Tag Archives: mitm attack

Security Vulnerabilities in Certificate Pinning

Post Syndicated from Bruce Schneier original https://www.schneier.com/blog/archives/2017/12/security_vulner_10.html

New research found that many banks offer certificate pinning as a security feature, but fail to authenticate the hostname. This leaves the systems open to man-in-the-middle attacks.

From the paper:

Abstract: Certificate verification is a crucial stage in the establishment of a TLS connection. A common security flaw in TLS implementations is the lack of certificate hostname verification but, in general, this is easy to detect. In security-sensitive applications, the usage of certificate pinning is on the rise. This paper shows that certificate pinning can (and often does) hide the lack of proper hostname verification, enabling MITM attacks. Dynamic (black-box) detection of this vulnerability would typically require the tester to own a high security certificate from the same issuer (and often same intermediate CA) as the one used by the app. We present Spinner, a new tool for black-box testing for this vulnerability at scale that does not require purchasing any certificates. By redirecting traffic to websites which use the relevant certificates and then analysing the (encrypted) network traffic we are able to determine whether the hostname check is correctly done, even in the presence of certificate pinning. We use Spinner to analyse 400 security-sensitive Android and iPhone apps. We found that 9 apps had this flaw, including two of the largest banks in the world: Bank of America and HSBC. We also found that TunnelBear, one of the most popular VPN apps was also vulnerable. These apps have a joint user base of tens of millions of users.

News article.

A Man-in-the-Middle Attack against a Password Reset System

Post Syndicated from Bruce Schneier original https://www.schneier.com/blog/archives/2017/07/a_man-in-the-mi.html

This is nice work: “The Password Reset MitM Attack,” by Nethanel Gelerntor, Senia Kalma, Bar Magnezi, and Hen Porcilan:

Abstract: We present the password reset MitM (PRMitM) attack and show how it can be used to take over user accounts. The PRMitM attack exploits the similarity of the registration and password reset processes to launch a man in the middle (MitM) attack at the application level. The attacker initiates a password reset process with a website and forwards every challenge to the victim who either wishes to register in the attacking site or to access a particular resource on it.

The attack has several variants, including exploitation of a password reset process that relies on the victim’s mobile phone, using either SMS or phone call. We evaluated the PRMitM attacks on Google and Facebook users in several experiments, and found that their password reset process is vulnerable to the PRMitM attack. Other websites and some popular mobile applications are vulnerable as well.

Although solutions seem trivial in some cases, our experiments show that the straightforward solutions are not as effective as expected. We designed and evaluated two secure password reset processes and evaluated them on users of Google and Facebook. Our results indicate a significant improvement in the security. Since millions of accounts are currently vulnerable to the PRMitM attack, we also present a list of recommendations for implementing and auditing the password reset process.

Password resets have long been a weak security link.

BoingBoing Post.

The command-line, for cybersec

Post Syndicated from Robert Graham original http://blog.erratasec.com/2017/01/the-command-line-for-cybersec.html

On Twitter I made the mistake of asking people about command-line basics for cybersec professionals. A got a lot of useful responses, which I summarize in this long (5k words) post. It’s mostly driven by the tools I use, with a bit of input from the tweets I got in response to my query.

bash

By command-line this document really means bash.

There are many types of command-line shells. Windows has two, ‘cmd.exe’ and ‘PowerShell’. Unix started with the Bourne shell ‘sh’, and there have been many variations of this over the years, ‘csh’, ‘ksh’, ‘zsh’, ‘tcsh’, etc. When GNU rewrote Unix user-mode software independently, they called their shell “Bourne Again Shell” or “bash” (queue “JSON Bourne” shell jokes here).

Bash is the default shell for Linux and macOS. It’s also available on Windows, as part of their special “Windows Subsystem for Linux”. The windows version of ‘bash’ has become my most used shell.

For Linux IoT devices, BusyBox is the most popular shell. It’s easy to clear, as it includes feature-reduced versions of popular commands.

man

‘Man’ is the command you should not run if you want help for a command.

Man pages are designed to drive away newbies. They are only useful if you already mostly an expert with the command you desire help on. Man pages list all possible features of a program, but do not highlight examples of the most common features, or the most common way to use the commands.

Take ‘sed’ as an example. It’s used most commonly to do a search-and-replace in files, like so:

$ sed ‘s/rob/dave/’ foo.txt

This usage is so common that many non-geeks know of it. Yet, if you type ‘man sed’ to figure out how to do a search and replace, you’ll get nearly incomprehensible gibberish, and no example of this most common usage.

I point this out because most guides on using the shell recommend ‘man’ pages to get help. This is wrong, it’ll just endlessly frustrate you. Instead, google the commands you need help on, or better yet, search StackExchange for answers.

You might try asking questions, like on Twitter or forum sites, but this requires a strategy. If you ask a basic question, self-important dickholes will respond by telling you to “rtfm” or “read the fucking manual”. A better strategy is to exploit their dickhole nature, such as saying “too bad command xxx cannot do yyy”. Helpful people will gladly explain why you are wrong, carefully explaining how xxx does yyy.

If you must use ‘man’, use the ‘apropos’ command to find the right man page. Sometimes multiple things in the system have the same or similar names, leading you to the wrong page.

apt-get install yum

Using the command-line means accessing that huge open-source ecosystem. Most of the things in this guide do no already exist on the system. You have to either compile them from source, or install via a package-manager. Linux distros ship with a small footprint, but have a massive database of precompiled software “packages” in the cloud somewhere. Use the “package manager” to install the software from the cloud.

On Debian-derived systems (like Ubuntu, Kali, Raspbian), type “apt-get install masscan” to install “masscan” (as an example). Use “apt-cache search scan” to find a bunch of scanners you might want to install.

On RedHat systems, use “yum” instead. On BSD, use the “ports” system, which you can also get working for macOS.

If no pre-compiled package exists for a program, then you’ll have to download the source code and compile it. There’s about an 80% chance this will work easy, following the instructions. There is a 20% chance you’ll experience “dependency hell”, for example, needing to install two mutually incompatible versions of Python.

Bash is a scripting language

Don’t forget that shells are really scripting languages. The bit that executes a single command is just a degenerate use of the scripting language. For example, you can do a traditional for loop like:

$ for i in $(seq 1 9); do echo $i; done

In this way, ‘bash’ is no different than any other scripting language, like Perl, Python, NodeJS, PHP CLI, etc. That’s why a lot of stuff on the system actually exists as short ‘bash’ programs, aka. shell scripts.

Few want to write bash scripts, but you are expected to be able to read them, either to tweek existing scripts on the system, or to read StackExchange help.

File system commands

The macOS “Finder” or Windows “File Explorer” are just graphical shells that help you find files, open, and save them. The first commands you learn are for the same functionality on the command-line: pwd, cd, ls, touch, rm, rmdir, mkdir, chmod, chown, find, ln, mount.

The command “rm –rf /” removes everything starting from the root directory. This will also follow mounted server directories, deleting files on the server. I point this out to give an appreciation of the raw power you have over the system from the command-line, and how easy you can disrupt things.

Of particular interest is the “mount” command. Desktop versions of Linux typically mount USB flash drives automatically, but on servers, you need to do it manually, e.g.:

$ mkdir ~/foobar
$ mount /dev/sdb ~/foobar

You’ll also use the ‘mount’ command to connect to file servers, using the “cifs” package if they are Windows file servers:

# apt-get install cifs-utils
# mkdir /mnt/vids
# mount -t cifs -o username=robert,password=foobar123  //192.168.1.11/videos /mnt/vids

Linux system commands

The next commands you’ll learn are about syadmin the Linux system: ps, top, who, history, last, df, du, kill, killall, lsof, lsmod, uname, id, shutdown, and so on.

The first thing hackers do when hacking into a system is run “uname” (to figure out what version of the OS is running) and “id” (to figure out which account they’ve acquired, like “root” or some other user).

The Linux system command I use most is “dmesg” (or ‘tail –f /var/log/dmesg’) which shows you the raw system messages. For example, when I plug in USB drives to a server, I look in ‘dmesg’ to find out which device was added so that I can mount it. I don’t know if this is the best way, it’s just the way I do it (servers don’t automount USB drives like desktops do).

Networking commands

The permanent state of the network (what gets configured on the next bootup) is configured in text files somewhere. But there are a wealth of commands you’ll use to view the current state of networking, make temporary changes, and diagnose problems.

The ‘ifconfig’ command has long been used to view the current TCP/IP configuration and make temporary changes. Learning how TCP/IP works means playing a lot with ‘ifconfig’. Use “ifconfig –a” for even more verbose information.

Use the “route” command to see if you are sending packets to the right router.

Use ‘arp’ command to make sure you can reach the local router.

Use ‘traceroute’ to make sure packets are following the correct route to their destination. You should learn the nifty trick it’s based on (TTLs). You should also play with the TCP, UDP, and ICMP options.

Use ‘ping’ to see if you can reach the target across the Internet. Usefully measures the latency in milliseconds, and congestion (via packet loss). For example, ping NetFlix throughout the day, and notice how the ping latency increases substantially during “prime time” viewing hours.

Use ‘dig’ to make sure DNS resolution is working right. (Some use ‘nslookup’ instead). Dig is useful because it’s the raw universal DNS tool – every time they add some new standard feature to DNS, they add that feature into ‘dig’ as well.

The ‘netstat –tualn’ command views the current TCP/IP connections and which ports are listening. I forget what the various options “tualn” mean, only it’s the output I always want to see, rather than the raw “netstat” command by itself.

You’ll want to use ‘ethtool –k’ to turn off checksum and segmentation offloading. These are features that break packet-captures sometimes.

There is this new fangled ‘ip’ system for Linux networking, replacing many of the above commands, but as an old timer, I haven’t looked into that.

Some other tools for diagnosing local network issues are ‘tcpdump’, ‘nmap’, and ‘netcat’. These are described in more detail below.

ssh

In general, you’ll remotely log into a system in order to use the command-line. We use ‘ssh’ for that. It uses a protocol similar to SSL in order to encrypt the connection. There are two ways to use ‘ssh’ to login, with a password or with a client-side certificate.

When using SSH with a password, you type “ssh [email protected]”. The remote system will then prompt you for a password for that account.

When using client-side certificates, use “ssh-keygen” to generate a key, then either copy the public-key of the client to the server manually, or use “ssh-copy-id” to copy it using the password method above.

How this works is basic application of public-key cryptography. When logging in with a password, you get a copy of the server’s public-key the first time you login, and if it ever changes, you get a nasty warning that somebody may be attempting a man in the middle attack.

$ ssh [email protected]
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@    WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!     @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!

When using client-side certificates, the server trusts your public-key. This is similar to how client-side certificates work in SSL VPNs.

You can use SSH for things other than loging into a remote shell. You can script ‘ssh’ to run commands remotely on a system in a local shell script. You can use ‘scp’ (SSH copy) to transfer files to and from a remote system. You can do tricks with SSH to create tunnels, which is popular way to bypass the restrictive rules of your local firewall nazi.

openssl

This is your general cryptography toolkit, doing everything from simple encryption, to public-key certificate signing, to establishing SSL connections.

It is extraordinarily user hostile, with terrible inconsistency among options. You can only figure out how to do things by looking up examples on the net, such as on StackExchange. There are competing SSL libraries with their own command-line tools, like GnuTLS and Mozilla NSS that you might find easier to use.

The fundamental use of the ‘openssl’ tool is to create public-keys, “certificate requests”, and creating self-signed certificates. All the web-site certificates I’ve ever obtained has been using the openssl command-line tool to create CSRs.

You should practice using the ‘openssl’ tool to encrypt files, sign files, and to check signatures.

You can use openssl just like PGP for encrypted emails/messages, but following the “S/MIME” standard rather than PGP standard. You might consider learning the ‘pgp’ command-line tools, or the open-source ‘gpg’ or ‘gpg2’ tools as well.

You should learn how to use the “openssl s_client” feature to establish SSL connections, as well as the “openssl s_server” feature to create an SSL proxy for a server that doesn’t otherwise support SSL.

Learning all the ways of using the ‘openssl’ tool to do useful things will go a long way in teaching somebody about crypto and cybersecurity. I can imagine an entire class consisting of nothing but learning ‘openssl’.

netcat (nc, socat, cyptocat, ncat)

A lot of Internet protocols are based on text. That means you can create a raw TCP connection to the service and interact with them using your keyboard. The classic tool for doing this is known as “netcat”, abbreviated “nc”. For example, connect to Google’s web server at port and type the HTTP HEAD command followed by a blank line (hit [return] twice):

$ nc www.google.com 80
HEAD / HTTP/1.0

HTTP/1.0 200 OK
Date: Tue, 17 Jan 2017 01:53:28 GMT
Expires: -1
Cache-Control: private, max-age=0
Content-Type: text/html; charset=ISO-8859-1
P3P: CP=”This is not a P3P policy! See https://www.google.com/support/accounts/answer/151657?hl=en for more info.”
Server: gws
X-XSS-Protection: 1; mode=block
X-Frame-Options: SAMEORIGIN
Set-Cookie: NID=95=o7GT1uJCWTPhaPAefs4CcqF7h7Yd7HEqPdAJncZfWfDSnNfliWuSj3XfS5GJXGt67-QJ9nc8xFsydZKufBHLj-K242C3_Vak9Uz1TmtZwT-1zVVBhP8limZI55uXHuPrejAxyTxSCgR6MQ; expires=Wed, 19-Jul-2017 01:53:28 GMT; path=/; domain=.google.com; HttpOnly
Accept-Ranges: none
Vary: Accept-Encoding

Another classic example is to connect to port 25 on a mail server to send email, spoofing the “MAIL FROM” address.

There are several versions of ‘netcat’ that work over SSL as well. My favorite is ‘ncat’, which comes with ‘nmap’, as it’s actively maintained. In theory, “openssl s_client” should also work this way.

nmap

At some point, you’ll need to port scan. The standard program for this is ‘nmap’, and it’s the best. The classic way of using it is something like:

# nmap –A scanme.nmap.org

The ‘-A’ option means to enable all the interesting features like OS detection, version detection, and basic scripts on the most common ports that a server might have open. It takes awhile to run. The “scanme.nmap.org” is a good site to practice on.

Nmap is more than just a port scanner. It has a rich scripting system for probing more deeply into a system than just a port, and to gather more information useful for attacks. The scripting system essentially contains some attacks, such as password guessing.

Scanning the Internet, finding services identified by ‘nmap’ scripts, and interacting with them with tools like ‘ncat’ will teach you a lot about how the Internet works.

BTW, if ‘nmap’ is too slow, using ‘masscan’ instead. It’s a lot faster, though has much more limited functionality.

Packet sniffing with tcpdump and tshark

All Internet traffic consists of packets going between IP addresses. You can capture those packets and view them using “packet sniffers”. The most important packet-sniffer is “Wireshark”, a GUI. For the command-line, there is ‘tcpdump’ and ‘tshark’.

You can run tcpdump on the command-line to watch packets go in/out of the local computer. This performs a quick “decode” of packets as they are captured. It’ll reverse-lookup IP addresses into DNS names, which means its buffers can overflow, dropping new packets while it’s waiting for DNS name responses for previous packets (which can be disabled with -n):

# tcpdump –p –i eth0

A common task is to create a round-robin set of files, saving the last 100 files of 1-gig each. Older files are overwritten. Thus, when an attack happens, you can stop capture, and go backward in times and view the contents of the network traffic using something like Wireshark:

# tcpdump –p -i eth0 -s65535 –C 1000 –W 100 –w cap

Instead of capturing everything, you’ll often set “BPF” filters to narrow down to traffic from a specific target, or a specific port.

The above examples use the –p option to capture traffic destined to the local computer. Sometimes you may want to look at all traffic going to other machines on the local network. You’ll need to figure out how to tap into wires, or setup “monitor” ports on switches for this to work.

A more advanced command-line program is ‘tshark’. It can apply much more complex filters. It can also be used to extract the values of specific fields and dump them to a text files.

Base64/hexdump/xxd/od

These are some rather trivial commands, but you should know them.

The ‘base64’ command encodes binary data in text. The text can then be passed around, such as in email messages. Base64 encoding is often automatic in the output from programs like openssl and PGP.

In many cases, you’ll need to view a hex dump of some binary data. There are many programs to do this, such as hexdump, xxd, od, and more.

grep

Grep searches for a pattern within a file. More important, it searches for a regular expression (regex) in a file. The fu of Unix is that a lot of stuff is stored in text files, and use grep for regex patterns in order to extra stuff stored in those files.

The power of this tool really depends on your mastery of regexes. You should master enough that you can understand StackExhange posts that explain almost what you want to do, and then tweek them to make them work.

Grep, by default, shows only the matching lines. In many cases, you only want the part that matches. To do that, use the –o option. (This is not available on all versions of grep).

You’ll probably want the better, “extended” regular expressions, so use the –E option.

You’ll often want “case-insensitive” options (matching both upper and lower case), so use the –i option.

For example, to extract all MAC address from a text file, you might do something like the following. This extracts all strings that are twelve hex digits.

$ grep –Eio ‘[0-9A-F]{12}’ foo.txt

Text processing

Grep is just the first of the various “text processing filters”. Other useful ones include ‘sed’, ‘cut’, ‘sort’, and ‘uniq’.

You’ll be an expert as piping output of one to the input of the next. You’ll use “sort | uniq” as god (Dennis Ritchie) intended and not the heresy of “sort –u”.

You might want to master ‘awk’. It’s a new programming language, but once you master it, it’ll be easier than other mechanisms.

You’ll end up using ‘wc’ (word-count) a lot. All it does is count the number of lines, words, characters in a file, but you’ll find yourself wanting to do this a lot.

csvkit and jq

You get data in CSV format and JSON format a lot. The tools ‘csvkit’ and ‘jq’ respectively help you deal with those tools, to convert these files into other formats, sticking the data in databases, and so forth.

It’ll be easier using these tools that understand these text formats to extract data than trying to write ‘awk’ command or ‘grep’ regexes.

strings

Most files are binary with a few readable ASCII strings. You use the program ‘strings’ to extract those strings.

This one simple trick sounds stupid, but it’s more powerful than you’d think. For example, I knew that a program probably contained a hard-coded password. I then blindly grabbed all the strings in the program’s binary file and sent them to a password cracker to see if they could decrypt something. And indeed, one of the 100,000 strings in the file worked, thus finding the hard-coded password.

tail -f

So ‘tail’ is just a standard Linux tool for looking at the end of files. If you want to keep checking the end of a live file that’s constantly growing, then use “tail –f”. It’ll sit there waiting for something new to be added to the end of the file, then print it out. I do this a lot, so I thought it’d be worth mentioning.

tar –xvfz, gzip, xz, 7z

In prehistorical times (like the 1980s), Unix was backed up to tape drives. The tar command could be used to combine a bunch of files into a single “archive” to be sent to the tape drive, hence “tape archive” or “tar”.

These days, a lot of stuff you download will be in tar format (ending in .tar). You’ll need to learn how to extract it:

$ tar –xvf something.tar

Nobody knows what the “xvf” options mean anymore, but these letters most be specified in that order. I’m joking here, but only a little: somebody did a survey once and found that virtually nobody know how to use ‘tar’ other than the canned formulas such as this.

Along with combining files into an archive you also need to compress them. In prehistoric Unix, the “compress” command would be used, which would replace a file with a compressed version ending in ‘.z’. This would found to be encumbered with patents, so everyone switched to ‘gzip’ instead, which replaces a file with a new one ending with ‘.gz’.

$ ls foo.txt*
foo.txt
$ gzip foo.txt
$ ls foo.txt*
foo.txt.gz

Combined with tar, you get files with either the “.tar.gz” extension, or simply “.tgz”. You can untar and uncompress at the same time:

$ tar –xvfz something .tar.gz

Gzip is always good enough, but nerds gonna nerd and want to compress with slightly better compression programs. They’ll have extensions like “.bz2”, “.7z”, “.xz”, and so on. There are a ton of them. Some of them are supported directly by the ‘tar’ program:

$ tar –xvfj something.tar.bz2

Then there is the “zip/unzip” program, which supports Windows .zip file format. To create compressed archives these days, I don’t bother with tar, but just use the ZIP format. For example, this will recursively descend a directory, adding all files to a ZIP file that can easily be extracted under Windows:

$ zip –r test.zip ./test/

dd

I should include this under the system tools at the top, but it’s interesting for a number of purposes. The usage is simply to copy one file to another, the in-file to the out-file.

$ dd if=foo.txt of=foo2.txt

But that’s not interesting. What interesting is using it to write to “devices”. The disk drives in your system also exist as raw devices under the /dev directory.

For example, if you want to create a boot USB drive for your Raspberry Pi:

# dd if=rpi-ubuntu.img of=/dev/sdb

Or, you might want to hard erase an entire hard drive by overwriting random data:

# dd if=/dev/urandom of=/dev/sdc

Or, you might want to image a drive on the system, for later forensics, without stumbling on things like open files.

# dd if=/dev/sda of=/media/Lexar/infected.img

The ‘dd’ program has some additional options, like block size and so forth, that you’ll want to pay attention to.

screen and tmux

You log in remotely and start some long running tool. Unfortunately, if you log out, all the processes you started will be killed. If you want it to keep running, then you need a tool to do this.

I use ‘screen’. Before I start a long running port scan, I run the “screen” command. Then, I type [ctrl-a][ctrl-d] to disconnect from that screen, leaving it running in the background.

Then later, I type “screen –r” to reconnect to it. If there are more than one screen sessions, using ‘-r’ by itself will list them all. Use “-r pid” to reattach to the proper one. If you can’t, then use “-D pid” or “-D –RR pid” to forced the other session to detached from whoever is using it.

Tmux is an alternative to screen that many use. It’s cool for also having lots of terminal screens open at once.

curl and wget

Sometimes you want to download files from websites without opening a browser. The ‘curl’ and ‘wget’ programs do that easily. Wget is the traditional way of doing this, but curl is a bit more flexible. I use curl for everything these days, except mirroring a website, in which case I just do “wget –m website”.

The thing that makes ‘curl’ so powerful is that it’s really designed as a tool for poking and prodding all the various features of HTTP. That it’s also useful for downloading files is a happy coincidence. When playing with a target website, curl will allow you do lots of complex things, which you can then script via bash. For example, hackers often write their cross-site scripting/forgeries in bash scripts using curl.

node/php/python/perl/ruby/lua

As mentioned above, bash is its own programming language. But it’s weird, and annoying. So sometimes you want a real programming language. Here are some useful ones.

Yes, PHP is a language that runs in a web server for creating web pages. But if you know the language well, it’s also a fine command-line language for doing stuff.

Yes, JavaScript is a language that runs in the web browser. But if you know it well, it’s also a great language for doing stuff, especially with the “nodejs” version.

Then there are other good command line languages, like the Python, Ruby, Lua, and the venerable Perl.

What makes all these great is the large library support. Somebody has already written a library that nearly does what you want that can be made to work with a little bit of extra code of your own.

My general impression is that Python and NodeJS have the largest libraries likely to have what you want, but you should pick whichever language you like best, whichever makes you most productive. For me, that’s NodeJS, because of the great Visual Code IDE/debugger.

iptables, iptables-save

I shouldn’t include this in the list. Iptables isn’t a command-line tool as such. The tool is the built-in firewalling/NAT features within the Linux kernel. Iptables is just the command to configure it.

Firewalling is an important part of cybersecurity. Everyone should have some experience playing with a Linux system doing basic firewalling tasks: basic rules, NATting, and transparent proxying for mitm attacks.

Use ‘iptables-save’ in order to persistently save your changes.

MySQL

Similar to ‘iptables’, ‘mysql’ isn’t a tool in its own right, but a way of accessing a database maintained by another process on the system.

Filters acting on text files only goes so far. Sometimes you need to dump it into a database, and make queries on that database.

There is also the offensive skill needed to learn how targets store things in a database, and how attackers get the data.

Hackers often publish raw SQL data they’ve stolen in their hacks (like the Ashley-Madisan dump). Being able to stick those dumps into your own database is quite useful. Hint: disable transaction logging while importing mass data.

If you don’t like SQL, you might consider NoSQL tools like Elasticsearch, MongoDB, and Redis that can similarly be useful for arranging and searching data. You’ll probably have to learn some JSON tools for formatting the data.

Reverse engineering tools

A cybersecurity specialty is “reverse engineering”. Some want to reverse engineer the target software being hacked, to understand vulnerabilities. This is needed for commercial software and device firmware where the source code is hidden. Others use these tools to analyze viruses/malware.

The ‘file’ command uses heuristics to discover the type of a file.

There’s a whole skillset for analyzing PDF and Microsoft Office documents. I play with pdf-parser. There’s a long list at this website:
https://zeltser.com/analyzing-malicious-documents/

There’s a whole skillset for analyzing executables. Binwalk is especially useful for analyzing firmware images.

Qemu is useful is a useful virtual-machine. It can emulate full systems, such as an IoT device based on the MIPS processor. Like some other tools mentioned here, it’s more a full subsystem than a simple command-line tool.

On a live system, you can use ‘strace’ to view what system calls a process is making. Use ‘lsof’ to view which files and network connections a process is making.

Password crackers

A common cybersecurity specialty is “password cracking”. There’s two kinds: online and offline password crackers.

Typical online password crackers are ‘hydra’ and ‘medusa’. They can take files containing common passwords and attempt to log on to various protocols remotely, like HTTP, SMB, FTP, Telnet, and so on. I used ‘hydra’ recently in order to find the default/backdoor passwords to many IoT devices I’ve bought recently in my test lab.

Online password crackers must open TCP connections to the target, and try to logon. This limits their speed. They also may be stymied by systems that lock accounts, or introduce delays, after too many bad password attempts.

Typical offline password crackers are ‘hashcat’ and ‘jtr’ (John the Ripper). They work off of stolen encrypted passwords. They can attempt billions of passwords-per-second, because there’s no network interaction, nothing slowing them down.

Understanding offline password crackers means getting an appreciation for the exponential difficulty of the problem. A sufficiently long and complex encrypted password is uncrackable. Instead of brute-force attempts at all possible combinations, we must use tricks, like mutating the top million most common passwords.

I use hashcat because of the great GPU support, but John is also a great program.

WiFi hacking

A common specialty in cybersecurity is WiFi hacking. The difficulty in WiFi hacking is getting the right WiFi hardware that supports the features (monitor mode, packet injection), then the right drivers installed in your operating system. That’s why I use Kali rather than some generic Linux distribution, because it’s got the right drivers installed.

The ‘aircrack-ng’ suite is the best for doing basic hacking, such as packet injection. When the parents are letting the iPad babysit their kid with a loud movie at the otherwise quite coffeeshop, use ‘aircrack-ng’ to deauth the kid.

The ‘reaver’ tool is useful for hacking into sites that leave WPS wide open and misconfigured.

Remote exploitation

A common specialty in cybersecurity is pentesting.

Nmap, curl, and netcat (described above) above are useful tools for this.

Some useful DNS tools are ‘dig’ (described above), dnsrecon/dnsenum/fierce that try to enumerate and guess as many names as possible within a domain. These tools all have unique features, but also have a lot of overlap.

Nikto is a basic tool for probing for common vulnerabilities, out-of-date software, and so on. It’s not really a vulnerability scanner like Nessus used by defenders, but more of a tool for attack.

SQLmap is a popular tool for probing for SQL injection weaknesses.

Then there is ‘msfconsole’. It has some attack features. This is humor – it has all the attack features. Metasploit is the most popular tool for running remote attacks against targets, exploiting vulnerabilities.

Text editor

Finally, there is the decision of text editor. I use ‘vi’ variants. Others like ‘nano’ and variants. There’s no wrong answer as to which editor to use, unless that answer is ‘emacs’.

Conclusion

Obviously, not every cybersecurity professional will be familiar with every tool in this list. If you don’t do reverse-engineering, then you won’t use reverse-engineering tools.

On the other hand, regardless of your specialty, you need to know basic crypto concepts, so you should know something like the ‘openssl’ tool. You need to know basic networking, so things like ‘nmap’ and ‘tcpdump’. You need to be comfortable processing large dumps of data, manipulating it with any tool available. You shouldn’t be frightened by a little sysadmin work.

The above list is therefore a useful starting point for cybersecurity professionals. Of course, those new to the industry won’t have much familiarity with them. But it’s fair to say that I’ve used everything listed above at least once in the last year, and the year before that, and the year before that. I spend a lot of time on StackExchange and Google searching the exact options I need, so I’m not an expert, but I am familiar with the basic use of all these things.

Fluxion – Automated EvilAP Attack Tool

Post Syndicated from Darknet original http://feedproxy.google.com/~r/darknethackers/~3/9T4e6Vl_EoI/

Fluxion is an automated EvilAP attack tool for carrying out MiTM attacks on WPA Wireless networks written in a mix of Bash and Python. Fluxion is heavily based off Linset the Evil Twin Attack Bash Script, with some improvements and bug-fixes. How it Works Scan the networks. Capture a handshake (can’t be used without a […]

The post Fluxion…

Read the full post at darknet.org.uk

Ettercap – A Suite For Man-In-The-Middle Attacks

Post Syndicated from Darknet original http://feedproxy.google.com/~r/darknethackers/~3/Y51Scv7c-Tg/

Ettercap is a comprehensive suite for man-in-the-middle attacks (MiTM). It features sniffing of live connections, content filtering on the fly and many other interesting tricks. It also supports active and passive dissection of many protocols and includes many features for network and host analysis. Ettercap works by putting the network interface…

Read the full post at darknet.org.uk

I’ve bought some more awful IoT stuff

Post Syndicated from Matthew Garrett original https://mjg59.dreamwidth.org/43486.html

I bought some awful WiFi lightbulbs a few months ago. The short version: they introduced terrible vulnerabilities on your network, they violated the GPL and they were also just bad at being lightbulbs. Since then I’ve bought some other Internet of Things devices, and since people seem to have a bizarre level of fascination with figuring out just what kind of fractal of poor design choices these things frequently embody, I thought I’d oblige.

Today we’re going to be talking about the KanKun SP3, a plug that’s been around for a while. The idea here is pretty simple – there’s lots of devices that you’d like to be able to turn on and off in a programmatic way, and rather than rewiring them the simplest thing to do is just to insert a control device in between the wall and the device andn ow you can turn your foot bath on and off from your phone. Most vendors go further and also allow you to program timers and even provide some sort of remote tunneling protocol so you can turn off your lights from the comfort of somebody else’s home.

The KanKun has all of these features and a bunch more, although when I say “features” I kind of mean the opposite. I plugged mine in and followed the install instructions. As is pretty typical, this took the form of the plug bringing up its own Wifi access point, the app on the phone connecting to it and sending configuration data, and the plug then using that data to join your network. Except it didn’t work. I connected to the plug’s network, gave it my SSID and password and waited. Nothing happened. No useful diagnostic data. Eventually I plugged my phone into my laptop and ran adb logcat, and the Android debug logs told me that the app was trying to modify a network that it hadn’t created. Apparently this isn’t permitted as of Android 6, but the app was handling this denial by just trying again. I deleted the network from the system settings, restarted the app, and this time the app created the network record and could modify it. It still didn’t work, but that’s because it let me give it a 5GHz network and it only has a 2.4GHz radio, so one reset later and I finally had it online.

The first thing I normally do to one of these things is run nmap with the -O argument, which gives you an indication of what OS it’s running. I didn’t really need to in this case, because if I just telnetted to port 22 I got a dropbear ssh banner. Googling turned up the root password (“p9z34c”) and I was logged into a lightly hacked (and fairly obsolete) OpenWRT environment.

It turns out that here’s a whole community of people playing with these plugs, and it’s common for people to install CGI scripts on them so they can turn them on and off via an API. At first this sounds somewhat confusing, because if the phone app can control the plug then there clearly is some kind of API, right? Well ha yeah ok that’s a great question and oh good lord do things start getting bad quickly at this point.

I’d grabbed the apk for the app and a copy of jadx, an incredibly useful piece of code that’s surprisingly good at turning compiled Android apps into something resembling Java source. I dug through that for a while before figuring out that before packets were being sent, they were being handed off to some sort of encryption code. I couldn’t find that in the app, but there was a native ARM library shipped with it. Running strings on that showed functions with names matching the calls in the Java code, so that made sense. There were also references to AES, which explained why when I ran tcpdump I only saw bizarre garbage packets.

But what was surprising was that most of these packets were substantially similar. There were a load that were identical other than a 16-byte chunk in the middle. That plus the fact that every payload length was a multiple of 16 bytes strongly indicated that AES was being used in ECB mode. In ECB mode each plaintext is split up into 16-byte chunks and encrypted with the same key. The same plaintext will always result in the same encrypted output. This implied that the packets were substantially similar and that the encryption key was static.

Some more digging showed that someone had figured out the encryption key last year, and that someone else had written some tools to control the plug without needing to modify it. The protocol is basically ascii and consists mostly of the MAC address of the target device, a password and a command. This is then encrypted and sent to the device’s IP address. The device then sends a challenge packet containing a random number. The app has to decrypt this, obtain the random number, create a response, encrypt that and send it before the command takes effect. This avoids the most obvious weakness around using ECB – since the same plaintext always encrypts to the same ciphertext, you could just watch encrypted packets go past and replay them to get the same effect, even if you didn’t have the encryption key. Using a random number in a challenge forces you to prove that you actually have the key.

At least, it would do if the numbers were actually random. It turns out that the plug is just calling rand(). Further, it turns out that it never calls srand(). This means that the plug will always generate the same sequence of challenges after a reboot, which means you can still carry out replay attacks if you can reboot the plug. Strong work.

But there was still the question of how the remote control works, since the code on github only worked locally. tcpdumping the traffic from the server and trying to decrypt it in the same way as local packets worked fine, and showed that the only difference was that the packet started “wan” rather than “lan”. The server decrypts the packet, looks at the MAC address, re-encrypts it and sends it over the tunnel to the plug that registered with that address.

That’s not really a great deal of authentication. The protocol permits a password, but the app doesn’t insist on it – some quick playing suggests that about 90% of these devices still use the default password. And the devices are all based on the same wifi module, so the MAC addresses are all in the same range. The process of sending status check packets to the server with every MAC address wouldn’t take that long and would tell you how many of these devices are out there. If they’re using the default password, that’s enough to have full control over them.

There’s some other failings. The github repo mentioned earlier includes a script that allows arbitrary command execution – the wifi configuration information is passed to the system() command, so leaving a semicolon in the middle of it will result in your own commands being executed. Thankfully this doesn’t seem to be true of the daemon that’s listening for the remote control packets, which seems to restrict its use of system() to data entirely under its control. But even if you change the default root password, anyone on your local network can get root on the plug. So that’s a thing. It also downloads firmware updates over http and doesn’t appear to check signatures on them, so there’s the potential for MITM attacks on the plug itself. The remote control server is on AWS unless your timezone is GMT+8, in which case it’s in China. Sorry, Western Australia.

It’s running Linux and includes Busybox and dnsmasq, so plenty of GPLed code. I emailed the manufacturer asking for a copy and got told that they wouldn’t give it to me, which is unsurprising but still disappointing.

The use of AES is still somewhat confusing, given the relatively small amount of security it provides. One thing I’ve wondered is whether it’s not actually intended to provide security at all. The remote servers need to accept connections from anywhere and funnel decent amounts of traffic around from phones to switches. If that weren’t restricted in any way, competitors would be able to use existing servers rather than setting up their own. Using AES at least provides a minor obstacle that might encourage them to set up their own server.

Overall: the hardware seems fine, the software is shoddy and the security is terrible. If you have one of these, set a strong password. There’s no rate-limiting on the server, so a weak password will be broken pretty quickly. It’s also infringing my copyright, so I’d recommend against it on that point alone.

comment count unavailable comments