Making an Orbic Speed RC400L autoboot when USB power is attached

Post Syndicated from original https://mjg59.dreamwidth.org/62419.html

As I mentioned a couple of weeks ago, I’ve been trying to hack an Orbic Speed RC400L mobile hotspot so it’ll automatically boot when power is attached. When plugged in it would flash a “Welcome” screen and then switch to a display showing the battery charging – it wouldn’t show up on USB, and didn’t turn on any networking. So, my initial assumption was that the bootloader was making a policy decision not to boot Linux. After getting root (as described in the previous post), I was able to cat /proc/mtd and see that partition 7 was titled “aboot”. Aboot is a commonly used Android bootloader, based on Little Kernel – LK provides the hardware interface, aboot is simply an app that runs on top of it. I was able to find the source code for Quectel’s aboot, which is intended to run on the same SoC that’s in this hotspot, so it was relatively easy to line up a bunch of the Ghidra decompilation with actual source (top tip: find interesting strings in your decompilation and paste them into github search, and see whether you get a repo back).

Trending
In the Works – AWS Region in Melbourne, Australia

Unfortunately looking through this showed various cases where bootloader policy decisions were made, but all of them seemed to result in Linux booting. Patching them and flashing the patched loader back to the hotspot didn’t change the behaviour. So now I was confused: it seemed like Linux was loading, but there wasn’t an obvious point in the boot scripts where it then decided not to do stuff. No boot logs were retained between boots, which made things even more annoying. But then I realised that, well, I have root – I can just do my own logging. I hacked in an additional init script to dump dmesg to /var, powered it down, and then plugged in a USB cable. It booted to the charging screen. I hit the power button and it booted fully, appearing on USB. I adb shelled in, checked the logs, and saw that it had booted twice. So, we were definitely entering Linux before showing the charging screen. But what was the difference?

Diffing the dmesg showed that there was a major distinction on the kernel command line. The kernel command line is data populated by the bootloader and then passed to the kernel – it’s how you provide arguments that alter kernel behaviour without having to recompile it, but it’s also exposed to userland by the running kernel so it also serves as a way for the bootloader to pass information to the running userland. The boot that resulted in the charging screen had a androidboot.poweronreason=USB argument, the one that booted fully had androidboot.poweronreason=PWRKEY. Searching the filesystem for androidboot.poweronreason showed that the script that configures USB did not enable USB if poweronreason was USB, and the same string also showed up in a bunch of other applications. The bootloader was always booting Linux, but it was telling Linux why it had booted, and if that reason was “USB” then Linux was choosing not to enable USB and not starting the networking stack.

One approach would be to modify every application that parsed this data and make it work even if the power on reason was “USB”. That would have been tedious. It seemed easier to modify the bootloader. Looking for that string in Ghidra showed that it was reading a register from the power management controller and then interpreting that to determine the reason it had booted. In effect, it was doing something like:

boot_reason = read_pmic_boot_reason();
switch(boot_reason) {
case 0x10:
  bootparam = strdup("androidboot.poweronreason=PWRKEY");
  break;
case 0x20:
  bootparam = strdup("androidboot.poweronreason=USB");
  break;
default:
  bootparam = strdup("androidboot.poweronreason=Hard_Reset");
}

Changing the 0x20 to 0xff meant that the USB case would never be detected, and it would fall through to the default. All the userland code was happy to accept “Hard_Reset” as a legitimate reason to boot, and now plugging in USB results in the modem booting to a functional state. Woo.

If you want to do this yourself, dump the aboot partition from your device, and search for the hex sequence “03 02 00 0a 20″”. Change the final 0x20 to 0xff, copy it back to the device, and write it to mtdblock7. If it doesn’t work, feel free to curse me, but I’m almost certainly going to be no use to you whatsoever. Also, please, do not just attempt to mechanically apply this to other hotspots. It’s not going to end well.

comment count unavailable comments