Tag Archives: ICE

Welcome Jack — Data Center Tech

Post Syndicated from Yev original https://www.backblaze.com/blog/welcome-jack-data-center-tech/

As we shoot way past 500 petabytes of data stored, we need a lot of helping hands in the data center to keep those hard drives spinning! We’ve been hiring quite a lot, and our latest addition is Jack. Lets learn a bit more about him, shall we?

What is your Backblaze Title?
Data Center Tech

Where are you originally from?
Walnut Creek, CA until 7th grade when the family moved to Durango, Colorado.

What attracted you to Backblaze?
I had heard about how cool the Backblaze community is and have always been fascinated by technology.

What do you expect to learn while being at Backblaze?
I expect to learn a lot about how our data centers run and all of the hardware behind it.

Where else have you worked?
Garrhs HVAC as an HVAC Installer and then Durango Electrical as a Low Volt Technician.

Where did you go to school?
Durango High School and then Montana State University.

What’s your dream job?
I would love to be a driver for the Audi Sport. Race cars are so much fun!

Favorite place you’ve traveled?
Iceland has definitely been my favorite so far.

Favorite hobby?
Video games.

Of what achievement are you most proud?
Getting my Eagle Scout badge was a tough, but rewarding experience that I will always cherish.

Star Trek or Star Wars?
Star Wars.

Coke or Pepsi?
Coke…I know, it’s bad.

Favorite food?
Thai food.

Why do you like certain things?
I tend to warm up to things the more time I spend around them, although I never really know until it happens.

Anything else you’d like to tell us?
I’m a friendly car guy who will always be in love with my European cars and I really enjoy the Backblaze community!

We’re happy you joined us Out West! Welcome aboard Jack!

The post Welcome Jack — Data Center Tech appeared first on Backblaze Blog | Cloud Storage & Cloud Backup.

openSUSE Leap 15 released

Post Syndicated from ris original https://lwn.net/Articles/755670/rss

OpenSUSE Leap 15 has been released.
With a brand new look developed by the community, openSUSE Leap 15
brings plenty of community packages built on top of a core from SUSE Linux
Enterprise (SLE) 15 sources, with the two major releases being built in
parallel from the beginning for the first time. Leap 15 shares a common
core with SLE 15, which is due for release in the coming months. The first
release of Leap was version 42.1, and it was based on the first Service
Pack (SP1) of SLE 12. Three years later SUSE’s enterprise version and
openSUSE’s community version are now aligned at 15 with a fresh
rebase.
” Leap 15 will receive maintenance and security updates for
at least 3 years.

Protecting your API using Amazon API Gateway and AWS WAF — Part I

Post Syndicated from Chris Munns original https://aws.amazon.com/blogs/compute/protecting-your-api-using-amazon-api-gateway-and-aws-waf-part-i/

This post courtesy of Thiago Morais, AWS Solutions Architect

When you build web applications or expose any data externally, you probably look for a platform where you can build highly scalable, secure, and robust REST APIs. As APIs are publicly exposed, there are a number of best practices for providing a secure mechanism to consumers using your API.

Amazon API Gateway handles all the tasks involved in accepting and processing up to hundreds of thousands of concurrent API calls, including traffic management, authorization and access control, monitoring, and API version management.

In this post, I show you how to take advantage of the regional API endpoint feature in API Gateway, so that you can create your own Amazon CloudFront distribution and secure your API using AWS WAF.

AWS WAF is a web application firewall that helps protect your web applications from common web exploits that could affect application availability, compromise security, or consume excessive resources.

As you make your APIs publicly available, you are exposed to attackers trying to exploit your services in several ways. The AWS security team published a whitepaper solution using AWS WAF, How to Mitigate OWASP’s Top 10 Web Application Vulnerabilities.

Regional API endpoints

Edge-optimized APIs are endpoints that are accessed through a CloudFront distribution created and managed by API Gateway. Before the launch of regional API endpoints, this was the default option when creating APIs using API Gateway. It primarily helped to reduce latency for API consumers that were located in different geographical locations than your API.

When API requests predominantly originate from an Amazon EC2 instance or other services within the same AWS Region as the API is deployed, a regional API endpoint typically lowers the latency of connections. It is recommended for such scenarios.

For better control around caching strategies, customers can use their own CloudFront distribution for regional APIs. They also have the ability to use AWS WAF protection, as I describe in this post.

Edge-optimized API endpoint

The following diagram is an illustrated example of the edge-optimized API endpoint where your API clients access your API through a CloudFront distribution created and managed by API Gateway.

Regional API endpoint

For the regional API endpoint, your customers access your API from the same Region in which your REST API is deployed. This helps you to reduce request latency and particularly allows you to add your own content delivery network, as needed.

Walkthrough

In this section, you implement the following steps:

  • Create a regional API using the PetStore sample API.
  • Create a CloudFront distribution for the API.
  • Test the CloudFront distribution.
  • Set up AWS WAF and create a web ACL.
  • Attach the web ACL to the CloudFront distribution.
  • Test AWS WAF protection.

Create the regional API

For this walkthrough, use an existing PetStore API. All new APIs launch by default as the regional endpoint type. To change the endpoint type for your existing API, choose the cog icon on the top right corner:

After you have created the PetStore API on your account, deploy a stage called “prod” for the PetStore API.

On the API Gateway console, select the PetStore API and choose Actions, Deploy API.

For Stage name, type prod and add a stage description.

Choose Deploy and the new API stage is created.

Use the following AWS CLI command to update your API from edge-optimized to regional:

aws apigateway update-rest-api \
--rest-api-id {rest-api-id} \
--patch-operations op=replace,path=/endpointConfiguration/types/EDGE,value=REGIONAL

A successful response looks like the following:

{
    "description": "Your first API with Amazon API Gateway. This is a sample API that integrates via HTTP with your demo Pet Store endpoints", 
    "createdDate": 1511525626, 
    "endpointConfiguration": {
        "types": [
            "REGIONAL"
        ]
    }, 
    "id": "{api-id}", 
    "name": "PetStore"
}

After you change your API endpoint to regional, you can now assign your own CloudFront distribution to this API.

Create a CloudFront distribution

To make things easier, I have provided an AWS CloudFormation template to deploy a CloudFront distribution pointing to the API that you just created. Click the button to deploy the template in the us-east-1 Region.

For Stack name, enter RegionalAPI. For APIGWEndpoint, enter your API FQDN in the following format:

{api-id}.execute-api.us-east-1.amazonaws.com

After you fill out the parameters, choose Next to continue the stack deployment. It takes a couple of minutes to finish the deployment. After it finishes, the Output tab lists the following items:

  • A CloudFront domain URL
  • An S3 bucket for CloudFront access logs
Output from CloudFormation

Output from CloudFormation

Test the CloudFront distribution

To see if the CloudFront distribution was configured correctly, use a web browser and enter the URL from your distribution, with the following parameters:

https://{your-distribution-url}.cloudfront.net/{api-stage}/pets

You should get the following output:

[
  {
    "id": 1,
    "type": "dog",
    "price": 249.99
  },
  {
    "id": 2,
    "type": "cat",
    "price": 124.99
  },
  {
    "id": 3,
    "type": "fish",
    "price": 0.99
  }
]

Set up AWS WAF and create a web ACL

With the new CloudFront distribution in place, you can now start setting up AWS WAF to protect your API.

For this demo, you deploy the AWS WAF Security Automations solution, which provides fine-grained control over the requests attempting to access your API.

For more information about deployment, see Automated Deployment. If you prefer, you can launch the solution directly into your account using the following button.

For CloudFront Access Log Bucket Name, add the name of the bucket created during the deployment of the CloudFormation stack for your CloudFront distribution.

The solution allows you to adjust thresholds and also choose which automations to enable to protect your API. After you finish configuring these settings, choose Next.

To start the deployment process in your account, follow the creation wizard and choose Create. It takes a few minutes do finish the deployment. You can follow the creation process through the CloudFormation console.

After the deployment finishes, you can see the new web ACL deployed on the AWS WAF console, AWSWAFSecurityAutomations.

Attach the AWS WAF web ACL to the CloudFront distribution

With the solution deployed, you can now attach the AWS WAF web ACL to the CloudFront distribution that you created earlier.

To assign the newly created AWS WAF web ACL, go back to your CloudFront distribution. After you open your distribution for editing, choose General, Edit.

Select the new AWS WAF web ACL that you created earlier, AWSWAFSecurityAutomations.

Save the changes to your CloudFront distribution and wait for the deployment to finish.

Test AWS WAF protection

To validate the AWS WAF Web ACL setup, use Artillery to load test your API and see AWS WAF in action.

To install Artillery on your machine, run the following command:

$ npm install -g artillery

After the installation completes, you can check if Artillery installed successfully by running the following command:

$ artillery -V
$ 1.6.0-12

As the time of publication, Artillery is on version 1.6.0-12.

One of the WAF web ACL rules that you have set up is a rate-based rule. By default, it is set up to block any requesters that exceed 2000 requests under 5 minutes. Try this out.

First, use cURL to query your distribution and see the API output:

$ curl -s https://{distribution-name}.cloudfront.net/prod/pets
[
  {
    "id": 1,
    "type": "dog",
    "price": 249.99
  },
  {
    "id": 2,
    "type": "cat",
    "price": 124.99
  },
  {
    "id": 3,
    "type": "fish",
    "price": 0.99
  }
]

Based on the test above, the result looks good. But what if you max out the 2000 requests in under 5 minutes?

Run the following Artillery command:

artillery quick -n 2000 --count 10  https://{distribution-name}.cloudfront.net/prod/pets

What you are doing is firing 2000 requests to your API from 10 concurrent users. For brevity, I am not posting the Artillery output here.

After Artillery finishes its execution, try to run the cURL request again and see what happens:

 

$ curl -s https://{distribution-name}.cloudfront.net/prod/pets

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<HTML><HEAD><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<TITLE>ERROR: The request could not be satisfied</TITLE>
</HEAD><BODY>
<H1>ERROR</H1>
<H2>The request could not be satisfied.</H2>
<HR noshade size="1px">
Request blocked.
<BR clear="all">
<HR noshade size="1px">
<PRE>
Generated by cloudfront (CloudFront)
Request ID: [removed]
</PRE>
<ADDRESS>
</ADDRESS>
</BODY></HTML>

As you can see from the output above, the request was blocked by AWS WAF. Your IP address is removed from the blocked list after it falls below the request limit rate.

Conclusion

In this first part, you saw how to use the new API Gateway regional API endpoint together with Amazon CloudFront and AWS WAF to secure your API from a series of attacks.

In the second part, I will demonstrate some other techniques to protect your API using API keys and Amazon CloudFront custom headers.

Use Slack ChatOps to Deploy Your Code – How to Integrate Your Pipeline in AWS CodePipeline with Your Slack Channel

Post Syndicated from Rumi Olsen original https://aws.amazon.com/blogs/devops/use-slack-chatops-to-deploy-your-code-how-to-integrate-your-pipeline-in-aws-codepipeline-with-your-slack-channel/

Slack is widely used by DevOps and development teams to communicate status. Typically, when a build has been tested and is ready to be promoted to a staging environment, a QA engineer or DevOps engineer kicks off the deployment. Using Slack in a ChatOps collaboration model, the promotion can be done in a single click from a Slack channel. And because the promotion happens through a Slack channel, the whole development team knows what’s happening without checking email.

In this blog post, I will show you how to integrate AWS services with a Slack application. I use an interactive message button and incoming webhook to promote a stage with a single click.

To follow along with the steps in this post, you’ll need a pipeline in AWS CodePipeline. If you don’t have a pipeline, the fastest way to create one for this use case is to use AWS CodeStar. Go to the AWS CodeStar console and select the Static Website template (shown in the screenshot). AWS CodeStar will create a pipeline with an AWS CodeCommit repository and an AWS CodeDeploy deployment for you. After the pipeline is created, you will need to add a manual approval stage.

You’ll also need to build a Slack app with webhooks and interactive components, write two Lambda functions, and create an API Gateway API and a SNS topic.

As you’ll see in the following diagram, when I make a change and merge a new feature into the master branch in AWS CodeCommit, the check-in kicks off my CI/CD pipeline in AWS CodePipeline. When CodePipeline reaches the approval stage, it sends a notification to Amazon SNS, which triggers an AWS Lambda function (ApprovalRequester).

The Slack channel receives a prompt that looks like the following screenshot. When I click Yes to approve the build promotion, the approval result is sent to CodePipeline through API Gateway and Lambda (ApprovalHandler). The pipeline continues on to deploy the build to the next environment.

Create a Slack app

For App Name, type a name for your app. For Development Slack Workspace, choose the name of your workspace. You’ll see in the following screenshot that my workspace is AWS ChatOps.

After the Slack application has been created, you will see the Basic Information page, where you can create incoming webhooks and enable interactive components.

To add incoming webhooks:

  1. Under Add features and functionality, choose Incoming Webhooks. Turn the feature on by selecting Off, as shown in the following screenshot.
  2. Now that the feature is turned on, choose Add New Webhook to Workspace. In the process of creating the webhook, Slack lets you choose the channel where messages will be posted.
  3. After the webhook has been created, you’ll see its URL. You will use this URL when you create the Lambda function.

If you followed the steps in the post, the pipeline should look like the following.

Write the Lambda function for approval requests

This Lambda function is invoked by the SNS notification. It sends a request that consists of an interactive message button to the incoming webhook you created earlier.  The following sample code sends the request to the incoming webhook. WEBHOOK_URL and SLACK_CHANNEL are the environment variables that hold values of the webhook URL that you created and the Slack channel where you want the interactive message button to appear.

# This function is invoked via SNS when the CodePipeline manual approval action starts.
# It will take the details from this approval notification and sent an interactive message to Slack that allows users to approve or cancel the deployment.

import os
import json
import logging
import urllib.parse

from base64 import b64decode
from urllib.request import Request, urlopen
from urllib.error import URLError, HTTPError

# This is passed as a plain-text environment variable for ease of demonstration.
# Consider encrypting the value with KMS or use an encrypted parameter in Parameter Store for production deployments.
SLACK_WEBHOOK_URL = os.environ['SLACK_WEBHOOK_URL']
SLACK_CHANNEL = os.environ['SLACK_CHANNEL']

logger = logging.getLogger()
logger.setLevel(logging.INFO)

def lambda_handler(event, context):
    print("Received event: " + json.dumps(event, indent=2))
    message = event["Records"][0]["Sns"]["Message"]
    
    data = json.loads(message) 
    token = data["approval"]["token"]
    codepipeline_name = data["approval"]["pipelineName"]
    
    slack_message = {
        "channel": SLACK_CHANNEL,
        "text": "Would you like to promote the build to production?",
        "attachments": [
            {
                "text": "Yes to deploy your build to production",
                "fallback": "You are unable to promote a build",
                "callback_id": "wopr_game",
                "color": "#3AA3E3",
                "attachment_type": "default",
                "actions": [
                    {
                        "name": "deployment",
                        "text": "Yes",
                        "style": "danger",
                        "type": "button",
                        "value": json.dumps({"approve": True, "codePipelineToken": token, "codePipelineName": codepipeline_name}),
                        "confirm": {
                            "title": "Are you sure?",
                            "text": "This will deploy the build to production",
                            "ok_text": "Yes",
                            "dismiss_text": "No"
                        }
                    },
                    {
                        "name": "deployment",
                        "text": "No",
                        "type": "button",
                        "value": json.dumps({"approve": False, "codePipelineToken": token, "codePipelineName": codepipeline_name})
                    }  
                ]
            }
        ]
    }

    req = Request(SLACK_WEBHOOK_URL, json.dumps(slack_message).encode('utf-8'))

    response = urlopen(req)
    response.read()
    
    return None

 

Create a SNS topic

Create a topic and then create a subscription that invokes the ApprovalRequester Lambda function. You can configure the manual approval action in the pipeline to send a message to this SNS topic when an approval action is required. When the pipeline reaches the approval stage, it sends a notification to this SNS topic. SNS publishes a notification to all of the subscribed endpoints. In this case, the Lambda function is the endpoint. Therefore, it invokes and executes the Lambda function. For information about how to create a SNS topic, see Create a Topic in the Amazon SNS Developer Guide.

Write the Lambda function for handling the interactive message button

This Lambda function is invoked by API Gateway. It receives the result of the interactive message button whether or not the build promotion was approved. If approved, an API call is made to CodePipeline to promote the build to the next environment. If not approved, the pipeline stops and does not move to the next stage.

The Lambda function code might look like the following. SLACK_VERIFICATION_TOKEN is the environment variable that contains your Slack verification token. You can find your verification token under Basic Information on Slack manage app page. When you scroll down, you will see App Credential. Verification token is found under the section.

# This function is triggered via API Gateway when a user acts on the Slack interactive message sent by approval_requester.py.

from urllib.parse import parse_qs
import json
import os
import boto3

SLACK_VERIFICATION_TOKEN = os.environ['SLACK_VERIFICATION_TOKEN']

#Triggered by API Gateway
#It kicks off a particular CodePipeline project
def lambda_handler(event, context):
	#print("Received event: " + json.dumps(event, indent=2))
	body = parse_qs(event['body'])
	payload = json.loads(body['payload'][0])

	# Validate Slack token
	if SLACK_VERIFICATION_TOKEN == payload['token']:
		send_slack_message(json.loads(payload['actions'][0]['value']))
		
		# This will replace the interactive message with a simple text response.
		# You can implement a more complex message update if you would like.
		return  {
			"isBase64Encoded": "false",
			"statusCode": 200,
			"body": "{\"text\": \"The approval has been processed\"}"
		}
	else:
		return  {
			"isBase64Encoded": "false",
			"statusCode": 403,
			"body": "{\"error\": \"This request does not include a vailid verification token.\"}"
		}


def send_slack_message(action_details):
	codepipeline_status = "Approved" if action_details["approve"] else "Rejected"
	codepipeline_name = action_details["codePipelineName"]
	token = action_details["codePipelineToken"] 

	client = boto3.client('codepipeline')
	response_approval = client.put_approval_result(
							pipelineName=codepipeline_name,
							stageName='Approval',
							actionName='ApprovalOrDeny',
							result={'summary':'','status':codepipeline_status},
							token=token)
	print(response_approval)

 

Create the API Gateway API

  1. In the Amazon API Gateway console, create a resource called InteractiveMessageHandler.
  2. Create a POST method.
    • For Integration type, choose Lambda Function.
    • Select Use Lambda Proxy integration.
    • From Lambda Region, choose a region.
    • In Lambda Function, type a name for your function.
  3.  Deploy to a stage.

For more information, see Getting Started with Amazon API Gateway in the Amazon API Developer Guide.

Now go back to your Slack application and enable interactive components.

To enable interactive components for the interactive message (Yes) button:

  1. Under Features, choose Interactive Components.
  2. Choose Enable Interactive Components.
  3. Type a request URL in the text box. Use the invoke URL in Amazon API Gateway that will be called when the approval button is clicked.

Now that all the pieces have been created, run the solution by checking in a code change to your CodeCommit repo. That will release the change through CodePipeline. When the CodePipeline comes to the approval stage, it will prompt to your Slack channel to see if you want to promote the build to your staging or production environment. Choose Yes and then see if your change was deployed to the environment.

Conclusion

That is it! You have now created a Slack ChatOps solution using AWS CodeCommit, AWS CodePipeline, AWS Lambda, Amazon API Gateway, and Amazon Simple Notification Service.

Now that you know how to do this Slack and CodePipeline integration, you can use the same method to interact with other AWS services using API Gateway and Lambda. You can also use Slack’s slash command to initiate an action from a Slack channel, rather than responding in the way demonstrated in this post.

Replacing macOS Server with Synology NAS

Post Syndicated from Roderick Bauer original https://www.backblaze.com/blog/replacing-macos-server-with-synology-nas/

Synology NAS boxes backed up to the cloud

Businesses and organizations that rely on macOS server for essential office and data services are facing some decisions about the future of their IT services.

Apple recently announced that it is deprecating a significant portion of essential network services in macOS Server, as they described in a support statement posted on April 24, 2018, “Prepare for changes to macOS Server.” Apple’s note includes:

macOS Server is changing to focus more on management of computers, devices, and storage on your network. As a result, some changes are coming in how Server works. A number of services will be deprecated, and will be hidden on new installations of an update to macOS Server coming in spring 2018.

The note lists the services that will be removed in a future release of macOS Server, including calendar and contact support, Dynamic Host Configuration Protocol (DHCP), Domain Name Services (DNS), mail, instant messages, virtual private networking (VPN), NetInstall, Web server, and the Wiki.

Apple assures users who have already configured any of the listed services that they will be able to use them in the spring 2018 macOS Server update, but the statement ends with links to a number of alternative services, including hosted services, that macOS Server users should consider as viable replacements to the features it is removing. These alternative services are all FOSS (Free and Open-Source Software).

As difficult as this could be for organizations that use macOS server, this is not unexpected. Apple left the server hardware space back in 2010, when Steve Jobs announced the company was ending its line of Xserve rackmount servers, which were introduced in May, 2002. Since then, macOS Server has hardly been a prominent part of Apple’s product lineup. It’s not just the product itself that has lost some luster, but the entire category of SMB office and business servers, which has been undergoing a gradual change in recent years.

Some might wonder how important the news about macOS Server is, given that macOS Server represents a pretty small share of the server market. macOS Server has been important to design shops, agencies, education users, and small businesses that likely have been on Macs for ages, but it’s not a significant part of the IT infrastructure of larger organizations and businesses.

What Comes After macOS Server?

Lovers of macOS Server don’t have to fear having their Mac minis pried from their cold, dead hands quite yet. Installed services will continue to be available. In the fall of 2018, new installations and upgrades of macOS Server will require users to migrate most services to other software. Since many of the services of macOS Server were already open-source, this means that a change in software might not be required. It does mean more configuration and management required from those who continue with macOS Server, however.

Users can continue with macOS Server if they wish, but many will see the writing on the wall and look for a suitable substitute.

The Times They Are A-Changin’

For many people working in organizations, what is significant about this announcement is how it reflects the move away from the once ubiquitous server-based IT infrastructure. Services that used to be centrally managed and office-based, such as storage, file sharing, communications, and computing, have moved to the cloud.

In selecting the next office IT platforms, there’s an opportunity to move to solutions that reflect and support how people are working and the applications they are using both in the office and remotely. For many, this means including cloud-based services in office automation, backup, and business continuity/disaster recovery planning. This includes Software as a Service, Platform as a Service, and Infrastructure as a Service (Saas, PaaS, IaaS) options.

IT solutions that integrate well with the cloud are worth strong consideration for what comes after a macOS Server-based environment.

Synology NAS as a macOS Server Alternative

One solution that is becoming popular is to replace macOS Server with a device that has the ability to provide important office services, but also bridges the office and cloud environments. Using Network-Attached Storage (NAS) to take up the server slack makes a lot of sense. Many customers are already using NAS for file sharing, local data backup, automatic cloud backup, and other uses. In the case of Synology, their operating system, Synology DiskStation Manager (DSM), is Linux based, and integrates the basic functions of file sharing, centralized backup, RAID storage, multimedia streaming, virtual storage, and other common functions.

Synology NAS box

Synology NAS

Since DSM is based on Linux, there are numerous server applications available, including many of the same ones that are available for macOS Server, which shares conceptual roots with Linux as it comes from BSD Unix.

Synology DiskStation Manager Package Center screenshot

Synology DiskStation Manager Package Center

According to Ed Lukacs, COO at 2FIFTEEN Systems Management in Salt Lake City, their customers have found the move from macOS Server to Synology NAS not only painless, but positive. DSM works seamlessly with macOS and has been faster for their customers, as well. Many of their customers are running Adobe Creative Suite and Google G Suite applications, so a workflow that combines local storage, remote access, and the cloud, is already well known to them. Remote users are supported by Synology’s QuickConnect or VPN.

Business continuity and backup are simplified by the flexible storage capacity of the NAS. Synology has built-in backup to Backblaze B2 Cloud Storage with Synology’s Cloud Sync, as well as a choice of a number of other B2-compatible applications, such as Cloudberry, Comet, and Arq.

Customers have been able to get up and running quickly, with only initial data transfers requiring some time to complete. After that, management of the NAS can be handled in-house or with the support of a Managed Service Provider (MSP).

Are You Sticking with macOS Server or Moving to Another Platform?

If you’re affected by this change in macOS Server, please let us know in the comments how you’re planning to cope. Are you using Synology NAS for server services? Please tell us how that’s working for you.

The post Replacing macOS Server with Synology NAS appeared first on Backblaze Blog | Cloud Storage & Cloud Backup.

Security updates for Thursday

Post Syndicated from ris original https://lwn.net/Articles/755540/rss

Security updates have been issued by Debian (imagemagick), Fedora (curl, glibc, kernel, and thunderbird-enigmail), openSUSE (enigmail, knot, and python), Oracle (procps-ng), Red Hat (librelp, procps-ng, redhat-virtualization-host, rhev-hypervisor7, and unboundid-ldapsdk), Scientific Linux (procps-ng), SUSE (bash, ceph, icu, kvm, and qemu), and Ubuntu (procps and spice, spice-protocol).

HackSpace magazine 7: Internet of Everything

Post Syndicated from Andrew Gregory original https://www.raspberrypi.org/blog/hackspace-magazine-7-internet-of-everything/

We’re usually averse to buzzwords at HackSpace magazine, but not this month: in issue 7, we’re taking a deep dive into the Internet of Things.HackSpace magazine issue 7 cover

Internet of Things (IoT)

To many people, IoT is a shady term used by companies to sell you something you already own, but this time with WiFi; to us, it’s a way to make our builds smarter, more useful, and more connected. In HackSpace magazine #7, you can join us on a tour of the boards that power IoT projects, marvel at the ways in which other makers are using IoT, and get started with your first IoT project!

Awesome projects

DIY retro computing: this issue, we’re taking our collective hat off to Spencer Owen. He stuck his home-brew computer on Tindie thinking he might make a bit of beer money — now he’s paying the mortgage with his making skills and inviting others to build modules for his machine. And if that tickles your fancy, why not take a crack at our Z80 tutorial? Get out your breadboard, assemble your jumper wires, and prepare to build a real-life computer!

Inside HackSpace magazine issue 7

Shameless patriotism: combine Lego, Arduino, and the car of choice for 1960 gold bullion thieves, and you’ve got yourself a groovy weekend project. We proudly present to you one man’s epic quest to add LED lights (controllable via a smartphone!) to his daughter’s LEGO Mini Cooper.

Makerspaces

Patriotism intensifies: for the last 200-odd years, the Black Country has been a hotbed of making. Urban Hax, based in Walsall, is the latest makerspace to show off its riches in the coveted Space of the Month pages. Every space has its own way of doing things, but not every space has a portrait of Rob Halford on the wall. All hail!

Inside HackSpace magazine issue 7

Diversity: advice on diversity often boils down to ‘Be nice to people’, which might feel more vague than actionable. This is where we come in to help: it is truly worth making the effort to give people of all backgrounds access to your makerspace, so we take a look at why it’s nice to be nice, and at the ways in which one makerspace has put niceness into practice — with great results.

And there’s more!

We also show you how to easily calculate the size and radius of laser-cut gears, use a bank of LEDs to etch PCBs in your own mini factory, and use chemistry to mess with your lunch menu.

Inside HackSpace magazine issue 7
Helen Steer inside HackSpace magazine issue 7
Inside HackSpace magazine issue 7

All this plus much, much more waits for you in HackSpace magazine issue 7!

Get your copy of HackSpace magazine

If you like the sound of that, you can find HackSpace magazine in WHSmith, Tesco, Sainsbury’s, and independent newsagents in the UK. If you live in the US, check out your local Barnes & Noble, Fry’s, or Micro Center next week. We’re also shipping to stores in Australia, Hong Kong, Canada, Singapore, Belgium, and Brazil, so be sure to ask your local newsagent whether they’ll be getting HackSpace magazine.

And if you can’t get to the shops, fear not: you can subscribe from £4 an issue from our online shop. And if you’d rather try before you buy, you can always download the free PDF. Happy reading, and happy making!

The post HackSpace magazine 7: Internet of Everything appeared first on Raspberry Pi.

The devil wears Pravda

Post Syndicated from Robert Graham original https://blog.erratasec.com/2018/05/the-devil-wears-pravda.html

Classic Bond villain, Elon Musk, has a new plan to create a website dedicated to measuring the credibility and adherence to “core truth” of journalists. He is, without any sense of irony, going to call this “Pravda”. This is not simply wrong but evil.

Musk has a point. Journalists do suck, and many suck consistently. I see this in my own industry, cybersecurity, and I frequently criticize them for their suckage.

But what he’s doing here is not correcting them when they make mistakes (or what Musk sees as mistakes), but questioning their legitimacy. This legitimacy isn’t measured by whether they follow established journalism ethics, but whether their “core truths” agree with Musk’s “core truths”.

An example of the problem is how the press fixates on Tesla car crashes due to its “autopilot” feature. Pretty much every autopilot crash makes national headlines, while the press ignores the other 40,000 car crashes that happen in the United States each year. Musk spies on Tesla drivers (hello, classic Bond villain everyone) so he can see the dip in autopilot usage every time such a news story breaks. He’s got good reason to be concerned about this.

He argues that autopilot is safer than humans driving, and he’s got the statistics and government studies to back this up. Therefore, the press’s fixation on Tesla crashes is illegitimate “fake news”, titillating the audience with distorted truth.

But here’s the thing: that’s still only Musk’s version of the truth. Yes, on a mile-per-mile basis, autopilot is safer, but there’s nuance here. Autopilot is used primarily on freeways, which already have a low mile-per-mile accident rate. People choose autopilot only when conditions are incredibly safe and drivers are unlikely to have an accident anyway. Musk is therefore being intentionally deceptive comparing apples to oranges. Autopilot may still be safer, it’s just that the numbers Musk uses don’t demonstrate this.

And then there is the truth calling it “autopilot” to begin with, because it isn’t. The public is overrating the capabilities of the feature. It’s little different than “lane keeping” and “adaptive cruise control” you can now find in other cars. In many ways, the technology is behind — my Tesla doesn’t beep at me when a pedestrian walks behind my car while backing up, but virtually every new car on the market does.

Yes, the press unduly covers Tesla autopilot crashes, but Musk has only himself to blame by unduly exaggerating his car’s capabilities by calling it “autopilot”.

What’s “core truth” is thus rather difficult to obtain. What the press satisfies itself with instead is smaller truths, what they can document. The facts are in such cases that the accident happened, and they try to get Tesla or Musk to comment on it.

What you can criticize a journalist for is therefore not “core truth” but whether they did journalism correctly. When such stories criticize “autopilot”, but don’t do their diligence in getting Tesla’s side of the story, then that’s a violation of journalistic practice. When I criticize journalists for their poor handling of stories in my industry, I try to focus on which journalistic principles they get wrong. For example, the NYTimes reporters do a lot of stories quoting anonymous government sources in clear violation of journalistic principles.

If “credibility” is the concern, then it’s the classic Bond villain here that’s the problem: Musk himself. His track record on business statements is abysmal. For example, when he announced the Model 3 he claimed production targets that every Wall Street analyst claimed were absurd. He didn’t make those targets, he didn’t come close. Model 3 production is still lagging behind Musk’s twice adjusted targets.

https://www.bloomberg.com/graphics/2018-tesla-tracker/

So who has a credibility gap here, the press, or Musk himself?

Not only is Musk’s credibility problem ironic, so is the name he chose, “Pravada”, the Russian word for truth that was the name of the Soviet Union Communist Party’s official newspaper. This is so absurd this has to be a joke, yet Musk claims to be serious about all this.

Yes, the press has a lot of problems, and if Musk were some journalism professor concerned about journalists meeting the objective standards of their industry (e.g. abusing anonymous sources), then this would be a fine thing. But it’s not. It’s Musk who is upset the press’s version of “core truth” does not agree with his version — a version that he’s proven time and time again differs from “real truth”.

Just in case Musk is serious, I’ve already registered “www.antipravda.com” to start measuring the credibility of statements by billionaire playboy CEOs. Let’s see who blinks first.


I stole the title, with permission, from this tweet:

[$] What’s coming in OpenLDAP 2.5

Post Syndicated from corbet original https://lwn.net/Articles/755207/rss

If pressed, I will admit to thinking that, if
NIS
was good enough for Charles Babbage, it’s
good enough for me. I am therefore not a huge fan of
LDAP
; I feel I can detect in it the heavy hand of the ITU,
which seems to
wish to apply X.500 to
everything. Nevertheless, for secure, distributed, multi-platform identity
management it’s quite hard to beat. If you decide to run an LDAP server
on Unix, one of the major free implementations is slapd, the core
engine of the OpenLDAP project.
Howard Chu is the chief architect of the project,
and spoke at FLOSS 2018 about the upcoming 2.5 release. Any rumors
that he might have passed the time while the room filled up by giving
a short but nicely rendered fiddle recital are completely true.

C is to low level

Post Syndicated from Robert Graham original https://blog.erratasec.com/2018/05/c-is-too-low-level.html

I’m in danger of contradicting myself, after previously pointing out that x86 machine code is a high-level language, but this article claiming C is a not a low level language is bunk. C certainly has some problems, but it’s still the closest language to assembly. This is obvious by the fact it’s still the fastest compiled language. What we see is a typical academic out of touch with the real world.

The author makes the (wrong) observation that we’ve been stuck emulating the PDP-11 for the past 40 years. C was written for the PDP-11, and since then CPUs have been designed to make C run faster. The author imagines a different world, such as where CPU designers instead target something like LISP as their preferred language, or Erlang. This misunderstands the state of the market. CPUs do indeed supports lots of different abstractions, and C has evolved to accommodate this.


The author criticizes things like “out-of-order” execution which has lead to the Spectre sidechannel vulnerabilities. Out-of-order execution is necessary to make C run faster. The author claims instead that those resources should be spent on having more slower CPUs, with more threads. This sacrifices single-threaded performance in exchange for a lot more threads executing in parallel. The author cites Sparc Tx CPUs as his ideal processor.

But here’s the thing, the Sparc Tx was a failure. To be fair, it’s mostly a failure because most of the time, people wanted to run old C code instead of new Erlang code. But it was still a failure at running Erlang.

Time after time, engineers keep finding that “out-of-order”, single-threaded performance is still the winner. A good example is ARM processors for both mobile phones and servers. All the theory points to in-order CPUs as being better, but all the products are out-of-order, because this theory is wrong. The custom ARM cores from Apple and Qualcomm used in most high-end phones are so deeply out-of-order they give Intel CPUs competition. The same is true on the server front with the latest Qualcomm Centriq and Cavium ThunderX2 processors, deeply out of order supporting more than 100 instructions in flight.

The Cavium is especially telling. Its ThunderX CPU had 48 simple cores which was replaced with the ThunderX2 having 32 complex, deeply out-of-order cores. The performance increase was massive, even on multithread-friendly workloads. Every competitor to Intel’s dominance in the server space has learned the lesson from Sparc Tx: many wimpy cores is a failure, you need fewer beefy cores. Yes, they don’t need to be as beefy as Intel’s processors, but they need to be close.

Even Intel’s “Xeon Phi” custom chip learned this lesson. This is their GPU-like chip, running 60 cores with 512-bit wide “vector” (sic) instructions, designed for supercomputer applications. Its first version was purely in-order. Its current version is slightly out-of-order. It supports four threads and focuses on basic number crunching, so in-order cores seems to be the right approach, but Intel found in this case that out-of-order processing still provided a benefit. Practice is different than theory.

As an academic, the author of the above article focuses on abstractions. The criticism of C is that it has the wrong abstractions which are hard to optimize, and that if we instead expressed things in the right abstractions, it would be easier to optimize.

This is an intellectually compelling argument, but so far bunk.

The reason is that while the theoretical base language has issues, everyone programs using extensions to the language, like “intrinsics” (C ‘functions’ that map to assembly instructions). Programmers write libraries using these intrinsics, which then the rest of the normal programmers use. In other words, if your criticism is that C is not itself low level enough, it still provides the best access to low level capabilities.

Given that C can access new functionality in CPUs, CPU designers add new paradigms, from SIMD to transaction processing. In other words, while in the 1980s CPUs were designed to optimize C (stacks, scaled pointers), these days CPUs are designed to optimize tasks regardless of language.

The author of that article criticizes the memory/cache hierarchy, claiming it has problems. Yes, it has problems, but only compared to how well it normally works. The author praises the many simple cores/threads idea as hiding memory latency with little caching, but misses the point that caches also dramatically increase memory bandwidth. Intel processors are optimized to read a whopping 256 bits every clock cycle from L1 cache. Main memory bandwidth is orders of magnitude slower.

The author goes onto criticize cache coherency as a problem. C uses it, but other languages like Erlang don’t need it. But that’s largely due to the problems each languages solves. Erlang solves the problem where a large number of threads work on largely independent tasks, needing to send only small messages to each other across threads. The problems C solves is when you need many threads working on a huge, common set of data.

For example, consider the “intrusion prevention system”. Any thread can process any incoming packet that corresponds to any region of memory. There’s no practical way of solving this problem without a huge coherent cache. It doesn’t matter which language or abstractions you use, it’s the fundamental constraint of the problem being solved. RDMA is an important concept that’s moved from supercomputer applications to the data center, such as with memcached. Again, we have the problem of huge quantities (terabytes worth) shared among threads rather than small quantities (kilobytes).

The fundamental issue the author of the the paper is ignoring is decreasing marginal returns. Moore’s Law has gifted us more transistors than we can usefully use. We can’t apply those additional registers to just one thing, because the useful returns we get diminish.

For example, Intel CPUs have two hardware threads per core. That’s because there are good returns by adding a single additional thread. However, the usefulness of adding a third or fourth thread decreases. That’s why many CPUs have only two threads, or sometimes four threads, but no CPU has 16 threads per core.

You can apply the same discussion to any aspect of the CPU, from register count, to SIMD width, to cache size, to out-of-order depth, and so on. Rather than focusing on one of these things and increasing it to the extreme, CPU designers make each a bit larger every process tick that adds more transistors to the chip.

The same applies to cores. It’s why the “more simpler cores” strategy fails, because more cores have their own decreasing marginal returns. Instead of adding cores tied to limited memory bandwidth, it’s better to add more cache. Such cache already increases the size of the cores, so at some point it’s more effective to add a few out-of-order features to each core rather than more cores. And so on.

The question isn’t whether we can change this paradigm and radically redesign CPUs to match some academic’s view of the perfect abstraction. Instead, the goal is to find new uses for those additional transistors. For example, “message passing” is a useful abstraction in languages like Go and Erlang that’s often more useful than sharing memory. It’s implemented with shared memory and atomic instructions, but I can’t help but think it couldn’t better be done with direct hardware support.

Of course, as soon as they do that, it’ll become an intrinsic in C, then added to languages like Go and Erlang.

Summary

Academics live in an ideal world of abstractions, the rest of us live in practical reality. The reality is that vast majority of programmers work with the C family of languages (JavaScript, Go, etc.), whereas academics love the epiphanies they learned using other languages, especially function languages. CPUs are only superficially designed to run C and “PDP-11 compatibility”. Instead, they keep adding features to support other abstractions, abstractions available to C. They are driven by decreasing marginal returns — they would love to add new abstractions to the hardware because it’s a cheap way to make use of additional transitions. Academics are wrong believing that the entire system needs to be redesigned from scratch. Instead, they just need to come up with new abstractions CPU designers can add.

Join us at the Education Summit at PyCon UK 2018

Post Syndicated from Ben Nuttall original https://www.raspberrypi.org/blog/pycon-uk-2018/

PyCon UK 2018 will take place on Saturday 15 September to Wednesday 19 September in the splendid Cardiff City Hall, just a few miles from the Sony Technology Centre where the vast majority of Raspberry Pis is made. We’re pleased to announce that we’re curating this year’s Education Summit at the conference, where we’ll offer opportunities for young people to learn programming skills, and for educators to undertake professional development!

PyCon UK Education Summit logo

PyCon UK 2018 is your chance to be welcomed into the wonderful Python community. At the Education Summit, we’ll put on a young coders’ day on the Saturday, and an educators’ day on the Sunday.

Saturday — young coders’ day

On Saturday we’ll be running a CoderDojo full of workshops on Raspberry Pi and micro:bits for young people aged 7 to 17. If they wish, participants will get to make a project and present it to the conference on the main stage, and everyone will be given a free micro:bit to take home!

Kids’ tickets at just £6 will be available here soon.

Kids on a stage at PyCon UK

Kids presenting their projects to the conference

Sunday — educators’ day

PyCon UK has been bringing developers and educators together ever since it first started its education track in 2011. This year’s Sunday will be a day of professional development: we’ll give teachers, educators, parents, and coding club leaders the chance to learn from us and from each other to build their programming, computing, and digital making skills.

Educator workshop at PyCon UK

Professional development for educators

Educators get a special entrance rate for the conference, starting at £48 — get your tickets now. Financial assistance is also available.

Call for proposals

We invite you to send in your proposal for a talk and workshop at the Education Summit! We’re looking for:

  • 25-minute talks for the educators’ day
  • 50-minute workshops for either the young coders’ or the educators’ day

If you have something you’d like to share, such as a professional development session for educators, advice on best practice for teaching programming, a workshop for up-skilling in Python, or a fun physical computing activity for the CoderDojo, then we’d love to hear about it! Please submit your proposal by 15 June.




After the Education Summit, the conference will continue for two days of talks and a final day of development sprints. Feel free to submit your education-related talk to the main conference too if you want to share it with a wider audience! Check out the PyCon UK 2018 website for more information.

We’re looking forward to seeing you in September!

The post Join us at the Education Summit at PyCon UK 2018 appeared first on Raspberry Pi.

The Benefits of Side Projects

Post Syndicated from Bozho original https://techblog.bozho.net/the-benefits-of-side-projects/

Side projects are the things you do at home, after work, for your own “entertainment”, or to satisfy your desire to learn new stuff, in case your workplace doesn’t give you that opportunity (or at least not enough of it). Side projects are also a way to build stuff that you think is valuable but not necessarily “commercialisable”. Many side projects are open-sourced sooner or later and some of them contribute to the pool of tools at other people’s disposal.

I’ve outlined one recommendation about side projects before – do them with technologies that are new to you, so that you learn important things that will keep you better positioned in the software world.

But there are more benefits than that – serendipitous benefits, for example. And I’d like to tell some personal stories about that. I’ll focus on a few examples from my list of side projects to show how, through a sort-of butterfly effect, they helped shape my career.

The computoser project, no matter how cool algorithmic music composition, didn’t manage to have much of a long term impact. But it did teach me something apart from niche musical theory – how to read a bulk of scientific papers (mostly computer science) and understand them without being formally trained in the particular field. We’ll see how that was useful later.

Then there was the “State alerts” project – a website that scraped content from public institutions in my country (legislation, legislation proposals, decisions by regulators, new tenders, etc.), made them searchable, and “subscribable” – so that you get notified when a keyword of interest is mentioned in newly proposed legislation, for example. (I obviously subscribed for “information technologies” and “electronic”).

And that project turned out to have a significant impact on the following years. First, I chose a new technology to write it with – Scala. Which turned out to be of great use when I started working at TomTom, and on the 3rd day I was transferred to a Scala project, which was way cooler and much more complex than the original one I was hired for. It was a bit ironic, as my colleagues had just read that “I don’t like Scala” a few weeks earlier, but nevertheless, that was one of the most interesting projects I’ve worked on, and it went on for two years. Had I not known Scala, I’d probably be gone from TomTom much earlier (as the other project was restructured a few times), and I would not have learned many of the scalability, architecture and AWS lessons that I did learn there.

But the very same project had an even more important follow-up. Because if its “civic hacking” flavour, I was invited to join an informal group of developers (later officiated as an NGO) who create tools that are useful for society (something like MySociety.org). That group gathered regularly, discussed both tools and policies, and at some point we put up a list of policy priorities that we wanted to lobby policy makers. One of them was open source for the government, the other one was open data. As a result of our interaction with an interim government, we donated the official open data portal of my country, functioning to this day.

As a result of that, a few months later we got a proposal from the deputy prime minister’s office to “elect” one of the group for an advisor to the cabinet. And we decided that could be me. So I went for it and became advisor to the deputy prime minister. The job has nothing to do with anything one could imagine, and it was challenging and fascinating. We managed to pass legislation, including one that requires open source for custom projects, eID and open data. And all of that would not have been possible without my little side project.

As for my latest side project, LogSentinel – it became my current startup company. And not without help from the previous two mentioned above – the computer science paper reading was of great use when I was navigating the crypto papers landscape, and from the government job I not only gained invaluable legal knowledge, but I also “got” a co-founder.

Some other side projects died without much fanfare, and that’s fine. But the ones above shaped my “story” in a way that would not have been possible otherwise.

And I agree that such serendipitous chain of events could have happened without side projects – I could’ve gotten these opportunities by meeting someone at a bar (unlikely, but who knows). But we, as software engineers, are capable of tilting chance towards us by utilizing our skills. Side projects are our “extracurricular activities”, and they often lead to unpredictable, but rather positive chains of events. They would rarely be the only factor, but they are certainly great at unlocking potential.

The post The Benefits of Side Projects appeared first on Bozho's tech blog.

The Practical Effects of GDPR at Backblaze

Post Syndicated from Andy Klein original https://www.backblaze.com/blog/the-practical-effects-of-gdpr-at-backblaze/


GDPR day, May 25, 2018, is nearly here. On that day, will your inbox explode with update notices, opt-in agreements, and offers from lawyers searching for GDPR violators? Perhaps all the companies on earth that are not GDPR ready will just dissolve into dust. More likely, there will be some changes, but business as usual will continue and we’ll all be more aware of data privacy. Let’s go with the last one.

What’s Different With GDPR at Backblaze

The biggest difference you’ll notice is a completely updated Privacy Policy. Last week we sent out a service email announcing the new Privacy Policy. Some people asked what was different. Basically everything. About 95% of the agreement was rewritten. In the agreement, we added in the appropriate provisions required by GDPR, and hopefully did a better job specifying the data we collect from you, why we collect it, and what we are going to do with it.

As a reminder, at Backblaze your data falls into two catagories. The first type of data is the data you store with us — stored data. These are the files and objects you upload and store, and as needed, restore. We do not share this data. We do not process this data, except as requested by you to store and restore the data. We do not analyze this data looking for keywords, tags, images, etc. No one outside of Backblaze has access to this data unless you explicitly shared the data by providing that person access to one or more files.

The second type of data is your account data. Some of your account data is considered personal data. This is the information we collect from you to provide our Personal Backup, Business Backup and B2 Cloud Storage services. Examples include your email address to provide access to your account, or the name of your computer so we can organize your files like they are arranged on your computer to make restoration easier. We have written a number of Help Articles covering the different ways this information is collected and processed. In addition, these help articles outline the various “rights” granted via GDPR. We will continue to add help articles over the coming weeks to assist in making it easy to work with us to understand and exercise your rights.

What’s New With GDPR at Backblaze

The most obvious addition is the Data Processing Addendum (DPA). This covers how we protect the data you store with us, i.e. stored data. As noted above, we don’t do anything with your data, except store it and keep it safe until you need it. Now we have a separate document saying that.

It is important to note the new Data Processing Addendum is now incorporated by reference into our Terms of Service, which everyone agrees to when they sign up for any of our services. Now all of our customers have a shiny new Data Processing Agreement to go along with the updated Privacy Policy. We promise they are not long or complicated, and we encourage you to read them. If you have any questions, stop by our GDPR help section on our website.

Patience, Please

Every company we have dealt with over the last few months is working hard to comply with GDPR. It has been a tough road whether you tried to do it yourself or like Backblaze, hired an EU-based law firm for advice. Over the coming weeks and months as you reach out to discover and assert your rights, please have a little patience. We are all going through a steep learning curve as GDPR gets put into practice. Along the way there are certain to be some growing pains — give us a chance, we all want to get it right.

Regardless, at Backblaze we’ve been diligently protecting our customers’ data for over 11 years and nothing that will happen on May 25th will change that.

The post The Practical Effects of GDPR at Backblaze appeared first on Backblaze Blog | Cloud Storage & Cloud Backup.

AWS GDPR Data Processing Addendum – Now Part of Service Terms

Post Syndicated from Chad Woolf original https://aws.amazon.com/blogs/security/aws-gdpr-data-processing-addendum/

Today, we’re happy to announce that the AWS GDPR Data Processing Addendum (GDPR DPA) is now part of our online Service Terms. This means all AWS customers globally can rely on the terms of the AWS GDPR DPA which will apply automatically from May 25, 2018, whenever they use AWS services to process personal data under the GDPR. The AWS GDPR DPA also includes EU Model Clauses, which were approved by the European Union (EU) data protection authorities, known as the Article 29 Working Party. This means that AWS customers wishing to transfer personal data from the European Economic Area (EEA) to other countries can do so with the knowledge that their personal data on AWS will be given the same high level of protection it receives in the EEA.

As we approach the GDPR enforcement date this week, this announcement is an important GDPR compliance component for us, our customers, and our partners. All customers which that are using cloud services to process personal data will need to have a data processing agreement in place between them and their cloud services provider if they are to comply with GDPR. As early as April 2017, AWS announced that AWS had a GDPR-ready DPA available for its customers. In this way, we started offering our GDPR DPA to customers over a year before the May 25, 2018 enforcement date. Now, with the DPA terms included in our online service terms, there is no extra engagement needed by our customers and partners to be compliant with the GDPR requirement for data processing terms.

The AWS GDPR DPA also provides our customers with a number of other important assurances, such as the following:

  • AWS will process customer data only in accordance with customer instructions.
  • AWS has implemented and will maintain robust technical and organizational measures for the AWS network.
  • AWS will notify its customers of a security incident without undue delay after becoming aware of the security incident.
  • AWS will make available certificates issued in relation to the ISO 27001 certification, the ISO 27017 certification, and the ISO 27018 certification to further help customers and partners in their own GDPR compliance activities.

Customers who have already signed an offline version of the AWS GDPR DPA can continue to rely on that GDPR DPA. By incorporating our GDPR DPA into the AWS Service Terms, we are simply extending the terms of our GDPR DPA to all customers globally who will require it under GDPR.

AWS GDPR DPA is only part of the story, however. We are continuing to work alongside our customers and partners to help them on their journey towards GDPR compliance.

If you have any questions about the GDPR or the AWS GDPR DPA, please contact your account representative, or visit the AWS GDPR Center at: https://aws.amazon.com/compliance/gdpr-center/

-Chad

Interested in AWS Security news? Follow the AWS Security Blog on Twitter.

Raspberry Jam Cameroon #PiParty

Post Syndicated from Ben Nuttall original https://www.raspberrypi.org/blog/raspberry-jam-cameroon-piparty/

Earlier this year on 3 and 4 March, communities around the world held Raspberry Jam events to celebrate Raspberry Pi’s sixth birthday. We sent out special birthday kits to participating Jams — it was amazing to know the kits would end up in the hands of people in parts of the world very far from Raspberry Pi HQ in Cambridge, UK.

The Raspberry Jam Camer team: Damien Doumer, Eyong Etta, Loïc Dessap and Lionel Sichom, aka Lionel Tellem

Preparing for the #PiParty

One birthday kit went to Yaoundé, the capital of Cameroon. There, a team of four students in their twenties — Lionel Sichom (aka Lionel Tellem), Eyong Etta, Loïc Dessap, and Damien Doumer — were organising Yaoundé’s first Jam, called Raspberry Jam Camer, as part of the Raspberry Jam Big Birthday Weekend. The team knew one another through their shared interests and skills in electronics, robotics, and programming. Damien explains in his blog post about the Jam that they planned ahead for several activities for the Jam based on their own projects, so they could be confident of having a few things that would definitely be successful for attendees to do and see.

Show-and-tell at Raspberry Jam Cameroon

Loïc presented a Raspberry Pi–based, Android app–controlled robot arm that he had built, and Lionel coded a small video game using Scratch on Raspberry Pi while the audience watched. Damien demonstrated the possibilities of Windows 10 IoT Core on Raspberry Pi, showing how to install it, how to use it remotely, and what you can do with it, including building a simple application.

Loïc Dessap, wearing a Raspberry Jam Big Birthday Weekend T-shirt, sits at a table with a robot arm, a laptop with a Pi sticker and other components. He is making an adjustment to his set-up.

Loïc showcases the prototype robot arm he built

There was lots more too, with others discussing their own Pi projects and talking about the possibilities Raspberry Pi offers, including a Pi-controlled drone and car. Cake was a prevailing theme of the Raspberry Jam Big Birthday Weekend around the world, and Raspberry Jam Camer made sure they didn’t miss out.

A round pink-iced cake decorated with the words "Happy Birthday RBP" and six candles, on a table beside Raspberry Pi stickers, Raspberry Jam stickers and Raspberry Jam fliers

Yay, birthday cake!!

A big success

Most visitors to the Jam were secondary school students, while others were university students and graduates. The majority were unfamiliar with Raspberry Pi, but all wanted to learn about Raspberry Pi and what they could do with it. Damien comments that the fact most people were new to Raspberry Pi made the event more interactive rather than creating any challenges, because the visitors were all interested in finding out about the little computer. The Jam was an all-round success, and the team was pleased with how it went:

What I liked the most was that we sensitized several people about the Raspberry Pi and what one can be capable of with such a small but powerful device. — Damien Doumer

The Jam team rounded off the event by announcing that this was the start of a Raspberry Pi community in Yaoundé. They hope that they and others will be able to organise more Jams and similar events in the area to spread the word about what people can do with Raspberry Pi, and to help them realise their ideas.

The Raspberry Jam Camer team, wearing Raspberry Jam Big Birthday Weekend T-shirts, pose with young Jam attendees outside their venue

Raspberry Jam Camer gets the thumbs-up

The Raspberry Pi community in Cameroon

In a French-language interview about their Jam, the team behind Raspberry Jam Camer said they’d like programming to become the third official language of Cameroon, after French and English; their aim is to to popularise programming and digital making across Cameroonian society. Neither of these fields is very familiar to most people in Cameroon, but both are very well aligned with the country’s ambitions for development. The team is conscious of the difficulties around the emergence of information and communication technologies in the Cameroonian context; in response, they are seizing the opportunities Raspberry Pi offers to give children and young people access to modern and constantly evolving technology at low cost.

Thanks to Lionel, Eyong, Damien, and Loïc, and to everyone who helped put on a Jam for the Big Birthday Weekend! Remember, anyone can start a Jam at any time — and we provide plenty of resources to get you started. Check out the Guidebook, the Jam branding pack, our specially-made Jam activities online (in multiple languages), printable worksheets, and more.

The post Raspberry Jam Cameroon #PiParty appeared first on Raspberry Pi.

All Systems Go! 2018 CfP Open

Post Syndicated from Lennart Poettering original http://0pointer.net/blog/all-systems-go-2018-cfp-open.html

The All Systems Go! 2018 Call for Participation is Now Open!

The Call for Participation (CFP) for All Systems Go!
2018
is now open. We’d like to invite you
to submit your proposals for consideration to the CFP submission
site
.

ASG image

The CFP will close on July 30th. Notification of acceptance and
non-acceptance will go out within 7 days of the closing of the CFP.

All topics relevant to foundational open-source Linux technologies are
welcome. In particular, however, we are looking for proposals
including, but not limited to, the following topics:

  • Low-level container executors and infrastructure
  • IoT and embedded OS infrastructure
  • BPF and eBPF filtering
  • OS, container, IoT image delivery and updating
  • Building Linux devices and applications
  • Low-level desktop technologies
  • Networking
  • System and service management
  • Tracing and performance measuring
  • IPC and RPC systems
  • Security and Sandboxing

While our focus is definitely more on the user-space side of things,
talks about kernel projects are welcome, as long as they have a clear
and direct relevance for user-space.

For more information please visit our conference
website
!

CloudFrunt – Identify Misconfigured CloudFront Domains

Post Syndicated from Darknet original https://www.darknet.org.uk/2018/05/cloudfrunt-identify-misconfigured-cloudfront-domains/?utm_source=rss&utm_medium=social&utm_campaign=darknetfeed

CloudFrunt – Identify Misconfigured CloudFront Domains

CloudFrunt is a Python-based tool for identifying misconfigured CloudFront domains, it uses DNS and looks for CNAMEs which may be allowed to be associated with CloudFront distributions. This effectively allows for domain hijacking.

How CloudFrunt Works For Misconfigured CloudFront

CloudFront is a Content Delivery Network (CDN) provided by Amazon Web Services (AWS). CloudFront users create “distributions” that serve content from specific sources (an S3 bucket, for example).

Each CloudFront distribution has a unique endpoint for users to point their DNS records to (ex.

Read the rest of CloudFrunt – Identify Misconfigured CloudFront Domains now! Only available at Darknet.

Connect, collaborate, and learn at AWS Global Summits in 2018

Post Syndicated from Tina Kelleher original https://aws.amazon.com/blogs/big-data/connect-collaborate-and-learn-at-aws-global-summits-in-2018/

Regardless of your career path, there’s no denying that attending industry events can provide helpful career development opportunities — not only for improving and expanding your skill sets, but for networking as well. According to this article from PayScale.com, experts estimate that somewhere between 70-85% of new positions are landed through networking.

Narrowing our focus to networking opportunities with cloud computing professionals who’re working on tackling some of today’s most innovative and exciting big data solutions, attending big data-focused sessions at an AWS Global Summit is a great place to start.

AWS Global Summits are free events that bring the cloud computing community together to connect, collaborate, and learn about AWS. As the name suggests, these summits are held in major cities around the world, and attract technologists from all industries and skill levels who’re interested in hearing from AWS leaders, experts, partners, and customers.

In addition to networking opportunities with top cloud technology providers, consultants and your peers in our Partner and Solutions Expo, you’ll also hone your AWS skills by attending and participating in a multitude of education and training opportunities.

Here’s a brief sampling of some of the upcoming sessions relevant to big data professionals:

May 31st : Big Data Architectural Patterns and Best Practices on AWS | AWS Summit – Mexico City

June 6th-7th: Various (click on the “Big Data & Analytics” header) | AWS Summit – Berlin

June 20-21st : [email protected] | Public Sector Summit – Washington DC

June 21st: Enabling Self Service for Data Scientists with AWS Service Catalog | AWS Summit – Sao Paulo

Be sure to check out the main page for AWS Global Summits, where you can see which cities have AWS Summits planned for 2018, register to attend an upcoming event, or provide your information to be notified when registration opens for a future event.