my own skills, and curating some wonderful projects for you via the Raspberry Pi blog, the Raspberry Pi Weekly newsletter, my submissions to The MagPi Magazine, and the occasional video interview or two.

It’s been a pleasure. Thank you for joining me on the ride!

The post “Only a year? It’s felt like forever”: a twelve-month retrospective appeared first on Raspberry Pi.

Estefannie’s Automated French Press

Post Syndicated from Alex Bate original https://www.raspberrypi.org/blog/estefannie-automated-french-press/

Why press a french press when the french press can press itself? Here’s Estefannie to explain it all…

Internet Button Controlled Automated French Press

Hey World! What’s better than making coffee? Not making coffee. But still drinking coffee. I decided to make my own automated French Press machine. To automate it, I used a Raspberry Pi, a Photon (Internet Button), two stepper motors, wood, glue, and a lot of imagination.

Okay, okay. I’m sure you get it by now. Here at Pi Towers, we love a good coffee hack. In truth, we love any coffee hack. And we also love Estefannie … so you can see where today’s blog is going.

Building an automated french press

For the build, Estefannie uses the Particle Internet Button to tell a wooden castle when it’s ready to press her coffee. Wooden castle? We’ll get there – hold on.

Estefannie Explains it All Raspberry Pi French Press

Wait, I said hold on … never mind.

The Internet Button houses a Photon, a small programmable WiFi development board for Internet of Things (IoT) prototyping. Alongside RGB LEDs, tactile buttons, and an accelerometer, the Internet Button allows wireless control, via the cloud, to the Raspberry Pi. Perfect for the self-pressing french press.

Esteffannie Explains it All Raspberry Pi French Press

Like so…

So, wooden castles? Two wooden castles act as housings for servo-powered screws that raise and lower the french press pressing bar. When the coffee is ready to be pressed, they turn in one direction, lowering the bar. When the press is complete, they turn the other way to raise it, giving access to the perfectly brewed coffee. Everything is controlled using Python code on the Raspberry Pi, triggered by the press of the Internet Button.

Esteffannie Explains it All Raspberry Pi French Press

The button has three states. Green indicates that everything is ready to press. Magenta indicates the four-minute brew time, and a rainbow tells you that your coffee is ready for consumption. Beautiful.

Automate your own

Once you have perfected the basic build, the same rig could be used to automate no end of household chores. How about setting a timer to slowly press tofu? Turning the rig on its side to open and close a door? Or how about raising and lowing the bar much more quickly to plunger the toilet? Too much? Yeah, I thought the same as I typed it.

You can find the code for the build on Estefannie’s Github. I also suggest subscribing to her YouTube channel for more fun tech hacks and Raspberry Pi builds.

Afterthought

If Simone Giertz is the Queen of Sh!tty Robots, is it fair to say that Estefannie is rightly claiming her spot at the Queen of un-Sh!tty ones?

The post Estefannie’s Automated French Press appeared first on Raspberry Pi.

Estefannie’s Smart Gingerbread House

Post Syndicated from Alex Bate original https://www.raspberrypi.org/blog/estefannies-smart-gingerbread-house/

Having recently discovered her through Instagram, we love the videos that have been coming through from Estefannie ‘Explains It All’ De la Garza.

As a “Software Engineer by day, Game Dev and YouTuber by night”, Estefannie is no stranger to digital making. And with her new YouTube channel, she’s started sharing the experience of physical making with the world.

Viewers can watch her as she learns how to solder, or builds a sensor-controller BB-8 pumpkin. And, just in time for Christmas, you can share the experience of building an automated gingerbread house.

The gingerbread house uses LEDs, servos, an Arduino and Raspberry Pi, all powered by a solar panel on the roof, to offer up an app-controlled light show, dancing gingerbread men and a working automatic door.

As far as automated baked goods go, this one definitely…takes the biscuit.

As with all great makers, Estefannie provides the code for her creation on her GitHub page, allowing everyone the chance to pimp up their own gingerbread houses this holiday season. So grab some tech, turn on the oven and lets get making baking making!

SMART GINGERBREAD HOUSE | KITCHEN HACKS

Hey World! I’ve always wanted a smart house, so I made a SMART GINGERBREAD HOUSE!!! Check out my version of an automated gingerbread house using an Arduino, Raspberry Pi, solar panel, servos, and LEDs. I hooked up all the lights and servos to an Arduino which is controlled by a website that is hosted in my Raspberry Pi.

The post Estefannie’s Smart Gingerbread House appeared first on Raspberry Pi.