Tag Archives: APIs

Protecting your API using Amazon API Gateway and AWS WAF — Part I

Post Syndicated from Chris Munns original https://aws.amazon.com/blogs/compute/protecting-your-api-using-amazon-api-gateway-and-aws-waf-part-i/

This post courtesy of Thiago Morais, AWS Solutions Architect

When you build web applications or expose any data externally, you probably look for a platform where you can build highly scalable, secure, and robust REST APIs. As APIs are publicly exposed, there are a number of best practices for providing a secure mechanism to consumers using your API.

Amazon API Gateway handles all the tasks involved in accepting and processing up to hundreds of thousands of concurrent API calls, including traffic management, authorization and access control, monitoring, and API version management.

In this post, I show you how to take advantage of the regional API endpoint feature in API Gateway, so that you can create your own Amazon CloudFront distribution and secure your API using AWS WAF.

AWS WAF is a web application firewall that helps protect your web applications from common web exploits that could affect application availability, compromise security, or consume excessive resources.

As you make your APIs publicly available, you are exposed to attackers trying to exploit your services in several ways. The AWS security team published a whitepaper solution using AWS WAF, How to Mitigate OWASP’s Top 10 Web Application Vulnerabilities.

Regional API endpoints

Edge-optimized APIs are endpoints that are accessed through a CloudFront distribution created and managed by API Gateway. Before the launch of regional API endpoints, this was the default option when creating APIs using API Gateway. It primarily helped to reduce latency for API consumers that were located in different geographical locations than your API.

When API requests predominantly originate from an Amazon EC2 instance or other services within the same AWS Region as the API is deployed, a regional API endpoint typically lowers the latency of connections. It is recommended for such scenarios.

For better control around caching strategies, customers can use their own CloudFront distribution for regional APIs. They also have the ability to use AWS WAF protection, as I describe in this post.

Edge-optimized API endpoint

The following diagram is an illustrated example of the edge-optimized API endpoint where your API clients access your API through a CloudFront distribution created and managed by API Gateway.

Regional API endpoint

For the regional API endpoint, your customers access your API from the same Region in which your REST API is deployed. This helps you to reduce request latency and particularly allows you to add your own content delivery network, as needed.

Walkthrough

In this section, you implement the following steps:

  • Create a regional API using the PetStore sample API.
  • Create a CloudFront distribution for the API.
  • Test the CloudFront distribution.
  • Set up AWS WAF and create a web ACL.
  • Attach the web ACL to the CloudFront distribution.
  • Test AWS WAF protection.

Create the regional API

For this walkthrough, use an existing PetStore API. All new APIs launch by default as the regional endpoint type. To change the endpoint type for your existing API, choose the cog icon on the top right corner:

After you have created the PetStore API on your account, deploy a stage called “prod” for the PetStore API.

On the API Gateway console, select the PetStore API and choose Actions, Deploy API.

For Stage name, type prod and add a stage description.

Choose Deploy and the new API stage is created.

Use the following AWS CLI command to update your API from edge-optimized to regional:

aws apigateway update-rest-api \
--rest-api-id {rest-api-id} \
--patch-operations op=replace,path=/endpointConfiguration/types/EDGE,value=REGIONAL

A successful response looks like the following:

{
    "description": "Your first API with Amazon API Gateway. This is a sample API that integrates via HTTP with your demo Pet Store endpoints", 
    "createdDate": 1511525626, 
    "endpointConfiguration": {
        "types": [
            "REGIONAL"
        ]
    }, 
    "id": "{api-id}", 
    "name": "PetStore"
}

After you change your API endpoint to regional, you can now assign your own CloudFront distribution to this API.

Create a CloudFront distribution

To make things easier, I have provided an AWS CloudFormation template to deploy a CloudFront distribution pointing to the API that you just created. Click the button to deploy the template in the us-east-1 Region.

For Stack name, enter RegionalAPI. For APIGWEndpoint, enter your API FQDN in the following format:

{api-id}.execute-api.us-east-1.amazonaws.com

After you fill out the parameters, choose Next to continue the stack deployment. It takes a couple of minutes to finish the deployment. After it finishes, the Output tab lists the following items:

  • A CloudFront domain URL
  • An S3 bucket for CloudFront access logs
Output from CloudFormation

Output from CloudFormation

Test the CloudFront distribution

To see if the CloudFront distribution was configured correctly, use a web browser and enter the URL from your distribution, with the following parameters:

https://{your-distribution-url}.cloudfront.net/{api-stage}/pets

You should get the following output:

[
  {
    "id": 1,
    "type": "dog",
    "price": 249.99
  },
  {
    "id": 2,
    "type": "cat",
    "price": 124.99
  },
  {
    "id": 3,
    "type": "fish",
    "price": 0.99
  }
]

Set up AWS WAF and create a web ACL

With the new CloudFront distribution in place, you can now start setting up AWS WAF to protect your API.

For this demo, you deploy the AWS WAF Security Automations solution, which provides fine-grained control over the requests attempting to access your API.

For more information about deployment, see Automated Deployment. If you prefer, you can launch the solution directly into your account using the following button.

For CloudFront Access Log Bucket Name, add the name of the bucket created during the deployment of the CloudFormation stack for your CloudFront distribution.

The solution allows you to adjust thresholds and also choose which automations to enable to protect your API. After you finish configuring these settings, choose Next.

To start the deployment process in your account, follow the creation wizard and choose Create. It takes a few minutes do finish the deployment. You can follow the creation process through the CloudFormation console.

After the deployment finishes, you can see the new web ACL deployed on the AWS WAF console, AWSWAFSecurityAutomations.

Attach the AWS WAF web ACL to the CloudFront distribution

With the solution deployed, you can now attach the AWS WAF web ACL to the CloudFront distribution that you created earlier.

To assign the newly created AWS WAF web ACL, go back to your CloudFront distribution. After you open your distribution for editing, choose General, Edit.

Select the new AWS WAF web ACL that you created earlier, AWSWAFSecurityAutomations.

Save the changes to your CloudFront distribution and wait for the deployment to finish.

Test AWS WAF protection

To validate the AWS WAF Web ACL setup, use Artillery to load test your API and see AWS WAF in action.

To install Artillery on your machine, run the following command:

$ npm install -g artillery

After the installation completes, you can check if Artillery installed successfully by running the following command:

$ artillery -V
$ 1.6.0-12

As the time of publication, Artillery is on version 1.6.0-12.

One of the WAF web ACL rules that you have set up is a rate-based rule. By default, it is set up to block any requesters that exceed 2000 requests under 5 minutes. Try this out.

First, use cURL to query your distribution and see the API output:

$ curl -s https://{distribution-name}.cloudfront.net/prod/pets
[
  {
    "id": 1,
    "type": "dog",
    "price": 249.99
  },
  {
    "id": 2,
    "type": "cat",
    "price": 124.99
  },
  {
    "id": 3,
    "type": "fish",
    "price": 0.99
  }
]

Based on the test above, the result looks good. But what if you max out the 2000 requests in under 5 minutes?

Run the following Artillery command:

artillery quick -n 2000 --count 10  https://{distribution-name}.cloudfront.net/prod/pets

What you are doing is firing 2000 requests to your API from 10 concurrent users. For brevity, I am not posting the Artillery output here.

After Artillery finishes its execution, try to run the cURL request again and see what happens:

 

$ curl -s https://{distribution-name}.cloudfront.net/prod/pets

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<HTML><HEAD><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<TITLE>ERROR: The request could not be satisfied</TITLE>
</HEAD><BODY>
<H1>ERROR</H1>
<H2>The request could not be satisfied.</H2>
<HR noshade size="1px">
Request blocked.
<BR clear="all">
<HR noshade size="1px">
<PRE>
Generated by cloudfront (CloudFront)
Request ID: [removed]
</PRE>
<ADDRESS>
</ADDRESS>
</BODY></HTML>

As you can see from the output above, the request was blocked by AWS WAF. Your IP address is removed from the blocked list after it falls below the request limit rate.

Conclusion

In this first part, you saw how to use the new API Gateway regional API endpoint together with Amazon CloudFront and AWS WAF to secure your API from a series of attacks.

In the second part, I will demonstrate some other techniques to protect your API using API keys and Amazon CloudFront custom headers.

EC2 Fleet – Manage Thousands of On-Demand and Spot Instances with One Request

Post Syndicated from Jeff Barr original https://aws.amazon.com/blogs/aws/ec2-fleet-manage-thousands-of-on-demand-and-spot-instances-with-one-request/

EC2 Spot Fleets are really cool. You can launch a fleet of Spot Instances that spans EC2 instance types and Availability Zones without having to write custom code to discover capacity or monitor prices. You can set the target capacity (the size of the fleet) in units that are meaningful to your application and have Spot Fleet create and then maintain the fleet on your behalf. Our customers are creating Spot Fleets of all sizes. For example, one financial service customer runs Monte Carlo simulations across 10 different EC2 instance types. They routinely make requests for hundreds of thousands of vCPUs and count on Spot Fleet to give them access to massive amounts of capacity at the best possible price.

EC2 Fleet
Today we are extending and generalizing the set-it-and-forget-it model that we pioneered in Spot Fleet with EC2 Fleet, a new building block that gives you the ability to create fleets that are composed of a combination of EC2 On-Demand, Reserved, and Spot Instances with a single API call. You tell us what you need, capacity and instance-wise, and we’ll handle all the heavy lifting. We will launch, manage, monitor and scale instances as needed, without the need for scaffolding code.

You can specify the capacity of your fleet in terms of instances, vCPUs, or application-oriented units, and also indicate how much of the capacity should be fulfilled by Spot Instances. The application-oriented units allow you to specify the relative power of each EC2 instance type in a way that directly maps to the needs of your application. All three capacity specification options (instances, vCPUs, and application-oriented units) are known as weights.

I think you’ll find a number ways this feature makes managing a fleet of instances easier, and believe that you will also appreciate the team’s near-term feature roadmap of interest (more on that in a bit).

Using EC2 Fleet
There are a number of ways that you can use this feature, whether you’re running a stateless web service, a big data cluster or a continuous integration pipeline. Today I’m going to describe how you can use EC2 Fleet for genomic processing, but this is similar to workloads like risk analysis, log processing or image rendering. Modern DNA sequencers can produce multiple terabytes of raw data each day, to process that data into meaningful information in a timely fashion you need lots of processing power. I’ll be showing you how to deploy a “grid” of worker nodes that can quickly crunch through secondary analysis tasks in parallel.

Projects in genomics can use the elasticity EC2 provides to experiment and try out new pipelines on hundreds or even thousands of servers. With EC2 you can access as many cores as you need and only pay for what you use. Prior to today, you would need to use the RunInstances API or an Auto Scaling group for the On-Demand & Reserved Instance portion of your grid. To get the best price performance you’d also create and manage a Spot Fleet or multiple Spot Auto Scaling groups with different instance types if you wanted to add Spot Instances to turbo-boost your secondary analysis. Finally, to automate scaling decisions across multiple APIs and Auto Scaling groups you would need to write Lambda functions that periodically assess your grid’s progress & backlog, as well as current Spot prices – modifying your Auto Scaling Groups and Spot Fleets accordingly.

You can now replace all of this with a single EC2 Fleet, analyzing genomes at scale for as little as $1 per analysis. In my grid, each step in in the pipeline requires 1 vCPU and 4 GiB of memory, a perfect match for M4 and M5 instances with 4 GiB of memory per vCPU. I will create a fleet using M4 and M5 instances with weights that correspond to the number of vCPUs on each instance:

  • m4.16xlarge – 64 vCPUs, weight = 64
  • m5.24xlarge – 96 vCPUs, weight = 96

This is expressed in a template that looks like this:

"Overrides": [
{
  "InstanceType": "m4.16xlarge",
  "WeightedCapacity": 64,
},
{
  "InstanceType": "m5.24xlarge",
  "WeightedCapacity": 96,
},
]

By default, EC2 Fleet will select the most cost effective combination of instance types and Availability Zones (both specified in the template) using the current prices for the Spot Instances and public prices for the On-Demand Instances (if you specify instances for which you have matching RIs, your discounts will apply). The default mode takes weights into account to get the instances that have the lowest price per unit. So for my grid, fleet will find the instance that offers the lowest price per vCPU.

Now I can request capacity in terms of vCPUs, knowing EC2 Fleet will select the lowest cost option using only the instance types I’ve defined as acceptable. Also, I can specify how many vCPUs I want to launch using On-Demand or Reserved Instance capacity and how many vCPUs should be launched using Spot Instance capacity:

"TargetCapacitySpecification": {
	"TotalTargetCapacity": 2880,
	"OnDemandTargetCapacity": 960,
	"SpotTargetCapacity": 1920,
	"DefaultTargetCapacityType": "Spot"
}

The above means that I want a total of 2880 vCPUs, with 960 vCPUs fulfilled using On-Demand and 1920 using Spot. The On-Demand price per vCPU is lower for m5.24xlarge than the On-Demand price per vCPU for m4.16xlarge, so EC2 Fleet will launch 10 m5.24xlarge instances to fulfill 960 vCPUs. Based on current Spot pricing (again, on a per-vCPU basis), EC2 Fleet will choose to launch 30 m4.16xlarge instances or 20 m5.24xlarges, delivering 1920 vCPUs either way.

Putting it all together, I have a single file (fl1.json) that describes my fleet:

    "LaunchTemplateConfigs": [
        {
            "LaunchTemplateSpecification": {
                "LaunchTemplateId": "lt-0e8c754449b27161c",
                "Version": "1"
            }
        "Overrides": [
        {
          "InstanceType": "m4.16xlarge",
          "WeightedCapacity": 64,
        },
        {
          "InstanceType": "m5.24xlarge",
          "WeightedCapacity": 96,
        },
      ]
        }
    ],
    "TargetCapacitySpecification": {
        "TotalTargetCapacity": 2880,
        "OnDemandTargetCapacity": 960,
        "SpotTargetCapacity": 1920,
        "DefaultTargetCapacityType": "Spot"
    }
}

I can launch my fleet with a single command:

$ aws ec2 create-fleet --cli-input-json file://home/ec2-user/fl1.json
{
    "FleetId":"fleet-838cf4e5-fded-4f68-acb5-8c47ee1b248a"
}

My entire fleet is created within seconds and was built using 10 m5.24xlarge On-Demand Instances and 30 m4.16xlarge Spot Instances, since the current Spot price was 1.5¢ per vCPU for m4.16xlarge and 1.6¢ per vCPU for m5.24xlarge.

Now lets imagine my grid has crunched through its backlog and no longer needs the additional Spot Instances. I can then modify the size of my fleet by changing the target capacity in my fleet specification, like this:

{         
    "TotalTargetCapacity": 960,
}

Since 960 was equal to the amount of On-Demand vCPUs I had requested, when I describe my fleet I will see all of my capacity being delivered using On-Demand capacity:

"TargetCapacitySpecification": {
	"TotalTargetCapacity": 960,
	"OnDemandTargetCapacity": 960,
	"SpotTargetCapacity": 0,
	"DefaultTargetCapacityType": "Spot"
}

When I no longer need my fleet I can delete it and terminate the instances in it like this:

$ aws ec2 delete-fleets --fleet-id fleet-838cf4e5-fded-4f68-acb5-8c47ee1b248a \
  --terminate-instances   
{
    "UnsuccessfulFleetDletetions": [],
    "SuccessfulFleetDeletions": [
        {
            "CurrentFleetState": "deleted_terminating",
            "PreviousFleetState": "active",
            "FleetId": "fleet-838cf4e5-fded-4f68-acb5-8c47ee1b248a"
        }
    ]
}

Earlier I described how RI discounts apply when EC2 Fleet launches instances for which you have matching RIs, so you might be wondering how else RI customers benefit from EC2 Fleet. Let’s say that I own regional RIs for M4 instances. In my EC2 Fleet I would remove m5.24xlarge and specify m4.10xlarge and m4.16xlarge. Then when EC2 Fleet creates the grid, it will quickly find M4 capacity across the sizes and AZs I’ve specified, and my RI discounts apply automatically to this usage.

In the Works
We plan to connect EC2 Fleet and EC2 Auto Scaling groups. This will let you create a single fleet that mixed instance types and Spot, Reserved and On-Demand, while also taking advantage of EC2 Auto Scaling features such as health checks and lifecycle hooks. This integration will also bring EC2 Fleet functionality to services such as Amazon ECS, Amazon EKS, and AWS Batch that build on and make use of EC2 Auto Scaling for fleet management.

Available Now
You can create and make use of EC2 Fleets today in all public AWS Regions!

Jeff;

New .BOT gTLD from Amazon

Post Syndicated from Randall Hunt original https://aws.amazon.com/blogs/aws/new-bot-gtld-from-amazon/

Today, I’m excited to announce the launch of .BOT, a new generic top-level domain (gTLD) from Amazon. Customers can use .BOT domains to provide an identity and portal for their bots. Fitness bots, slack bots, e-commerce bots, and more can all benefit from an easy-to-access .BOT domain. The phrase “bot” was the 4th most registered domain keyword within the .COM TLD in 2016 with more than 6000 domains per month. A .BOT domain allows customers to provide a definitive internet identity for their bots as well as enhancing SEO performance.

At the time of this writing .BOT domains start at $75 each and must be verified and published with a supported tool like: Amazon Lex, Botkit Studio, Dialogflow, Gupshup, Microsoft Bot Framework, or Pandorabots. You can expect support for more tools over time and if your favorite bot framework isn’t supported feel free to contact us here: [email protected].

Below, I’ll walk through the experience of registering and provisioning a domain for my bot, whereml.bot. Then we’ll look at setting up the domain as a hosted zone in Amazon Route 53. Let’s get started.

Registering a .BOT domain

First, I’ll head over to https://amazonregistry.com/bot, type in a new domain, and click magnifying class to make sure my domain is available and get taken to the registration wizard.

Next, I have the opportunity to choose how I want to verify my bot. I build all of my bots with Amazon Lex so I’ll select that in the drop down and get prompted for instructions specific to AWS. If I had my bot hosted somewhere else I would need to follow the unique verification instructions for that particular framework.

To verify my Lex bot I need to give the Amazon Registry permissions to invoke the bot and verify it’s existence. I’ll do this by creating an AWS Identity and Access Management (IAM) cross account role and providing the AmazonLexReadOnly permissions to that role. This is easily accomplished in the AWS Console. Be sure to provide the account number and external ID shown on the registration page.

Now I’ll add read only permissions to our Amazon Lex bots.

I’ll give my role a fancy name like DotBotCrossAccountVerifyRole and a description so it’s easy to remember why I made this then I’ll click create to create the role and be transported to the role summary page.

Finally, I’ll copy the ARN from the created role and save it for my next step.

Here I’ll add all the details of my Amazon Lex bot. If you haven’t made a bot yet you can follow the tutorial to build a basic bot. I can refer to any alias I’ve deployed but if I just want to grab the latest published bot I can pass in $LATEST as the alias. Finally I’ll click Validate and proceed to registering my domain.

Amazon Registry works with a partner EnCirca to register our domains so we’ll select them and optionally grab Site Builder. I know how to sling some HTML and Javascript together so I’ll pass on the Site Builder side of things.

 

After I click continue we’re taken to EnCirca’s website to finalize the registration and with any luck within a few minutes of purchasing and completing the registration we should receive an email with some good news:

Alright, now that we have a domain name let’s find out how to host things on it.

Using Amazon Route53 with a .BOT domain

Amazon Route 53 is a highly available and scalable DNS with robust APIs, healthchecks, service discovery, and many other features. I definitely want to use this to host my new domain. The first thing I’ll do is navigate to the Route53 console and create a hosted zone with the same name as my domain.


Great! Now, I need to take the Name Server (NS) records that Route53 created for me and use EnCirca’s portal to add these as the authoritative nameservers on the domain.

Now I just add my records to my hosted zone and I should be able to serve traffic! Way cool, I’ve got my very own .bot domain for @WhereML.

Next Steps

  • I could and should add to the security of my site by creating TLS certificates for people who intend to access my domain over TLS. Luckily with AWS Certificate Manager (ACM) this is extremely straightforward and I’ve got my subdomains and root domain verified in just a few clicks.
  • I could create a cloudfront distrobution to front an S3 static single page application to host my entire chatbot and invoke Amazon Lex with a cognito identity right from the browser.

Randall

Serverless Architectures with AWS Lambda: Overview and Best Practices

Post Syndicated from Andrew Baird original https://aws.amazon.com/blogs/architecture/serverless-architectures-with-aws-lambda-overview-and-best-practices/

For some organizations, the idea of “going serverless” can be daunting. But with an understanding of best practices – and the right tools — many serverless applications can be fully functional with only a few lines of code and little else.

Examples of fully-serverless-application use cases include:

  • Web or mobile backends – Create fully-serverless, mobile applications or websites by creating user-facing content in a native mobile application or static web content in an S3 bucket. Then have your front-end content integrate with Amazon API Gateway as a backend service API. Lambda functions will then execute the business logic you’ve written for each of the API Gateway methods in your backend API.
  • Chatbots and virtual assistants – Build new serverless ways to interact with your customers, like customer support assistants and bots ready to engage customers on your company-run social media pages. The Amazon Alexa Skills Kit (ASK) and Amazon Lex have the ability to apply natural-language understanding to user-voice and freeform-text input so that a Lambda function you write can intelligently respond and engage with them.
  • Internet of Things (IoT) backends – AWS IoT has direct-integration for device messages to be routed to and processed by Lambda functions. That means you can implement serverless backends for highly secure, scalable IoT applications for uses like connected consumer appliances and intelligent manufacturing facilities.

Using AWS Lambda as the logic layer of a serverless application can enable faster development speed and greater experimentation – and innovation — than in a traditional, server-based environment.

We recently published the “Serverless Architectures with AWS Lambda: Overview and Best Practices” whitepaper to provide the guidance and best practices you need to write better Lambda functions and build better serverless architectures.

Once you’ve finished reading the whitepaper, below are a couple additional resources I recommend as your next step:

  1. If you would like to better understand some of the architecture pattern possibilities for serverless applications: Thirty Serverless Architectures in 30 Minutes (re:Invent 2017 video)
  2. If you’re ready to get hands-on and build a sample serverless application: AWS Serverless Workshops (GitHub Repository)
  3. If you’ve already built a serverless application and you’d like to ensure your application has been Well Architected: The Serverless Application Lens: AWS Well Architected Framework (Whitepaper)

About the Author

 

Andrew Baird is a Sr. Solutions Architect for AWS. Prior to becoming a Solutions Architect, Andrew was a developer, including time as an SDE with Amazon.com. He has worked on large-scale distributed systems, public-facing APIs, and operations automation.

The End of Google Cloud Messaging, and What it Means for Your Apps

Post Syndicated from Zach Barbitta original https://aws.amazon.com/blogs/messaging-and-targeting/the-end-of-google-cloud-messaging-and-what-it-means-for-your-apps/

On April 10, 2018, Google announced the deprecation of its Google Cloud Messaging (GCM) platform. Specifically, the GCM server and client APIs are deprecated and will be removed as soon as April 11, 2019.  What does this mean for you and your applications that use Amazon Simple Notification Service (Amazon SNS) or Amazon Pinpoint?

First, nothing will break now or after April 11, 2019. GCM device tokens are completely interchangeable with the newer Firebase Cloud Messaging (FCM) device tokens. If you have existing GCM tokens, you’ll still be able to use them to send notifications. This statement is also true for GCM tokens that you generate in the future.

On the back end, we’ve already migrated Amazon SNS and Amazon Pinpoint to the server endpoint for FCM (https://fcm.googleapis.com/fcm/send). As a developer, you don’t need to make any changes as a result of this deprecation.

We created the following mini-FAQ to address some of the questions you may have as a developer who uses Amazon SNS or Amazon Pinpoint.

If I migrate to FCM from GCM, can I still use Amazon Pinpoint and Amazon SNS?

Yes. Your ability to connect to your applications and send messages through both Amazon SNS and Amazon Pinpoint doesn’t change. We’ll update the documentation for Amazon SNS and Amazon Pinpoint soon to reflect these changes.

If I don’t migrate to FCM from GCM, can I still use Amazon Pinpoint and Amazon SNS?

Yes. If you do nothing, your existing credentials and GCM tokens will still be valid. All applications that you previously set up to use Amazon Pinpoint or Amazon SNS will continue to work normally. When you call the API for Amazon Pinpoint or Amazon SNS, we initiate a request to the FCM server endpoint directly.

What are the differences between Amazon SNS and Amazon Pinpoint?

Amazon SNS makes it easy for developers to set up, operate, and send notifications at scale, affordably and with a high degree of flexibility. Amazon Pinpoint has many of the same messaging capabilities as Amazon SNS, with the same levels of scalability and flexibility.

The main difference between the two services is that Amazon Pinpoint provides both transactional and targeted messaging capabilities. By using Amazon Pinpoint, marketers and developers can not only send transactional messages to their customers, but can also segment their audiences, create campaigns, and analyze both application and message metrics.

How do I migrate from GCM to FCM?

For more information about migrating from GCM to FCM, see Migrate a GCM Client App for Android to Firebase Cloud Messaging on the Google Developers site.

If you have any questions, please post them in the comments section, or in the Amazon Pinpoint or Amazon SNS forums.

Achieving Major Stability and Performance Improvements in Yahoo Mail with a Novel Redux Architecture

Post Syndicated from mikesefanov original https://yahooeng.tumblr.com/post/173062946866

yahoodevelopers:

By Mohit Goenka, Gnanavel Shanmugam, and Lance Welsh

At Yahoo Mail, we’re constantly striving to upgrade our product experience. We do this not only by adding new features based on our members’ feedback, but also by providing the best technical solutions to power the most engaging experiences. As such, we’ve recently introduced a number of novel and unique revisions to the way in which we use Redux that have resulted in significant stability and performance improvements. Developers may find our methods useful in achieving similar results in their apps.

Improvements to product metrics

Last year Yahoo Mail implemented a brand new architecture using Redux. Since then, we have transformed the overall architecture to reduce latencies in various operations, reduce JavaScript exceptions, and better synchronized states. As a result, the product is much faster and more stable.

Stability improvements:

  • when checking for new emails – 20%
  • when reading emails – 30%
  • when sending emails – 20%

Performance improvements:

  • 10% improvement in page load performance
  • 40% improvement in frame rendering time

We have also reduced API calls by approximately 20%.

How we use Redux in Yahoo Mail

Redux architecture is reliant on one large store that represents the application state. In a Redux cycle, action creators dispatch actions to change the state of the store. React Components then respond to those state changes. We’ve made some modifications on top of this architecture that are atypical in the React-Redux community.

For instance, when fetching data over the network, the traditional methodology is to use Thunk middleware. Yahoo Mail fetches data over the network from our API. Thunks would create an unnecessary and undesirable dependency between the action creators and our API. If and when the API changes, the action creators must then also change. To keep these concerns separate we dispatch the action payload from the action creator to store them in the Redux state for later processing by “action syncers”. Action syncers use the payload information from the store to make requests to the API and process responses. In other words, the action syncers form an API layer by interacting with the store. An additional benefit to keeping the concerns separate is that the API layer can change as the backend changes, thereby preventing such changes from bubbling back up into the action creators and components. This also allowed us to optimize the API calls by batching, deduping, and processing the requests only when the network is available. We applied similar strategies for handling other side effects like route handling and instrumentation. Overall, action syncers helped us to reduce our API calls by ~20% and bring down API errors by 20-30%.

Another change to the normal Redux architecture was made to avoid unnecessary props. The React-Redux community has learned to avoid passing unnecessary props from high-level components through multiple layers down to lower-level components (prop drilling) for rendering. We have introduced action enhancers middleware to avoid passing additional unnecessary props that are purely used when dispatching actions. Action enhancers add data to the action payload so that data does not have to come from the component when dispatching the action. This avoids the component from having to receive that data through props and has improved frame rendering by ~40%. The use of action enhancers also avoids writing utility functions to add commonly-used data to each action from action creators.

image

In our new architecture, the store reducers accept the dispatched action via action enhancers to update the state. The store then updates the UI, completing the action cycle. Action syncers then initiate the call to the backend APIs to synchronize local changes.

Conclusion

Our novel use of Redux in Yahoo Mail has led to significant user-facing benefits through a more performant application. It has also reduced development cycles for new features due to its simplified architecture. We’re excited to share our work with the community and would love to hear from anyone interested in learning more.

AWS AppSync – Production-Ready with Six New Features

Post Syndicated from Jeff Barr original https://aws.amazon.com/blogs/aws/aws-appsync-production-ready-with-six-new-features/

If you build (or want to build) data-driven web and mobile apps and need real-time updates and the ability to work offline, you should take a look at AWS AppSync. Announced in preview form at AWS re:Invent 2017 and described in depth here, AWS AppSync is designed for use in iOS, Android, JavaScript, and React Native apps. AWS AppSync is built around GraphQL, an open, standardized query language that makes it easy for your applications to request the precise data that they need from the cloud.

I’m happy to announce that the preview period is over and that AWS AppSync is now generally available and production-ready, with six new features that will simplify and streamline your application development process:

Console Log Access – You can now see the CloudWatch Logs entries that are created when you test your GraphQL queries, mutations, and subscriptions from within the AWS AppSync Console.

Console Testing with Mock Data – You can now create and use mock context objects in the console for testing purposes.

Subscription Resolvers – You can now create resolvers for AWS AppSync subscription requests, just as you can already do for query and mutate requests.

Batch GraphQL Operations for DynamoDB – You can now make use of DynamoDB’s batch operations (BatchGetItem and BatchWriteItem) across one or more tables. in your resolver functions.

CloudWatch Support – You can now use Amazon CloudWatch Metrics and CloudWatch Logs to monitor calls to the AWS AppSync APIs.

CloudFormation Support – You can now define your schemas, data sources, and resolvers using AWS CloudFormation templates.

A Brief AppSync Review
Before diving in to the new features, let’s review the process of creating an AWS AppSync API, starting from the console. I click Create API to begin:

I enter a name for my API and (for demo purposes) choose to use the Sample schema:

The schema defines a collection of GraphQL object types. Each object type has a set of fields, with optional arguments:

If I was creating an API of my own I would enter my schema at this point. Since I am using the sample, I don’t need to do this. Either way, I click on Create to proceed:

The GraphQL schema type defines the entry points for the operations on the data. All of the data stored on behalf of a particular schema must be accessible using a path that begins at one of these entry points. The console provides me with an endpoint and key for my API:

It also provides me with guidance and a set of fully functional sample apps that I can clone:

When I clicked Create, AWS AppSync created a pair of Amazon DynamoDB tables for me. I can click Data Sources to see them:

I can also see and modify my schema, issue queries, and modify an assortment of settings for my API.

Let’s take a quick look at each new feature…

Console Log Access
The AWS AppSync Console already allows me to issue queries and to see the results, and now provides access to relevant log entries.In order to see the entries, I must enable logs (as detailed below), open up the LOGS, and check the checkbox. Here’s a simple mutation query that adds a new event. I enter the query and click the arrow to test it:

I can click VIEW IN CLOUDWATCH for a more detailed view:

To learn more, read Test and Debug Resolvers.

Console Testing with Mock Data
You can now create a context object in the console where it will be passed to one of your resolvers for testing purposes. I’ll add a testResolver item to my schema:

Then I locate it on the right-hand side of the Schema page and click Attach:

I choose a data source (this is for testing and the actual source will not be accessed), and use the Put item mapping template:

Then I click Select test context, choose Create New Context, assign a name to my test content, and click Save (as you can see, the test context contains the arguments from the query along with values to be returned for each field of the result):

After I save the new Resolver, I click Test to see the request and the response:

Subscription Resolvers
Your AWS AppSync application can monitor changes to any data source using the @aws_subscribe GraphQL schema directive and defining a Subscription type. The AWS AppSync client SDK connects to AWS AppSync using MQTT over Websockets and the application is notified after each mutation. You can now attach resolvers (which convert GraphQL payloads into the protocol needed by the underlying storage system) to your subscription fields and perform authorization checks when clients attempt to connect. This allows you to perform the same fine grained authorization routines across queries, mutations, and subscriptions.

To learn more about this feature, read Real-Time Data.

Batch GraphQL Operations
Your resolvers can now make use of DynamoDB batch operations that span one or more tables in a region. This allows you to use a list of keys in a single query, read records multiple tables, write records in bulk to multiple tables, and conditionally write or delete related records across multiple tables.

In order to use this feature the IAM role that you use to access your tables must grant access to DynamoDB’s BatchGetItem and BatchPutItem functions.

To learn more, read the DynamoDB Batch Resolvers tutorial.

CloudWatch Logs Support
You can now tell AWS AppSync to log API requests to CloudWatch Logs. Click on Settings and Enable logs, then choose the IAM role and the log level:

CloudFormation Support
You can use the following CloudFormation resource types in your templates to define AWS AppSync resources:

AWS::AppSync::GraphQLApi – Defines an AppSync API in terms of a data source (an Amazon Elasticsearch Service domain or a DynamoDB table).

AWS::AppSync::ApiKey – Defines the access key needed to access the data source.

AWS::AppSync::GraphQLSchema – Defines a GraphQL schema.

AWS::AppSync::DataSource – Defines a data source.

AWS::AppSync::Resolver – Defines a resolver by referencing a schema and a data source, and includes a mapping template for requests.

Here’s a simple schema definition in YAML form:

  AppSyncSchema:
    Type: "AWS::AppSync::GraphQLSchema"
    DependsOn:
      - AppSyncGraphQLApi
    Properties:
      ApiId: !GetAtt AppSyncGraphQLApi.ApiId
      Definition: |
        schema {
          query: Query
          mutation: Mutation
        }
        type Query {
          singlePost(id: ID!): Post
          allPosts: [Post]
        }
        type Mutation {
          putPost(id: ID!, title: String!): Post
        }
        type Post {
          id: ID!
          title: String!
        }

Available Now
These new features are available now and you can start using them today! Here are a couple of blog posts and other resources that you might find to be of interest:

Jeff;

 

 

Rotate Amazon RDS database credentials automatically with AWS Secrets Manager

Post Syndicated from Apurv Awasthi original https://aws.amazon.com/blogs/security/rotate-amazon-rds-database-credentials-automatically-with-aws-secrets-manager/

Recently, we launched AWS Secrets Manager, a service that makes it easier to rotate, manage, and retrieve database credentials, API keys, and other secrets throughout their lifecycle. You can configure Secrets Manager to rotate secrets automatically, which can help you meet your security and compliance needs. Secrets Manager offers built-in integrations for MySQL, PostgreSQL, and Amazon Aurora on Amazon RDS, and can rotate credentials for these databases natively. You can control access to your secrets by using fine-grained AWS Identity and Access Management (IAM) policies. To retrieve secrets, employees replace plaintext secrets with a call to Secrets Manager APIs, eliminating the need to hard-code secrets in source code or update configuration files and redeploy code when secrets are rotated.

In this post, I introduce the key features of Secrets Manager. I then show you how to store a database credential for a MySQL database hosted on Amazon RDS and how your applications can access this secret. Finally, I show you how to configure Secrets Manager to rotate this secret automatically.

Key features of Secrets Manager

These features include the ability to:

  • Rotate secrets safely. You can configure Secrets Manager to rotate secrets automatically without disrupting your applications. Secrets Manager offers built-in integrations for rotating credentials for Amazon RDS databases for MySQL, PostgreSQL, and Amazon Aurora. You can extend Secrets Manager to meet your custom rotation requirements by creating an AWS Lambda function to rotate other types of secrets. For example, you can create an AWS Lambda function to rotate OAuth tokens used in a mobile application. Users and applications retrieve the secret from Secrets Manager, eliminating the need to email secrets to developers or update and redeploy applications after AWS Secrets Manager rotates a secret.
  • Secure and manage secrets centrally. You can store, view, and manage all your secrets. By default, Secrets Manager encrypts these secrets with encryption keys that you own and control. Using fine-grained IAM policies, you can control access to secrets. For example, you can require developers to provide a second factor of authentication when they attempt to retrieve a production database credential. You can also tag secrets to help you discover, organize, and control access to secrets used throughout your organization.
  • Monitor and audit easily. Secrets Manager integrates with AWS logging and monitoring services to enable you to meet your security and compliance requirements. For example, you can audit AWS CloudTrail logs to see when Secrets Manager rotated a secret or configure AWS CloudWatch Events to alert you when an administrator deletes a secret.
  • Pay as you go. Pay for the secrets you store in Secrets Manager and for the use of these secrets; there are no long-term contracts or licensing fees.

Get started with Secrets Manager

Now that you’re familiar with the key features, I’ll show you how to store the credential for a MySQL database hosted on Amazon RDS. To demonstrate how to retrieve and use the secret, I use a python application running on Amazon EC2 that requires this database credential to access the MySQL instance. Finally, I show how to configure Secrets Manager to rotate this database credential automatically. Let’s get started.

Phase 1: Store a secret in Secrets Manager

  1. Open the Secrets Manager console and select Store a new secret.
     
    Secrets Manager console interface
     
  2. I select Credentials for RDS database because I’m storing credentials for a MySQL database hosted on Amazon RDS. For this example, I store the credentials for the database superuser. I start by securing the superuser because it’s the most powerful database credential and has full access over the database.
     
    Store a new secret interface with Credentials for RDS database selected
     

    Note: For this example, you need permissions to store secrets in Secrets Manager. To grant these permissions, you can use the AWSSecretsManagerReadWriteAccess managed policy. Read the AWS Secrets Manager Documentation for more information about the minimum IAM permissions required to store a secret.

  3. Next, I review the encryption setting and choose to use the default encryption settings. Secrets Manager will encrypt this secret using the Secrets Manager DefaultEncryptionKeyDefaultEncryptionKey in this account. Alternatively, I can choose to encrypt using a customer master key (CMK) that I have stored in AWS KMS.
     
    Select the encryption key interface
     
  4. Next, I view the list of Amazon RDS instances in my account and select the database this credential accesses. For this example, I select the DB instance mysql-rds-database, and then I select Next.
     
    Select the RDS database interface
     
  5. In this step, I specify values for Secret Name and Description. For this example, I use Applications/MyApp/MySQL-RDS-Database as the name and enter a description of this secret, and then select Next.
     
    Secret Name and description interface
     
  6. For the next step, I keep the default setting Disable automatic rotation because my secret is used by my application running on Amazon EC2. I’ll enable rotation after I’ve updated my application (see Phase 2 below) to use Secrets Manager APIs to retrieve secrets. I then select Next.

    Note: If you’re storing a secret that you’re not using in your application, select Enable automatic rotation. See our AWS Secrets Manager getting started guide on rotation for details.

     
    Configure automatic rotation interface
     

  7. Review the information on the next screen and, if everything looks correct, select Store. We’ve now successfully stored a secret in Secrets Manager.
  8. Next, I select See sample code.
     
    The See sample code button
     
  9. Take note of the code samples provided. I will use this code to update my application to retrieve the secret using Secrets Manager APIs.
     
    Python sample code
     

Phase 2: Update an application to retrieve secret from Secrets Manager

Now that I have stored the secret in Secrets Manager, I update my application to retrieve the database credential from Secrets Manager instead of hard coding this information in a configuration file or source code. For this example, I show how to configure a python application to retrieve this secret from Secrets Manager.

  1. I connect to my Amazon EC2 instance via Secure Shell (SSH).
  2. Previously, I configured my application to retrieve the database user name and password from the configuration file. Below is the source code for my application.
    import MySQLdb
    import config

    def no_secrets_manager_sample()

    # Get the user name, password, and database connection information from a config file.
    database = config.database
    user_name = config.user_name
    password = config.password

    # Use the user name, password, and database connection information to connect to the database
    db = MySQLdb.connect(database.endpoint, user_name, password, database.db_name, database.port)

  3. I use the sample code from Phase 1 above and update my application to retrieve the user name and password from Secrets Manager. This code sets up the client and retrieves and decrypts the secret Applications/MyApp/MySQL-RDS-Database. I’ve added comments to the code to make the code easier to understand.
    # Use the code snippet provided by Secrets Manager.
    import boto3
    from botocore.exceptions import ClientError

    def get_secret():
    #Define the secret you want to retrieve
    secret_name = "Applications/MyApp/MySQL-RDS-Database"
    #Define the Secrets mManager end-point your code should use.
    endpoint_url = "https://secretsmanager.us-east-1.amazonaws.com"
    region_name = "us-east-1"

    #Setup the client
    session = boto3.session.Session()
    client = session.client(
    service_name='secretsmanager',
    region_name=region_name,
    endpoint_url=endpoint_url
    )

    #Use the client to retrieve the secret
    try:
    get_secret_value_response = client.get_secret_value(
    SecretId=secret_name
    )
    #Error handling to make it easier for your code to tolerate faults
    except ClientError as e:
    if e.response['Error']['Code'] == 'ResourceNotFoundException':
    print("The requested secret " + secret_name + " was not found")
    elif e.response['Error']['Code'] == 'InvalidRequestException':
    print("The request was invalid due to:", e)
    elif e.response['Error']['Code'] == 'InvalidParameterException':
    print("The request had invalid params:", e)
    else:
    # Decrypted secret using the associated KMS CMK
    # Depending on whether the secret was a string or binary, one of these fields will be populated
    if 'SecretString' in get_secret_value_response:
    secret = get_secret_value_response['SecretString']
    else:
    binary_secret_data = get_secret_value_response['SecretBinary']

    # Your code goes here.

  4. Applications require permissions to access Secrets Manager. My application runs on Amazon EC2 and uses an IAM role to obtain access to AWS services. I will attach the following policy to my IAM role. This policy uses the GetSecretValue action to grant my application permissions to read secret from Secrets Manager. This policy also uses the resource element to limit my application to read only the Applications/MyApp/MySQL-RDS-Database secret from Secrets Manager. You can visit the AWS Secrets Manager Documentation to understand the minimum IAM permissions required to retrieve a secret.
    {
    "Version": "2012-10-17",
    "Statement": {
    "Sid": "RetrieveDbCredentialFromSecretsManager",
    "Effect": "Allow",
    "Action": "secretsmanager:GetSecretValue",
    "Resource": "arn:aws:secretsmanager:::secret:Applications/MyApp/MySQL-RDS-Database"
    }
    }

Phase 3: Enable Rotation for Your Secret

Rotating secrets periodically is a security best practice because it reduces the risk of misuse of secrets. Secrets Manager makes it easy to follow this security best practice and offers built-in integrations for rotating credentials for MySQL, PostgreSQL, and Amazon Aurora databases hosted on Amazon RDS. When you enable rotation, Secrets Manager creates a Lambda function and attaches an IAM role to this function to execute rotations on a schedule you define.

Note: Configuring rotation is a privileged action that requires several IAM permissions and you should only grant this access to trusted individuals. To grant these permissions, you can use the AWS IAMFullAccess managed policy.

Next, I show you how to configure Secrets Manager to rotate the secret Applications/MyApp/MySQL-RDS-Database automatically.

  1. From the Secrets Manager console, I go to the list of secrets and choose the secret I created in the first step Applications/MyApp/MySQL-RDS-Database.
     
    List of secrets in the Secrets Manager console
     
  2. I scroll to Rotation configuration, and then select Edit rotation.
     
    Rotation configuration interface
     
  3. To enable rotation, I select Enable automatic rotation. I then choose how frequently I want Secrets Manager to rotate this secret. For this example, I set the rotation interval to 60 days.
     
    Edit rotation configuration interface
     
  4. Next, Secrets Manager requires permissions to rotate this secret on your behalf. Because I’m storing the superuser database credential, Secrets Manager can use this credential to perform rotations. Therefore, I select Use the secret that I provided in step 1, and then select Next.
     
    Select which secret to use in the Edit rotation configuration interface
     
  5. The banner on the next screen confirms that I have successfully configured rotation and the first rotation is in progress, which enables you to verify that rotation is functioning as expected. Secrets Manager will rotate this credential automatically every 60 days.
     
    Confirmation banner message
     

Summary

I introduced AWS Secrets Manager, explained the key benefits, and showed you how to help meet your compliance requirements by configuring AWS Secrets Manager to rotate database credentials automatically on your behalf. Secrets Manager helps you protect access to your applications, services, and IT resources without the upfront investment and on-going maintenance costs of operating your own secrets management infrastructure. To get started, visit the Secrets Manager console. To learn more, visit Secrets Manager documentation.

If you have comments about this post, submit them in the Comments section below. If you have questions about anything in this post, start a new thread on the Secrets Manager forum.

Want more AWS Security news? Follow us on Twitter.

Amazon SageMaker Now Supports Additional Instance Types, Local Mode, Open Sourced Containers, MXNet and Tensorflow Updates

Post Syndicated from Randall Hunt original https://aws.amazon.com/blogs/aws/amazon-sagemaker-roundup-sf/

Amazon SageMaker continues to iterate quickly and release new features on behalf of customers. Starting today, SageMaker adds support for many new instance types, local testing with the SDK, and Apache MXNet 1.1.0 and Tensorflow 1.6.0. Let’s take a quick look at each of these updates.

New Instance Types

Amazon SageMaker customers now have additional options for right-sizing their workloads for notebooks, training, and hosting. Notebook instances now support almost all T2, M4, P2, and P3 instance types with the exception of t2.micro, t2.small, and m4.large instances. Model training now supports nearly all M4, M5, C4, C5, P2, and P3 instances with the exception of m4.large, c4.large, and c5.large instances. Finally, model hosting now supports nearly all T2, M4, M5, C4, C5, P2, and P3 instances with the exception of m4.large instances. Many customers can take advantage of the newest P3, C5, and M5 instances to get the best price/performance for their workloads. Customers also take advantage of the burstable compute model on T2 instances for endpoints or notebooks that are used less frequently.

Open Sourced Containers, Local Mode, and TensorFlow 1.6.0 and MXNet 1.1.0

Today Amazon SageMaker has open sourced the MXNet and Tensorflow deep learning containers that power the MXNet and Tensorflow estimators in the SageMaker SDK. The ability to write Python scripts that conform to simple interface is still one of my favorite SageMaker features and now those containers can be additionally customized to include any additional libraries. You can download these containers locally to iterate and experiment which can accelerate your debugging cycle. When you’re ready go from local testing to production training and hosting you just change one line of code.

These containers launch with support for Tensorflow 1.6.0 and MXNet 1.1.0 as well. Tensorflow has a number of new 1.6.0 features including support for CUDA 9.0, cuDNN 7, and AVX instructions which allows for significant speedups in many training applications. MXNet 1.1.0 adds a number of new features including a Text API mxnet.text with support for text processing, indexing, glossaries, and more. Two of the really cool pre-trained embeddings included are GloVe and fastText.
<

Available Now
All of the features mentioned above are available today. As always please let us know on Twitter or in the comments below if you have any questions or if you’re building something interesting. Now, if you’ll excuse me I’m going to go experiment with some of those new MXNet APIs!

Randall

Tag Amazon EBS Snapshots on Creation and Implement Stronger Security Policies

Post Syndicated from Woo Kim original https://aws.amazon.com/blogs/compute/tag-amazon-ebs-snapshots-on-creation-and-implement-stronger-security-policies/

This blog was contributed by Rucha Nene, Sr. Product Manager for Amazon EBS

AWS customers use tags to track ownership of resources, implement compliance protocols, control access to resources via IAM policies, and drive their cost accounting processes. Last year, we made tagging for Amazon EC2 instances and Amazon EBS volumes easier by adding the ability to tag these resources upon creation. We are now extending this capability to EBS snapshots.

Earlier, you could tag your EBS snapshots only after the resource had been created and sometimes, ended up with EBS snapshots in an untagged state if tagging failed. You also could not control the actions that users and groups could take over specific snapshots, or enforce tighter security policies.

To address these issues, we are making tagging for EBS snapshots more flexible and giving customers more control over EBS snapshots by introducing two new capabilities:

  • Tag on creation for EBS snapshots – You can now specify tags for EBS snapshots as part of the API call that creates the resource or via the Amazon EC2 Console when creating an EBS snapshot.
  • Resource-level permission and enforced tag usage – The CreateSnapshot, DeleteSnapshot, and ModifySnapshotAttrribute API actions now support IAM resource-level permissions. You can now write IAM policies that mandate the use of specific tags when taking actions on EBS snapshots.

Tag on creation

You can now specify tags for EBS snapshots as part of the API call that creates the resources. The resource creation and the tagging are performed atomically; both must succeed in order for the operation CreateSnapshot to succeed. You no longer need to build tagging scripts that run after EBS snapshots have been created.

Here’s how you specify tags when you create an EBS snapshot, using the console:

  1. Open the Amazon EC2 console at https://console.aws.amazon.com/ec2/.
  2. In the navigation pane, choose Snapshots, Create Snapshot.
  3. On the Create Snapshot page, select the volume for which to create a snapshot.
  4. (Optional) Choose Add tags to your snapshot. For each tag, provide a tag key and a tag value.
  5. Choose Create Snapshot.

Using the AWS CLI:

aws ec2 create-snapshot --volume-id vol-0c0e757e277111f3c --description 'Prod_Backup' --tag-specifications 
'ResourceType=snapshot,Tags=[{Key=costcenter,Value=115},{Key=IsProd,Value=Yes}]'

To learn more, see Using Tags.

Resource-level permissions and enforced tag usage

CreateSnapshot, DeleteSnapshot, and ModifySnapshotAttribute now support resource-level permissions, which allow you to exercise more control over EBS snapshots. You can write IAM policies that give you precise control over access to resources and let you specify which users are able to create snapshots for a given set of volumes. You can also enforce the use of specific tags to help track resources and achieve more accurate cost allocation reporting.

For example, here’s a statement that requires that the costcenter tag (with a value of “115”) be present on the volume from which snapshots are being created. It requires that this tag be applied to all newly created snapshots. In addition, it requires that the created snapshots are tagged with User:username for the customer.

{
   "Version":"2012-10-17",
   "Statement":[
      {
         "Effect":"Allow",
         "Action":"ec2:CreateSnapshot",
         "Resource":"arn:aws:ec2:us-east-1:123456789012:volume/*",
	   "Condition": {
		"StringEquals":{
               "ec2:ResourceTag/costcenter":"115"
}
 }
	
      },
      {
         "Sid":"AllowCreateTaggedSnapshots",
         "Effect":"Allow",
         "Action":"ec2:CreateSnapshot",
         "Resource":"arn:aws:ec2:us-east-1::snapshot/*",
         "Condition":{
            "StringEquals":{
               "aws:RequestTag/costcenter":"115",
		   "aws:RequestTag/User":"${aws:username}"
            },
            "ForAllValues:StringEquals":{
               "aws:TagKeys":[
                  "costcenter",
			"User"
               ]
            }
         }
      },
      {
         "Effect":"Allow",
         "Action":"ec2:CreateTags",
         "Resource":"arn:aws:ec2:us-east-1::snapshot/*",
         "Condition":{
            "StringEquals":{
               "ec2:CreateAction":"CreateSnapshot"
            }
         }
      }
   ]
}

To implement stronger compliance and security policies, you could also restrict access to DeleteSnapshot, if the resource is not tagged with the user’s name. Here’s a statement that allows the deletion of a snapshot only if the snapshot is tagged with User:username for the customer.

{
   "Version":"2012-10-17",
   "Statement":[
      {
         "Effect":"Allow",
         "Action":"ec2:DeleteSnapshot",
         "Resource":"arn:aws:ec2:us-east-1::snapshot/*",
         "Condition":{
            "StringEquals":{
               "ec2:ResourceTag/User":"${aws:username}"
            }
         }
      }
   ]
}

To learn more and to see some sample policies, see IAM Policies for Amazon EC2 and Working with Snapshots.

Available Now

These new features are available now in all AWS Regions. You can start using it today from the Amazon EC2 Console, AWS Command Line Interface (CLI), or the AWS APIs.