Tag Archives: ARIA

[$] Finding Spectre vulnerabilities with smatch

Post Syndicated from corbet original https://lwn.net/Articles/752408/rss

The furor over the Meltdown and Spectre vulnerabilities has calmed a bit —
for now, at least — but that does not mean that developers have stopped
worrying about them. Spectre variant 1 (the bounds-check bypass
vulnerability) has been of particular concern because, while the kernel is
thought to contain numerous vulnerable spots, nobody really knows how to
find them all. As a result, the defenses that have been developed for
variant 1 have only been deployed in a few places. Recently, though,
Dan Carpenter has enhanced the smatch tool to enable it to find possibly
vulnerable code in the kernel.

Implementing safe AWS Lambda deployments with AWS CodeDeploy

Post Syndicated from Chris Munns original https://aws.amazon.com/blogs/compute/implementing-safe-aws-lambda-deployments-with-aws-codedeploy/

This post courtesy of George Mao, AWS Senior Serverless Specialist – Solutions Architect

AWS Lambda and AWS CodeDeploy recently made it possible to automatically shift incoming traffic between two function versions based on a preconfigured rollout strategy. This new feature allows you to gradually shift traffic to the new function. If there are any issues with the new code, you can quickly rollback and control the impact to your application.

Previously, you had to manually move 100% of traffic from the old version to the new version. Now, you can have CodeDeploy automatically execute pre- or post-deployment tests and automate a gradual rollout strategy. Traffic shifting is built right into the AWS Serverless Application Model (SAM), making it easy to define and deploy your traffic shifting capabilities. SAM is an extension of AWS CloudFormation that provides a simplified way of defining serverless applications.

In this post, I show you how to use SAM, CloudFormation, and CodeDeploy to accomplish an automated rollout strategy for safe Lambda deployments.


For this walkthrough, you write a Lambda application that returns a count of the S3 buckets that you own. You deploy it and use it in production. Later on, you receive requirements that tell you that you need to change your Lambda application to count only buckets that begin with the letter “a”.

Before you make the change, you need to be sure that your new Lambda application works as expected. If it does have issues, you want to minimize the number of impacted users and roll back easily. To accomplish this, you create a deployment process that publishes the new Lambda function, but does not send any traffic to it. You use CodeDeploy to execute a PreTraffic test to ensure that your new function works as expected. After the test succeeds, CodeDeploy automatically shifts traffic gradually to the new version of the Lambda function.

Your Lambda function is exposed as a REST service via an Amazon API Gateway deployment. This makes it easy to test and integrate.


To execute the SAM and CloudFormation deployment, you must have the following IAM permissions:

  • cloudformation:*
  • lambda:*
  • codedeploy:*
  • iam:create*

You may use the AWS SAM Local CLI or the AWS CLI to package and deploy your Lambda application. If you choose to use SAM Local, be sure to install it onto your system. For more information, see AWS SAM Local Installation.

All of the code used in this post can be found in this GitHub repository: https://github.com/aws-samples/aws-safe-lambda-deployments.


For this post, use SAM to define your resources because it comes with built-in CodeDeploy support for safe Lambda deployments.  The deployment is handled and automated by CloudFormation.

SAM allows you to define your Serverless applications in a simple and concise fashion, because it automatically creates all necessary resources behind the scenes. For example, if you do not define an execution role for a Lambda function, SAM automatically creates one. SAM also creates the CodeDeploy application necessary to drive the traffic shifting, as well as the IAM service role that CodeDeploy uses to execute all actions.

Create a SAM template

To get started, write your SAM template and call it template.yaml.

AWSTemplateFormatVersion : '2010-09-09'
Transform: AWS::Serverless-2016-10-31
Description: An example SAM template for Lambda Safe Deployments.


    Type: AWS::Serverless::Function
      Handler: returnS3Buckets.handler
      Runtime: nodejs6.10
      AutoPublishAlias: live
        - Version: "2012-10-17"
          - Effect: "Allow"
              - "s3:ListAllMyBuckets"
            Resource: '*'
          Type: Linear10PercentEvery1Minute
            PreTraffic: !Ref preTrafficHook
          Type: Api
            Path: /test
            Method: get

    Type: AWS::Serverless::Function
      Handler: preTrafficHook.handler
        - Version: "2012-10-17"
          - Effect: "Allow"
              - "codedeploy:PutLifecycleEventHookExecutionStatus"
              !Sub 'arn:aws:codedeploy:${AWS::Region}:${AWS::AccountId}:deploymentgroup:${ServerlessDeploymentApplication}/*'
        - Version: "2012-10-17"
          - Effect: "Allow"
              - "lambda:InvokeFunction"
            Resource: !Ref returnS3Buckets.Version
      Runtime: nodejs6.10
      FunctionName: 'CodeDeployHook_preTrafficHook'
        Enabled: false
      Timeout: 5
          NewVersion: !Ref returnS3Buckets.Version

This template creates two functions:

  • returnS3Buckets
  • preTrafficHook

The returnS3Buckets function is where your application logic lives. It’s a simple piece of code that uses the AWS SDK for JavaScript in Node.JS to call the Amazon S3 listBuckets API action and return the number of buckets.

'use strict';

var AWS = require('aws-sdk');
var s3 = new AWS.S3();

exports.handler = (event, context, callback) => {
	console.log("I am here! " + context.functionName  +  ":"  +  context.functionVersion);

	s3.listBuckets(function (err, data){
			console.log(err, err.stack);
			callback(null, {
				statusCode: 500,
				body: "Failed!"
			var allBuckets = data.Buckets;

			console.log("Total buckets: " + allBuckets.length);
			callback(null, {
				statusCode: 200,
				body: allBuckets.length

Review the key parts of the SAM template that defines returnS3Buckets:

  • The AutoPublishAlias attribute instructs SAM to automatically publish a new version of the Lambda function for each new deployment and link it to the live alias.
  • The Policies attribute specifies additional policy statements that SAM adds onto the automatically generated IAM role for this function. The first statement provides the function with permission to call listBuckets.
  • The DeploymentPreference attribute configures the type of rollout pattern to use. In this case, you are shifting traffic in a linear fashion, moving 10% of traffic every minute to the new version. For more information about supported patterns, see Serverless Application Model: Traffic Shifting Configurations.
  • The Hooks attribute specifies that you want to execute the preTrafficHook Lambda function before CodeDeploy automatically begins shifting traffic. This function should perform validation testing on the newly deployed Lambda version. This function invokes the new Lambda function and checks the results. If you’re satisfied with the tests, instruct CodeDeploy to proceed with the rollout via an API call to: codedeploy.putLifecycleEventHookExecutionStatus.
  • The Events attribute defines an API-based event source that can trigger this function. It accepts requests on the /test path using an HTTP GET method.
'use strict';

const AWS = require('aws-sdk');
const codedeploy = new AWS.CodeDeploy({apiVersion: '2014-10-06'});
var lambda = new AWS.Lambda();

exports.handler = (event, context, callback) => {

	console.log("Entering PreTraffic Hook!");
	// Read the DeploymentId & LifecycleEventHookExecutionId from the event payload
    var deploymentId = event.DeploymentId;
	var lifecycleEventHookExecutionId = event.LifecycleEventHookExecutionId;

	var functionToTest = process.env.NewVersion;
	console.log("Testing new function version: " + functionToTest);

	// Perform validation of the newly deployed Lambda version
	var lambdaParams = {
		FunctionName: functionToTest,
		InvocationType: "RequestResponse"

	var lambdaResult = "Failed";
	lambda.invoke(lambdaParams, function(err, data) {
		if (err){	// an error occurred
			console.log(err, err.stack);
			lambdaResult = "Failed";
		else{	// successful response
			var result = JSON.parse(data.Payload);
			console.log("Result: " +  JSON.stringify(result));

			// Check the response for valid results
			// The response will be a JSON payload with statusCode and body properties. ie:
			// {
			//		"statusCode": 200,
			//		"body": 51
			// }
			if(result.body == 9){	
				lambdaResult = "Succeeded";
				console.log ("Validation testing succeeded!");
				lambdaResult = "Failed";
				console.log ("Validation testing failed!");

			// Complete the PreTraffic Hook by sending CodeDeploy the validation status
			var params = {
				deploymentId: deploymentId,
				lifecycleEventHookExecutionId: lifecycleEventHookExecutionId,
				status: lambdaResult // status can be 'Succeeded' or 'Failed'
			// Pass AWS CodeDeploy the prepared validation test results.
			codedeploy.putLifecycleEventHookExecutionStatus(params, function(err, data) {
				if (err) {
					// Validation failed.
					console.log('CodeDeploy Status update failed');
					console.log(err, err.stack);
					callback("CodeDeploy Status update failed");
				} else {
					// Validation succeeded.
					console.log('Codedeploy status updated successfully');
					callback(null, 'Codedeploy status updated successfully');

The hook is hardcoded to check that the number of S3 buckets returned is 9.

Review the key parts of the SAM template that defines preTrafficHook:

  • The Policies attribute specifies additional policy statements that SAM adds onto the automatically generated IAM role for this function. The first statement provides permissions to call the CodeDeploy PutLifecycleEventHookExecutionStatus API action. The second statement provides permissions to invoke the specific version of the returnS3Buckets function to test
  • This function has traffic shifting features disabled by setting the DeploymentPreference option to false.
  • The FunctionName attribute explicitly tells CloudFormation what to name the function. Otherwise, CloudFormation creates the function with the default naming convention: [stackName]-[FunctionName]-[uniqueID].  Name the function with the “CodeDeployHook_” prefix because the CodeDeployServiceRole role only allows InvokeFunction on functions named with that prefix.
  • Set the Timeout attribute to allow enough time to complete your validation tests.
  • Use an environment variable to inject the ARN of the newest deployed version of the returnS3Buckets function. The ARN allows the function to know the specific version to invoke and perform validation testing on.

Deploy the function

Your SAM template is all set and the code is written—you’re ready to deploy the function for the first time. Here’s how to do it via the SAM CLI. Replace “sam” with “cloudformation” to use CloudFormation instead.

First, package the function. This command returns a CloudFormation importable file, packaged.yaml.

sam package –template-file template.yaml –s3-bucket mybucket –output-template-file packaged.yaml

Now deploy everything:

sam deploy –template-file packaged.yaml –stack-name mySafeDeployStack –capabilities CAPABILITY_IAM

At this point, both Lambda functions have been deployed within the CloudFormation stack mySafeDeployStack. The returnS3Buckets has been deployed as Version 1:

SAM automatically created a few things, including the CodeDeploy application, with the deployment pattern that you specified (Linear10PercentEvery1Minute). There is currently one deployment group, with no action, because no deployments have occurred. SAM also created the IAM service role that this CodeDeploy application uses:

There is a single managed policy attached to this role, which allows CodeDeploy to invoke any Lambda function that begins with “CodeDeployHook_”.

An API has been set up called safeDeployStack. It targets your Lambda function with the /test resource using the GET method. When you test the endpoint, API Gateway executes the returnS3Buckets function and it returns the number of S3 buckets that you own. In this case, it’s 51.

Publish a new Lambda function version

Now implement the requirements change, which is to make returnS3Buckets count only buckets that begin with the letter “a”. The code now looks like the following (see returnS3BucketsNew.js in GitHub):

'use strict';

var AWS = require('aws-sdk');
var s3 = new AWS.S3();

exports.handler = (event, context, callback) => {
	console.log("I am here! " + context.functionName  +  ":"  +  context.functionVersion);

	s3.listBuckets(function (err, data){
			console.log(err, err.stack);
			callback(null, {
				statusCode: 500,
				body: "Failed!"
			var allBuckets = data.Buckets;

			console.log("Total buckets: " + allBuckets.length);
			//callback(null, allBuckets.length);

			//  New Code begins here
			var counter=0;
			for(var i  in allBuckets){
				if(allBuckets[i].Name[0] === "a")
			console.log("Total buckets starting with a: " + counter);

			callback(null, {
				statusCode: 200,
				body: counter

Repackage and redeploy with the same two commands as earlier:

sam package –template-file template.yaml –s3-bucket mybucket –output-template-file packaged.yaml
sam deploy –template-file packaged.yaml –stack-name mySafeDeployStack –capabilities CAPABILITY_IAM

CloudFormation understands that this is a stack update instead of an entirely new stack. You can see that reflected in the CloudFormation console:

During the update, CloudFormation deploys the new Lambda function as version 2 and adds it to the “live” alias. There is no traffic routing there yet. CodeDeploy now takes over to begin the safe deployment process.

The first thing CodeDeploy does is invoke the preTrafficHook function. Verify that this happened by reviewing the Lambda logs and metrics:

The function should progress successfully, invoke Version 2 of returnS3Buckets, and finally invoke the CodeDeploy API with a success code. After this occurs, CodeDeploy begins the predefined rollout strategy. Open the CodeDeploy console to review the deployment progress (Linear10PercentEvery1Minute):

Verify the traffic shift

During the deployment, verify that the traffic shift has started to occur by running the test periodically. As the deployment shifts towards the new version, a larger percentage of the responses return 9 instead of 51. These numbers match the S3 buckets.

A minute later, you see 10% more traffic shifting to the new version. The whole process takes 10 minutes to complete. After completion, open the Lambda console and verify that the “live” alias now points to version 2:

After 10 minutes, the deployment is complete and CodeDeploy signals success to CloudFormation and completes the stack update.

Check the results

If you invoke the function alias manually, you see the results of the new implementation.

aws lambda invoke –function [lambda arn to live alias] out.txt

You can also execute the prod stage of your API and verify the results by issuing an HTTP GET to the invoke URL:


This post has shown you how you can safely automate your Lambda deployments using the Lambda traffic shifting feature. You used the Serverless Application Model (SAM) to define your Lambda functions and configured CodeDeploy to manage your deployment patterns. Finally, you used CloudFormation to automate the deployment and updates to your function and PreTraffic hook.

Now that you know all about this new feature, you’re ready to begin automating Lambda deployments with confidence that things will work as designed. I look forward to hearing about what you’ve built with the AWS Serverless Platform.

Confused About the Hybrid Cloud? You’re Not Alone

Post Syndicated from Roderick Bauer original https://www.backblaze.com/blog/confused-about-the-hybrid-cloud-youre-not-alone/

Hybrid Cloud. What is it?

Do you have a clear understanding of the hybrid cloud? If you don’t, it’s not surprising.

Hybrid cloud has been applied to a greater and more varied number of IT solutions than almost any other recent data management term. About the only thing that’s clear about the hybrid cloud is that the term hybrid cloud wasn’t invented by customers, but by vendors who wanted to hawk whatever solution du jour they happened to be pushing.

Let’s be honest. We’re in an industry that loves hype. We can’t resist grafting hyper, multi, ultra, and super and other prefixes onto the beginnings of words to entice customers with something new and shiny. The alphabet soup of cloud-related terms can include various options for where the cloud is located (on-premises, off-premises), whether the resources are private or shared in some degree (private, community, public), what type of services are offered (storage, computing), and what type of orchestrating software is used to manage the workflow and the resources. With so many moving parts, it’s no wonder potential users are confused.

Let’s take a step back, try to clear up the misconceptions, and come up with a basic understanding of what the hybrid cloud is. To be clear, this is our viewpoint. Others are free to do what they like, so bear that in mind.

So, What is the Hybrid Cloud?

The hybrid cloud refers to a cloud environment made up of a mixture of on-premises private cloud resources combined with third-party public cloud resources that use some kind of orchestration between them.

To get beyond the hype, let’s start with Forrester Research‘s idea of the hybrid cloud: “One or more public clouds connected to something in my data center. That thing could be a private cloud; that thing could just be traditional data center infrastructure.”

To put it simply, a hybrid cloud is a mash-up of on-premises and off-premises IT resources.

To expand on that a bit, we can say that the hybrid cloud refers to a cloud environment made up of a mixture of on-premises private cloud[1] resources combined with third-party public cloud resources that use some kind of orchestration[2] between them. The advantage of the hybrid cloud model is that it allows workloads and data to move between private and public clouds in a flexible way as demands, needs, and costs change, giving businesses greater flexibility and more options for data deployment and use.

In other words, if you have some IT resources in-house that you are replicating or augmenting with an external vendor, congrats, you have a hybrid cloud!

Private Cloud vs. Public Cloud

The cloud is really just a collection of purpose built servers. In a private cloud, the servers are dedicated to a single tenant or a group of related tenants. In a public cloud, the servers are shared between multiple unrelated tenants (customers). A public cloud is off-site, while a private cloud can be on-site or off-site — or on-prem or off-prem.

As an example, let’s look at a hybrid cloud meant for data storage, a hybrid data cloud. A company might set up a rule that says all accounting files that have not been touched in the last year are automatically moved off-prem to cloud storage to save cost and reduce the amount of storage needed on-site. The files are still available; they are just no longer stored on your local systems. The rules can be defined to fit an organization’s workflow and data retention policies.

The hybrid cloud concept also contains cloud computing. For example, at the end of the quarter, order processing application instances can be spun up off-premises in a hybrid computing cloud as needed to add to on-premises capacity.

Hybrid Cloud Benefits

If we accept that the hybrid cloud combines the best elements of private and public clouds, then the benefits of hybrid cloud solutions are clear, and we can identify the primary two benefits that result from the blending of private and public clouds.

Diagram of the Components of the Hybrid Cloud

Benefit 1: Flexibility and Scalability

Undoubtedly, the primary advantage of the hybrid cloud is its flexibility. It takes time and money to manage in-house IT infrastructure and adding capacity requires advance planning.

The cloud is ready and able to provide IT resources whenever needed on short notice. The term cloud bursting refers to the on-demand and temporary use of the public cloud when demand exceeds resources available in the private cloud. For example, some businesses experience seasonal spikes that can put an extra burden on private clouds. These spikes can be taken up by a public cloud. Demand also can vary with geographic location, events, or other variables. The public cloud provides the elasticity to deal with these and other anticipated and unanticipated IT loads. The alternative would be fixed cost investments in on-premises IT resources that might not be efficiently utilized.

For a data storage user, the on-premises private cloud storage provides, among other benefits, the highest speed access. For data that is not frequently accessed, or needed with the absolute lowest levels of latency, it makes sense for the organization to move it to a location that is secure, but less expensive. The data is still readily available, and the public cloud provides a better platform for sharing the data with specific clients, users, or with the general public.

Benefit 2: Cost Savings

The public cloud component of the hybrid cloud provides cost-effective IT resources without incurring capital expenses and labor costs. IT professionals can determine the best configuration, service provider, and location for each service, thereby cutting costs by matching the resource with the task best suited to it. Services can be easily scaled, redeployed, or reduced when necessary, saving costs through increased efficiency and avoiding unnecessary expenses.

Comparing Private vs Hybrid Cloud Storage Costs

To get an idea of the difference in storage costs between a purely on-premises solutions and one that uses a hybrid of private and public storage, we’ll present two scenarios. For each scenario we’ll use data storage amounts of 100 terabytes, 1 petabyte, and 2 petabytes. Each table is the same format, all we’ve done is change how the data is distributed: private (on-premises) cloud or public (off-premises) cloud. We are using the costs for our own B2 Cloud Storage in this example. The math can be adapted for any set of numbers you wish to use.

Scenario 1    100% of data on-premises storage

Data Stored
Data stored On-Premises: 100% 100 TB 1,000 TB 2,000 TB
On-premises cost range Monthly Cost
Low — $12/TB/Month $1,200 $12,000 $24,000
High — $20/TB/Month $2,000 $20,000 $40,000

Scenario 2    20% of data on-premises with 80% public cloud storage (B2)

Data Stored
Data stored On-Premises: 20% 20 TB 200 TB 400 TB
Data stored in Cloud: 80% 80 TB 800 TB 1,600 TB
On-premises cost range Monthly Cost
Low — $12/TB/Month $240 $2,400 $4,800
High — $20/TB/Month $400 $4,000 $8,000
Public cloud cost range Monthly Cost
Low — $5/TB/Month (B2) $400 $4,000 $8,000
High — $20/TB/Month $1,600 $16,000 $32,000
On-premises + public cloud cost range Monthly Cost
Low $640 $6,400 $12,800
High $2,000 $20,000 $40,000

As can be seen in the numbers above, using a hybrid cloud solution and storing 80% of the data in the cloud with a provider such as Backblaze B2 can result in significant savings over storing only on-premises. For other cost scenarios, see the B2 Cost Calculator.

When Hybrid Might Not Always Be the Right Fit

There are circumstances where the hybrid cloud might not be the best solution. Smaller organizations operating on a tight IT budget might best be served by a purely public cloud solution. The cost of setting up and running private servers is substantial.

An application that requires the highest possible speed might not be suitable for hybrid, depending on the specific cloud implementation. While latency does play a factor in data storage for some users, it is less of a factor for uploading and downloading data than it is for organizations using the hybrid cloud for computing. Because Backblaze recognized the importance of speed and low-latency for customers wishing to use computing on data stored in B2, we directly connected our data centers with those of our computing partners, ensuring that latency would not be an issue even for a hybrid cloud computing solution.

It is essential to have a good understanding of workloads and their essential characteristics in order to make the hybrid cloud work well for you. Each application needs to be examined for the right mix of private cloud, public cloud, and traditional IT resources that fit the particular workload in order to benefit most from a hybrid cloud architecture.

The Hybrid Cloud Can Be a Win-Win Solution

From the high altitude perspective, any solution that enables an organization to respond in a flexible manner to IT demands is a win. Avoiding big upfront capital expenses for in-house IT infrastructure will appeal to the CFO. Being able to quickly spin up IT resources as they’re needed will appeal to the CTO and VP of Operations.

Should You Go Hybrid?

We’ve arrived at the bottom line and the question is, should you or your organization embrace hybrid cloud infrastructures?

According to 451 Research, by 2019, 69% of companies will operate in hybrid cloud environments, and 60% of workloads will be running in some form of hosted cloud service (up from 45% in 2017). That indicates that the benefits of the hybrid cloud appeal to a broad range of companies.

In Two Years, More Than Half of Workloads Will Run in Cloud

Clearly, depending on an organization’s needs, there are advantages to a hybrid solution. While it might have been possible to dismiss the hybrid cloud in the early days of the cloud as nothing more than a buzzword, that’s no longer true. The hybrid cloud has evolved beyond the marketing hype to offer real solutions for an increasingly complex and challenging IT environment.

If an organization approaches the hybrid cloud with sufficient planning and a structured approach, a hybrid cloud can deliver on-demand flexibility, empower legacy systems and applications with new capabilities, and become a catalyst for digital transformation. The result can be an elastic and responsive infrastructure that has the ability to quickly respond to changing demands of the business.

As data management professionals increasingly recognize the advantages of the hybrid cloud, we can expect more and more of them to embrace it as an essential part of their IT strategy.

Tell Us What You’re Doing with the Hybrid Cloud

Are you currently embracing the hybrid cloud, or are you still uncertain or hanging back because you’re satisfied with how things are currently? Maybe you’ve gone totally hybrid. We’d love to hear your comments below on how you’re dealing with the hybrid cloud.

[1] Private cloud can be on-premises or a dedicated off-premises facility.

[2] Hybrid cloud orchestration solutions are often proprietary, vertical, and task dependent.

The post Confused About the Hybrid Cloud? You’re Not Alone appeared first on Backblaze Blog | Cloud Storage & Cloud Backup.

Start a CoderDojo with our free online training

Post Syndicated from Alex Bate original https://www.raspberrypi.org/blog/start-a-coderdojo-with-our-free-online-training/

You can now sign up to our newest free online course Start a CoderDojo to learn more about CoderDojo and how you can easily set up one of these free coding clubs for young people in your area. With less than two weeks until the course begins, we wanted to tell you about the course’s content and why the course’s creator put it together for you.

Start a CoderDojo || free online learning || Raspberry Pi Foundation

Get support and advice on how to grow your confidence in coding and start a CoderDojo for young people in your area.

What is CoderDojo?

CoderDojo is a global network of free, volunteer-led, community-based programming clubs for young people aged 7 to 17. There are currently more than 1700 Dojos running regularly across 75 countries. All of these clubs were started by individuals who are passionate about giving young people the opportunity to learn to code. Some people assume you need technical skills to start a Dojo, but that’s not true. The most important thing is that you can bring people together for a shared goal.

What is covered on the course?

The course was developed by Philip, CoderDojo’s Educational Content Lead. It gives those who think empowering young people to be tech creators is important the resources and supports to achieve that goal by starting a Dojo. Divided over three weeks and running for about four hours in total, the course provides practical advice and resources on everything you need to know to plan and run a fun, social, and creative coding club for young people.

“In the first week, you’ll look at what coding is, at the worldwide CoderDojo community of coding clubs, and at the creative approach CoderDojos take to helping young people learn to code. In week two, you’ll move on to setting up your Dojo with a team, a venue, and any needed materials. You’ll also look at how to find young people to attend. Week three wraps up the course by giving you sample plans for a Dojo session and a Dojo’s year, and we’ll be talking about how to grow and develop your Dojo over time as your attendees become better coders.”
— Philip

Who is the course for?

Anyone interested in enabling young people to be tech creators should take this course. Parents, teachers, librarians, IT professionals, youth workers, and others have all started Dojos in their community. They say that “it’s an amazing experience that led [them] to expand [their] personal horizons”, and that they “find it really rewarding”.

The course is free and open to all — if you’re interested, then sign up now.

If you’re already mentoring at a Dojo, the course is a great opportunity to revise what you’ve learnt, and a chance to share your insights with newcomers in the discussion sections. Parents and guardians who wish to learn more about CoderDojo and are considering getting involved are also more than welcome to join.

The post Start a CoderDojo with our free online training appeared first on Raspberry Pi.

Let’s stop talking about password strength

Post Syndicated from Robert Graham original https://blog.erratasec.com/2018/04/lets-stop-talking-about-password.html

Picture from EFF — CC-BY license

Near the top of most security recommendations is to use “strong passwords”. We need to stop doing this.

Yes, weak passwords can be a problem. If a website gets hacked, weak passwords are easier to crack. It’s not that this is wrong advice.

On the other hand, it’s not particularly good advice, either. It’s far down the list of important advice that people need to remember. “Weak passwords” are nowhere near the risk of “password reuse”. When your Facebook or email account gets hacked, it’s because you used the same password across many websites, not because you used a weak password.

Important websites, where the strength of your password matters, already take care of the problem. They use strong, salted hashes on the backend to protect the password. On the frontend, they force passwords to be a certain length and a certain complexity. Maybe the better advice is to not trust any website that doesn’t enforce stronger passwords (minimum of 8 characters consisting of both letters and non-letters).

To some extent, this “strong password” advice has become obsolete. A decade ago, websites had poor protection (MD5 hashes) and no enforcement of complexity, so it was up to the user to choose strong passwords. Now that important websites have changed their behavior, such as using bcrypt, there is less onus on the user.

But the real issue here is that “strong password” advice reflects the evil, authoritarian impulses of the infosec community. Instead of measuring insecurity in terms of costs vs. benefits, risks vs. rewards, we insist that it’s an issue of moral weakness. We pretend that flaws happen because people are greedy, lazy, and ignorant. We pretend that security is its own goal, a benefit we should achieve, rather than a cost we must endure.

We like giving moral advice because it’s easy: just be “stronger”. Discussing “password reuse” is more complicated, forcing us discuss password managers, writing down passwords on paper, that it’s okay to reuse passwords for crappy websites you don’t care about, and so on.

What I’m trying to say is that the moral weakness here is us. Rather then give pertinent advice we give lazy advice. We give the advice that victim shames them for being weak while pretending that we are strong.

So stop telling people to use strong passwords. It’s crass advice on your part and largely unhelpful for your audience, distracting them from the more important things.

Директивата за авторското право: компромисен проект на Българското председателство, април 2018

Post Syndicated from nellyo original https://nellyo.wordpress.com/2018/04/14/copyrigt_dir_bg_pres_compr/

Актуални новини за  хода на Директивата за авторското право в цифровия единен пазар – и участието на Българското председателство в процеса на постигане на съгласие по текстовете.

В Twitter се разпространяват два документа, публикувани на сайта на Австрийския парламент.

Компромисът на Българското председателство, който ще се обсъжда в понеделник, 16 април:


И заедно с това уточнения и предложения по спорните разпоредби, вкл. чл.11 и чл.13 – отново предложение на Българското председателство:


Build a house in Minecraft using Python

Post Syndicated from Rob Zwetsloot original https://www.raspberrypi.org/blog/build-minecraft-house-using-python/

In this tutorial from The MagPi issue 68, Steve Martin takes us through the process of house-building in Minecraft Pi. Get your copy of The MagPi in stores now, or download it as a free PDF here.

Minecraft Pi is provided for free as part of the Raspbian operating system. To start your Minecraft: Pi Edition adventures, try our free tutorial Getting started with Minecraft.

Minecraft Raspberry Pi

Writing programs that create things in Minecraft is not only a great way to learn how to code, but it also means that you have a program that you can run again and again to make as many copies of your Minecraft design as you want. You never need to worry about your creation being destroyed by your brother or sister ever again — simply rerun your program and get it back! Whilst it might take a little longer to write the program than to build one house, once it’s finished you can build as many houses as you want.

Co-ordinates in Minecraft

Let’s start with a review of the coordinate system that Minecraft uses to know where to place blocks. If you are already familiar with this, you can skip to the next section. Otherwise, read on.

Minecraft Raspberry Pi Edition

Plan view of our house design

Minecraft shows us a three-dimensional (3D) view of the world. Imagine that the room you are in is the Minecraft world and you want to describe your location within that room. You can do so with three numbers, as follows:

  • How far across the room are you? As you move from side to side, you change this number. We can consider this value to be our X coordinate.
  • How high off the ground are you? If you are upstairs, or if you jump, this value increases. We can consider this value to be our Y coordinate.
  • How far into the room are you? As you walk forwards or backwards, you change this number. We can consider this value to be our Z coordinate.

You might have done graphs in school with X going across the page and Y going up the page. Coordinates in Minecraft are very similar, except that we have an extra value, Z, for our third dimension. Don’t worry if this still seems a little confusing: once we start to build our house, you will see how these three dimensions work in Minecraft.

Designing our house

It is a good idea to start with a rough design for our house. This will help us to work out the values for the coordinates when we are adding doors and windows to our house. You don’t have to plan every detail of your house right away. It is always fun to enhance it once you have got the basic design written. The image above shows the plan view of the house design that we will be creating in this tutorial. Note that because this is a plan view, it only shows the X and Z co-ordinates; we can’t see how high anything is. Hopefully, you can imagine the house extending up from the screen.

We will build our house close to where the Minecraft player is standing. This a good idea when creating something in Minecraft with Python, as it saves us from having to walk around the Minecraft world to try to find our creation.

Starting our program

Type in the code as you work through this tutorial. You can use any editor you like; we would suggest either Python 3 (IDLE) or Thonny Python IDE, both of which you can find on the Raspberry Pi menu under Programming. Start by selecting the File menu and creating a new file. Save the file with a name of your choice; it must end with .py so that the Raspberry Pi knows that it is a Python program.

It is important to enter the code exactly as it is shown in the listing. Pay particular attention to both the spelling and capitalisation (upper- or lower-case letters) used. You may find that when you run your program the first time, it doesn’t work. This is very common and just means there’s a small error somewhere. The error message will give you a clue about where the error is.

It is good practice to start all of your Python programs with the first line shown in our listing. All other lines that start with a # are comments. These are ignored by Python, but they are a good way to remind us what the program is doing.

The two lines starting with from tell Python about the Minecraft API; this is a code library that our program will be using to talk to Minecraft. The line starting mc = creates a connection between our Python program and the game. Then we get the player’s location broken down into three variables: x, y, and z.

Building the shell of our house

To help us build our house, we define three variables that specify its width, height, and depth. Defining these variables makes it easy for us to change the size of our house later; it also makes the code easier to understand when we are setting the co-ordinates of the Minecraft bricks. For now, we suggest that you use the same values that we have; you can go back and change them once the house is complete and you want to alter its design.

It’s now time to start placing some bricks. We create the shell of our house with just two lines of code! These lines of code each use the setBlocks command to create a complete block of bricks. This function takes the following arguments:

setBlocks(x1, y1, z1, x2, y2, z2, block-id, data)

x1, y1, and z1 are the coordinates of one corner of the block of bricks that we want to create; x1, y1, and z1 are the coordinates of the other corner. The block-id is the type of block that we want to use. Some blocks require another value called data; we will see this being used later, but you can ignore it for now.

We have to work out the values that we need to use in place of x1, y1, z1, x1, y1, z1 for our walls. Note that what we want is a larger outer block made of bricks and that is filled with a slightly smaller block of air blocks. Yes, in Minecraft even air is actually just another type of block.

Once you have typed in the two lines that create the shell of your house, you almost ready to run your program. Before doing so, you must have Minecraft running and displaying the contents of your world. Do not have a world loaded with things that you have created, as they may get destroyed by the house that we are building. Go to a clear area in the Minecraft world before running the program. When you run your program, check for any errors in the ‘console’ window and fix them, repeatedly running the code again until you’ve corrected all the errors.

You should see a block of bricks now, as shown above. You may have to turn the player around in the Minecraft world before you can see your house.

Adding the floor and door

Now, let’s make our house a bit more interesting! Add the lines for the floor and door. Note that the floor extends beyond the boundary of the wall of the house; can you see how we achieve this?

Hint: look closely at how we calculate the x and z attributes as compared to when we created the house shell above. Also note that we use a value of y-1 to create the floor below our feet.

Minecraft doors are two blocks high, so we have to create them in two parts. This is where we have to use the data argument. A value of 0 is used for the lower half of the door, and a value of 8 is used for the upper half (the part with the windows in it). These values will create an open door. If we add 4 to each of these values, a closed door will be created.

Before you run your program again, move to a new location in Minecraft to build the house away from the previous one. Then run it to check that the floor and door are created; you will need to fix any errors again. Even if your program runs without errors, check that the floor and door are positioned correctly. If they aren’t, then you will need to check the arguments so setBlock and setBlocks are exactly as shown in the listing.

Adding windows

Hopefully you will agree that your house is beginning to take shape! Now let’s add some windows. Looking at the plan for our house, we can see that there is a window on each side; see if you can follow along. Add the four lines of code, one for each window.

Now you can move to yet another location and run the program again; you should have a window on each side of the house. Our house is starting to look pretty good!

Adding a roof

The final stage is to add a roof to the house. To do this we are going to use wooden stairs. We will do this inside a loop so that if you change the width of your house, more layers are added to the roof. Enter the rest of the code. Be careful with the indentation: I recommend using spaces and avoiding the use of tabs. After the if statement, you need to indent the code even further. Each indentation level needs four spaces, so below the line with if on it, you will need eight spaces.

Since some of these code lines are lengthy and indented a lot, you may well find that the text wraps around as you reach the right-hand side of your editor window — don’t worry about this. You will have to be careful to get those indents right, however.

Now move somewhere new in your world and run the complete program. Iron out any last bugs, then admire your house! Does it look how you expect? Can you make it better?

Customising your house

Now you can start to customise your house. It is a good idea to use Save As in the menu to save a new version of your program. Then you can keep different designs, or refer back to your previous program if you get to a point where you don’t understand why your new one doesn’t work.

Consider these changes:

  • Change the size of your house. Are you able also to move the door and windows so they stay in proportion?
  • Change the materials used for the house. An ice house placed in an area of snow would look really cool!
  • Add a back door to your house. Or make the front door a double-width door!

We hope that you have enjoyed writing this program to build a house. Now you can easily add a house to your Minecraft world whenever you want to by simply running this program.

Get the complete code for this project here.

Continue your Minecraft journey

Minecraft Pi’s programmable interface is an ideal platform for learning Python. If you’d like to try more of our free tutorials, check out:

You may also enjoy Martin O’Hanlon’s and David Whale’s Adventures in Minecraft, and the Hacking and Making in Minecraft MagPi Essentials guide, which you can download for free or buy in print here.

The post Build a house in Minecraft using Python appeared first on Raspberry Pi.

Using AWS Lambda and Amazon Comprehend for sentiment analysis

Post Syndicated from Chris Munns original https://aws.amazon.com/blogs/compute/using-aws-lambda-and-amazon-comprehend-for-sentiment-analysis/

This post courtesy of Giedrius Praspaliauskas, AWS Solutions Architect

Even with best IVR systems, customers get frustrated. What if you knew that 10 callers in your Amazon Connect contact flow were likely to say “Agent!” in frustration in the next 30 seconds? Would you like to get to them before that happens? What if your bot was smart enough to admit, “I’m sorry this isn’t helping. Let me find someone for you.”?

In this post, I show you how to use AWS Lambda and Amazon Comprehend for sentiment analysis to make your Amazon Lex bots in Amazon Connect more sympathetic.

Setting up a Lambda function for sentiment analysis

There are multiple natural language and text processing frameworks or services available to use with Lambda, including but not limited to Amazon Comprehend, TextBlob, Pattern, and NLTK. Pick one based on the nature of your system:  the type of interaction, languages supported, and so on. For this post, I picked Amazon Comprehend, which uses natural language processing (NLP) to extract insights and relationships in text.

The walkthrough in this post is just an example. In a full-scale implementation, you would likely implement a more nuanced approach. For example, you could keep the overall sentiment score through the conversation and act only when it reaches a certain threshold. It is worth noting that this Lambda function is not called for missed utterances, so there may be a gap between what is being analyzed and what was actually said.

The Lambda function is straightforward. It analyses the input transcript field of the Amazon Lex event. Based on the overall sentiment value, it generates a response message with next step instructions. When the sentiment is neutral, positive, or mixed, the response leaves it to Amazon Lex to decide what the next steps should be. It adds to the response overall sentiment value as an additional session attribute, along with slots’ values received as an input.

When the overall sentiment is negative, the function returns the dialog action, pointing to an escalation intent (specified in the environment variable ESCALATION_INTENT_NAME) or returns the fulfillment closure action with a failure state when the intent is not specified. In addition to actions or intents, the function returns a message, or prompt, to be provided to the customer before taking the next step. Based on the returned action, Amazon Connect can select the appropriate next step in a contact flow.

For this walkthrough, you create a Lambda function using the AWS Management Console:

  1. Open the Lambda console.
  2. Choose Create Function.
  3. Choose Author from scratch (no blueprint).
  4. For Runtime, choose Python 3.6.
  5. For Role, choose Create a custom role. The custom execution role allows the function to detect sentiments, create a log group, stream log events, and store the log events.
  6. Enter the following values:
    • For Role Description, enter Lambda execution role permissions.
    • For IAM Role, choose Create an IAM role.
    • For Role Name, enter LexSentimentAnalysisLambdaRole.
    • For Policy, use the following policy:
    "Version": "2012-10-17",
    "Statement": [
            "Effect": "Allow",
            "Action": [
            "Resource": "arn:aws:logs:*:*:*"
            "Action": [
            "Effect": "Allow",
            "Resource": "*"
    1. Choose Create function.
    2. Copy/paste the following code to the editor window
import os, boto3

ESCALATION_INTENT_MESSAGE="Seems that you are having troubles with our service. Would you like to be transferred to the associate?"
FULFILMENT_CLOSURE_MESSAGE="Seems that you are having troubles with our service. Let me transfer you to the associate."

escalation_intent_name = os.getenv('ESACALATION_INTENT_NAME', None)

client = boto3.client('comprehend')

def lambda_handler(event, context):
    if sentiment=='NEGATIVE':
        if escalation_intent_name:
            result = {
                "sessionAttributes": {
                    "sentiment": sentiment
                    "dialogAction": {
                        "type": "ConfirmIntent", 
                        "message": {
                            "contentType": "PlainText", 
                            "content": ESCALATION_INTENT_MESSAGE
                    "intentName": escalation_intent_name
            result = {
                "sessionAttributes": {
                    "sentiment": sentiment
                "dialogAction": {
                    "type": "Close",
                    "fulfillmentState": "Failed",
                    "message": {
                            "contentType": "PlainText",
                            "content": FULFILMENT_CLOSURE_MESSAGE

        result ={
            "sessionAttributes": {
                "sentiment": sentiment
            "dialogAction": {
                "type": "Delegate",
                "slots" : event["currentIntent"]["slots"]
    return result
  1. Below the code editor specify the environment variable ESCALATION_INTENT_NAME with a value of Escalate.

  1. Click on Save in the top right of the console.

Now you can test your function.

  1. Click Test at the top of the console.
  2. Configure a new test event using the following test event JSON:
  "messageVersion": "1.0",
  "invocationSource": "DialogCodeHook",
  "userId": "1234567890",
  "sessionAttributes": {},
  "bot": {
    "name": "BookSomething",
    "alias": "None",
    "version": "$LATEST"
  "outputDialogMode": "Text",
  "currentIntent": {
    "name": "BookSomething",
    "slots": {
      "slot1": "None",
      "slot2": "None"
    "confirmationStatus": "None"
  "inputTranscript": "I want something"
  1. Click Create
  2. Click Test on the console

This message should return a response from Lambda with a sentiment session attribute of NEUTRAL.

However, if you change the input to “This is garbage!”, Lambda changes the dialog action to the escalation intent specified in the environment variable ESCALATION_INTENT_NAME.

Setting up Amazon Lex

Now that you have your Lambda function running, it is time to create the Amazon Lex bot. Use the BookTrip sample bot and call it BookSomething. The IAM role is automatically created on your behalf. Indicate that this bot is not subject to the COPPA, and choose Create. A few minutes later, the bot is ready.

Make the following changes to the default configuration of the bot:

  1. Add an intent with no associated slots. Name it Escalate.
  2. Specify the Lambda function for initialization and validation in the existing two intents (“BookCar” and “BookHotel”), at the same time giving Amazon Lex permission to invoke it.
  3. Leave the other configuration settings as they are and save the intents.

You are ready to build and publish this bot. Set a new alias, BookSomethingWithSentimentAnalysis. When the build finishes, test it.

As you see, sentiment analysis works!

Setting up Amazon Connect

Next, provision an Amazon Connect instance.

After the instance is created, you need to integrate the Amazon Lex bot created in the previous step. For more information, see the Amazon Lex section in the Configuring Your Amazon Connect Instance topic.  You may also want to look at the excellent post by Randall Hunt, New – Amazon Connect and Amazon Lex Integration.

Create a new contact flow, “Sentiment analysis walkthrough”:

  1. Log in into the Amazon Connect instance.
  2. Choose Create contact flow, Create transfer to agent flow.
  3. Add a Get customer input block, open the icon in the top left corner, and specify your Amazon Lex bot and its intents.
  4. Select the Text to speech audio prompt type and enter text for Amazon Connect to play at the beginning of the dialog.
  5. Choose Amazon Lex, enter your Amazon Lex bot name and the alias.
  6. Specify the intents to be used as dialog branches that a customer can choose: BookHotel, BookTrip, or Escalate.
  7. Add two Play prompt blocks and connect them to the customer input block.
    • If booking hotel or car intent is returned from the bot flow, play the corresponding prompt (“OK, will book it for you”) and initiate booking (in this walkthrough, just hang up after the prompt).
    • However, if escalation intent is returned (caused by the sentiment analysis results in the bot), play the prompt (“OK, transferring to an agent”) and initiate the transfer.
  8. Save and publish the contact flow.

As a result, you have a contact flow with a single customer input step and a text-to-speech prompt that uses the Amazon Lex bot. You expect one of the three intents returned:

Edit the phone number to associate the contact flow that you just created. It is now ready for testing. Call the phone number and check how your contact flow works.


Don’t forget to delete all the resources created during this walkthrough to avoid incurring any more costs:

  • Amazon Connect instance
  • Amazon Lex bot
  • Lambda function
  • IAM role LexSentimentAnalysisLambdaRole


In this walkthrough, you implemented sentiment analysis with a Lambda function. The function can be integrated into Amazon Lex and, as a result, into Amazon Connect. This approach gives you the flexibility to analyze user input and then act. You may find the following potential use cases of this approach to be of interest:

  • Extend the Lambda function to identify “hot” topics in the user input even if the sentiment is not negative and take action proactively. For example, switch to an escalation intent if a user mentioned “where is my order,” which may signal potential frustration.
  • Use Amazon Connect Streams to provide agent sentiment analysis results along with call transfer. Enable service tailored towards particular customer needs and sentiments.
  • Route calls to agents based on both skill set and sentiment.
  • Prioritize calls based on sentiment using multiple Amazon Connect queues instead of transferring directly to an agent.
  • Monitor quality and flag for review contact flows that result in high overall negative sentiment.
  • Implement sentiment and AI/ML based call analysis, such as a real-time recommendation engine. For more details, see Machine Learning on AWS.

If you have questions or suggestions, please comment below.

More power to your Pi

Post Syndicated from James Adams original https://www.raspberrypi.org/blog/pi-power-supply-chip/

It’s been just over three weeks since we launched the new Raspberry Pi 3 Model B+. Although the product is branded Raspberry Pi 3B+ and not Raspberry Pi 4, a serious amount of engineering was involved in creating it. The wireless networking, USB/Ethernet hub, on-board power supplies, and BCM2837 chip were all upgraded: together these represent almost all the circuitry on the board! Today, I’d like to tell you about the work that has gone into creating a custom power supply chip for our newest computer.

Raspberry Pi 3 Model B+, with custome power supply chip

The new Raspberry Pi 3B+, sporting a new, custom power supply chip (bottom left-hand corner)

Successful launch

The Raspberry Pi 3B+ has been well received, and we’ve enjoyed hearing feedback from the community as well as reading the various reviews and articles highlighting the solid improvements in wireless networking, Ethernet, CPU, and thermal performance of the new board. Gareth Halfacree’s post here has some particularly nice graphs showing the increased performance as well as how the Pi 3B+ keeps cool under load due to the new CPU package that incorporates a metal heat spreader. The Raspberry Pi production lines at the Sony UK Technology Centre are running at full speed, and it seems most people who want to get hold of the new board are able to find one in stock.

Powering your Pi

One of the most critical but often under-appreciated elements of any electronic product, particularly one such as Raspberry Pi with lots of complex on-board silicon (processor, networking, high-speed memory), is the power supply. In fact, the Raspberry Pi 3B+ has no fewer than six different voltage rails: two at 3.3V — one special ‘quiet’ one for audio, and one for everything else; 1.8V; 1.2V for the LPDDR2 memory; and 1.2V nominal for the CPU core. Note that the CPU voltage is actually raised and lowered on the fly as the speed of the CPU is increased and decreased depending on how hard the it is working. The sixth rail is 5V, which is the master supply that all the others are created from, and the output voltage for the four downstream USB ports; this is what the mains power adaptor is supplying through the micro USB power connector.

Power supply primer

There are two common classes of power supply circuits: linear regulators and switching regulators. Linear regulators work by creating a lower, regulated voltage from a higher one. In simple terms, they monitor the output voltage against an internally generated reference and continually change their own resistance to keep the output voltage constant. Switching regulators work in a different way: they ‘pump’ energy by first storing the energy coming from the source supply in a reactive component (usually an inductor, sometimes a capacitor) and then releasing it to the regulated output supply. The switches in switching regulators effect this energy transfer by first connecting the inductor (or capacitor) to store the source energy, and then switching the circuit so the energy is released to its destination.

Linear regulators produce smoother, less noisy output voltages, but they can only convert to a lower voltage, and have to dissipate energy to do so. The higher the output current and the voltage difference across them is, the more energy is lost as heat. On the other hand, switching supplies can, depending on their design, convert any voltage to any other voltage and can be much more efficient (efficiencies of 90% and above are not uncommon). However, they are more complex and generate noisier output voltages.

Designers use both types of regulators depending on the needs of the downstream circuit: for low-voltage drops, low current, or low noise, linear regulators are usually the right choice, while switching regulators are used for higher power or when efficiency of conversion is required. One of the simplest switching-mode power supply circuits is the buck converter, used to create a lower voltage from a higher one, and this is what we use on the Pi.

A history lesson

The BCM2835 processor chip (found on the original Raspberry Pi Model B and B+, as well as on the Zero products) has on-chip power supplies: one switch-mode regulator for the core voltage, as well as a linear one for the LPDDR2 memory supply. This meant that in addition to 5V, we only had to provide 3.3V and 1.8V on the board, which was relatively simple to do using cheap, off-the-shelf parts.

Pi Zero sporting a BCM2835 processor which only needs 2 external switchers (the components clustered behind the camera port)

When we moved to the BCM2836 for Raspberry Pi Model 2 (and subsequently to the BCM2837A1 and B0 for Raspberry Pi 3B and 3B+), the core supply and the on-chip LPDDR2 memory supply were not up to the job of supplying the extra processor cores and larger memory, so we removed them. (We also used the recovered chip area to help fit in the new quad-core ARM processors.) The upshot of this was that we had to supply these power rails externally for the Raspberry Pi 2 and models thereafter. Moreover, we also had to provide circuitry to sequence them correctly in order to control exactly when they power up compared to the other supplies on the board.

Power supply design is tricky (but critical)

Raspberry Pi boards take in 5V from the micro USB socket and have to generate the other required supplies from this. When 5V is first connected, each of these other supplies must ‘start up’, meaning go from ‘off’, or 0V, to their correct voltage in some short period of time. The order of the supplies starting up is often important: commonly, there are structures inside a chip that form diodes between supply rails, and bringing supplies up in the wrong order can sometimes ‘turn on’ these diodes, causing them to conduct, with undesirable consequences. Silicon chips come with a data sheet specifying what supplies (voltages and currents) are needed and whether they need to be low-noise, in what order they must power up (and in some cases down), and sometimes even the rate at which the voltages must power up and down.

A Pi3. Power supply components are clustered bottom left next to the micro USB, middle (above LPDDR2 chip which is on the bottom of the PCB) and above the A/V jack.

In designing the power chain for the Pi 2 and 3, the sequencing was fairly straightforward: power rails power up in order of voltage (5V, 3.3V, 1.8V, 1.2V). However, the supplies were all generated with individual, discrete devices. Therefore, I spent quite a lot of time designing circuitry to control the sequencing — even with some design tricks to reduce component count, quite a few sequencing components are required. More complex systems generally use a Power Management Integrated Circuit (PMIC) with multiple supplies on a single chip, and many different PMIC variants are made by various manufacturers. Since Raspberry Pi 2 days, I was looking for a suitable PMIC to simplify the Pi design, but invariably (and somewhat counter-intuitively) these were always too expensive compared to my discrete solution, usually because they came with more features than needed.

One device to rule them all

It was way back in May 2015 when I first chatted to Peter Coyle of Exar (Exar were bought by MaxLinear in 2017) about power supply products for Raspberry Pi. We didn’t find a product match then, but in June 2016 Peter, along with Tuomas Hollman and Trevor Latham, visited to pitch the possibility of building a custom power management solution for us.

I was initially sceptical that it could be made cheap enough. However, our discussion indicated that if we could tailor the solution to just what we needed, it could be cost-effective. Over the coming weeks and months, we honed a specification we agreed on from the initial sketches we’d made, and Exar thought they could build it for us at the target price.

The chip we designed would contain all the key supplies required for the Pi on one small device in a cheap QFN package, and it would also perform the required sequencing and voltage monitoring. Moreover, the chip would be flexible to allow adjustment of supply voltages from their default values via I2C; the largest supply would be capable of being adjusted quickly to perform the dynamic core voltage changes needed in order to reduce voltage to the processor when it is idling (to save power), and to boost voltage to the processor when running at maximum speed (1.4 GHz). The supplies on the chip would all be generously specified and could deliver significantly more power than those used on the Raspberry Pi 3. All in all, the chip would contain four switching-mode converters and one low-current linear regulator, this last one being low-noise for the audio circuitry.

The MXL7704 chip

The project was a great success: MaxLinear delivered working samples of first silicon at the end of May 2017 (almost exactly a year after we had kicked off the project), and followed through with production quantities in December 2017 in time for the Raspberry Pi 3B+ production ramp.

The team behind the power supply chip on the Raspberry Pi 3 Model B+ (group of six men, two of whom are holding Raspberry Pi boards)

Front row: Roger with the very first Pi 3B+ prototypes and James with a MXL7704 development board hacked to power a Pi 3. Back row left to right: Will Torgerson, Trevor Latham, Peter Coyle, Tuomas Hollman.

The MXL7704 device has been key to reducing Pi board complexity and therefore overall bill of materials cost. Furthermore, by being able to deliver more power when needed, it has also been essential to increasing the speed of the (newly packaged) BCM2837B0 processor on the 3B+ to 1.4GHz. The result is improvements to both the continuous output current to the CPU (from 3A to 4A) and to the transient performance (i.e. the chip has helped to reduce the ‘transient response’, which is the change in supply voltage due to a sudden current spike that occurs when the processor suddenly demands a large current in a few nanoseconds, as modern CPUs tend to do).

With the MXL7704, the power supply circuitry on the 3B+ is now a lot simpler than the Pi 3B design. This new supply also provides the LPDDR2 memory voltage directly from a switching regulator rather than using linear regulators like the Pi 3, thereby improving energy efficiency. This helps to somewhat offset the extra power that the faster Ethernet, wireless networking, and processor consume. A pleasing side effect of using the new chip is the symmetric board layout of the regulators — it’s easy to see the four switching-mode supplies, given away by four similar-looking blobs (three grey and one brownish), which are the inductors.

Close-up of the power supply chip on the Raspberry Pi 3 Model B+

The Pi 3B+ PMIC MXL7704 — pleasingly symmetric


It takes a lot of effort to design a new chip from scratch and get it all the way through to production — we are very grateful to the team at MaxLinear for their hard work, dedication, and enthusiasm. We’re also proud to have created something that will not only power Raspberry Pis, but will also be useful for other product designs: it turns out when you have a low-cost and flexible device, it can be used for many things — something we’re fairly familiar with here at Raspberry Pi! For the curious, the product page (including the data sheet) for the MXL7704 chip is here. Particular thanks go to Peter Coyle, Tuomas Hollman, and Trevor Latham, and also to Jon Cronk, who has been our contact in the US and has had to get up early to attend all our conference calls!

The MXL7704 design team celebrating on Pi Day — it takes a lot of people to design a chip!

I hope you liked reading about some of the effort that has gone into creating the new Pi. It’s nice to finally have a chance to tell people about some of the (increasingly complex) technical work that makes building a $35 computer possible — we’re very pleased with the Raspberry Pi 3B+, and we hope you enjoy using it as much as we’ve enjoyed creating it!

The post More power to your Pi appeared first on Raspberry Pi.

MPA Reveals Scale of Worldwide Pirate Site Blocking

Post Syndicated from Andy original https://torrentfreak.com/mpa-reveals-scale-of-worldwide-pirate-site-blocking-180410/

Few people following the controversial topic of Internet piracy will be unaware of the site-blocking phenomenon. It’s now one of the main weapons in the entertainment industries’ arsenal and it’s affecting dozens of countries.

While general figures can be culled from the hundreds of news reports covering the issue, the manner in which blocking is handled in several regions means that updates aren’t always provided. New sites are regularly added to blocklists without fanfare, meaning that the public is kept largely in the dark.

Now, however, a submission to the Canadian Radio-television and Telecommunications Commission (CRTC) by Motion Picture Association Canada provides a more detailed overview. It was presented in support of the proposed blocking regime in Canada, so while the key figures are no doubt accurate, some of the supporting rhetoric should be viewed in context.

“Over the last decade, at least 42 countries have either adopted and implemented, or are legally obligated to adopt and implement, measures to ensure that ISPs take steps to disable access to copyright infringing websites, including throughout the European Union, the United Kingdom, Australia, and South Korea,” the submission reads.

The 42 blocking-capable countries referenced by the Hollywood group include the members of the European Union plus the following: Argentina, Australia, Iceland, India, Israel, Liechtenstein, Malaysia, Mexico, Norway, Russia, Singapore, South Korea, and Thailand.

While all countries have their own unique sets of legislation, countries within the EU are covered by the requirements of Article 8.3 of the INFOSEC Directive which provides that; “Member States shall ensure that rightholders are in a position to apply for an injunction against intermediaries whose services are used by a third party to infringe a copyright or related right.”

That doesn’t mean that all countries are actively blocking, however. While Bulgaria, Croatia, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Poland, Romania, Slovakia, and Slovenia have the legal basis to block infringing sites, none have yet done so.

In a significant number of other EU countries, however, blocking activity is prolific.

“To date, in at least 17 European countries, over 1,800 infringing sites and over 5,300 domains utilized by such sites have been blocked, including in the following four countries where the positive impact of site-blocking over time has been demonstrated,” MPA Canada notes.

Major blocking nations in the EU

At this point, it’s worth pointing out that authority to block sites is currently being obtained in two key ways, either through the courts or via an administrative process.

In the examples above, the UK and Denmark are dealt with via the former, with Italy and Portugal handled via the latter. At least as far as the volume of sites is concerned, court processes – which can be expensive – tend to yield lower site blocking levels than those carried out through an administrative process. Indeed, the MPAA has praised Portugal’s super-streamlined efforts as something to aspire to.

Outside Europe, the same two processes are also in use. For example, Australia, Argentina, and Singapore utilize the judicial route while South Korea, Mexico, Malaysia and Indonesia have opted for administrative remedies.

“Across 10 of these countries, over 1,100 infringing sites and over 1,500 domains utilized by such sites have been blocked,” MPA Canada reveals.

To date, South Korea has blocked 460 sites and 547 domains, while Australia has blocked 91 sites and 355 domains. In the case of the latter, “research has confirmed the increasingly positive impact that site-blocking has, as a greater number of sites are blocked over time,” the Hollywood group notes.

Although by no means comprehensive, MPA Canada lists the following “Notorious Sites” as subject to blocking in multiple countries via both judicial and administrative means. Most will be familiar, with the truly notorious The Pirate Bay heading the pile. Several no longer exist in their original form but in many cases, clones are blocked as if they still represent the original target.

The methods used to block the sites vary from country to country, dependent on what courts deem fit and in consideration of ISPs’ technical capabilities. Three main tools are in use including DNS blocking, IP address blocking, and URL blocking, which can also include Deep Packet Inspection.

The MPA submission (pdf) is strongly in favor of adding Canada to the list of site-blocking countries detailed above. The Hollywood group believes that the measures are both effective and proportionate, citing reduced usage of blocked sites, reduced traffic to pirate sites in general, and increased visits to legitimate platforms.

“There is every reason to believe that the website blocking measures [presented to the CRTC] will lead to the same beneficial results in Canada,” MPA Canada states.

While plenty of content creators and distributors are in favor of proposals, all signs suggest they will have a battle on their hands, with even some ISPs coming out in opposition.

Source: TF, for the latest info on copyright, file-sharing, torrent sites and more. We also have VPN reviews, discounts, offers and coupons.

Linux kernel lockdown and UEFI Secure Boot

Post Syndicated from Matthew Garrett original https://mjg59.dreamwidth.org/50577.html

David Howells recently published the latest version of his kernel lockdown patchset. This is intended to strengthen the boundary between root and the kernel by imposing additional restrictions that prevent root from modifying the kernel at runtime. It’s not the first feature of this sort – /dev/mem no longer allows you to overwrite arbitrary kernel memory, and you can configure the kernel so only signed modules can be loaded. But the present state of things is that these security features can be easily circumvented (by using kexec to modify the kernel security policy, for instance).

Why do you want lockdown? If you’ve got a setup where you know that your system is booting a trustworthy kernel (you’re running a system that does cryptographic verification of its boot chain, or you built and installed the kernel yourself, for instance) then you can trust the kernel to keep secrets safe from even root. But if root is able to modify the running kernel, that guarantee goes away. As a result, it makes sense to extend the security policy from the boot environment up to the running kernel – it’s really just an extension of configuring the kernel to require signed modules.

The patchset itself isn’t hugely conceptually controversial, although there’s disagreement over the precise form of certain restrictions. But one patch has, because it associates whether or not lockdown is enabled with whether or not UEFI Secure Boot is enabled. There’s some backstory that’s important here.

Most kernel features get turned on or off by either build-time configuration or by passing arguments to the kernel at boot time. There’s two ways that this patchset allows a bootloader to tell the kernel to enable lockdown mode – it can either pass the lockdown argument on the kernel command line, or it can set the secure_boot flag in the bootparams structure that’s passed to the kernel. If you’re running in an environment where you’re able to verify the kernel before booting it (either through cryptographic validation of the kernel, or knowing that there’s a secret tied to the TPM that will prevent the system booting if the kernel’s been tampered with), you can turn on lockdown.

There’s a catch on UEFI systems, though – you can build the kernel so that it looks like an EFI executable, and then run it directly from the firmware. The firmware doesn’t know about Linux, so can’t populate the bootparam structure, and there’s no mechanism to enforce command lines so we can’t rely on that either. The controversial patch simply adds a kernel configuration option that automatically enables lockdown when UEFI secure boot is enabled and otherwise leaves it up to the user to choose whether or not to turn it on.

Why do we want lockdown enabled when booting via UEFI secure boot? UEFI secure boot is designed to prevent the booting of any bootloaders that the owner of the system doesn’t consider trustworthy[1]. But a bootloader is only software – the only thing that distinguishes it from, say, Firefox is that Firefox is running in user mode and has no direct access to the hardware. The kernel does have direct access to the hardware, and so there’s no meaningful distinction between what grub can do and what the kernel can do. If you can run arbitrary code in the kernel then you can use the kernel to boot anything you want, which defeats the point of UEFI Secure Boot. Linux distributions don’t want their kernels to be used to be used as part of an attack chain against other distributions or operating systems, so they enable lockdown (or equivalent functionality) for kernels booted this way.

So why not enable it everywhere? There’s a couple of reasons. The first is that some of the features may break things people need – for instance, some strange embedded apps communicate with PCI devices by mmap()ing resources directly from sysfs[2]. This is blocked by lockdown, which would break them. Distributions would then have to ship an additional kernel that had lockdown disabled (it’s not possible to just have a command line argument that disables it, because an attacker could simply pass that), and users would have to disable secure boot to boot that anyway. It’s easier to just tie the two together.

The second is that it presents a promise of security that isn’t really there if your system didn’t verify the kernel. If an attacker can replace your bootloader or kernel then the ability to modify your kernel at runtime is less interesting – they can just wait for the next reboot. Appearing to give users safety assurances that are much less strong than they seem to be isn’t good for keeping users safe.

So, what about people whose work is impacted by lockdown? Right now there’s two ways to get stuff blocked by lockdown unblocked: either disable secure boot[3] (which will disable it until you enable secure boot again) or press alt-sysrq-x (which will disable it until the next boot). Discussion has suggested that having an additional secure variable that disables lockdown without disabling secure boot validation might be helpful, and it’s not difficult to implement that so it’ll probably happen.

Overall: the patchset isn’t controversial, just the way it’s integrated with UEFI secure boot. The reason it’s integrated with UEFI secure boot is because that’s the policy most distributions want, since the alternative is to enable it everywhere even when it doesn’t provide real benefits but does provide additional support overhead. You can use it even if you’re not using UEFI secure boot. We should have just called it securelevel.

[1] Of course, if the owner of a system isn’t allowed to make that determination themselves, the same technology is restricting the freedom of the user. This is abhorrent, and sadly it’s the default situation in many devices outside the PC ecosystem – most of them not using UEFI. But almost any security solution that aims to prevent malicious software from running can also be used to prevent any software from running, and the problem here is the people unwilling to provide that policy to users rather than the security features.
[2] This is how X.org used to work until the advent of kernel modesetting
[3] If your vendor doesn’t provide a firmware option for this, run sudo mokutil –disable-validation

comment count unavailable comments

AWS Secrets Manager: Store, Distribute, and Rotate Credentials Securely

Post Syndicated from Randall Hunt original https://aws.amazon.com/blogs/aws/aws-secrets-manager-store-distribute-and-rotate-credentials-securely/

Today we’re launching AWS Secrets Manager which makes it easy to store and retrieve your secrets via API or the AWS Command Line Interface (CLI) and rotate your credentials with built-in or custom AWS Lambda functions. Managing application secrets like database credentials, passwords, or API Keys is easy when you’re working locally with one machine and one application. As you grow and scale to many distributed microservices, it becomes a daunting task to securely store, distribute, rotate, and consume secrets. Previously, customers needed to provision and maintain additional infrastructure solely for secrets management which could incur costs and introduce unneeded complexity into systems.

AWS Secrets Manager

Imagine that I have an application that takes incoming tweets from Twitter and stores them in an Amazon Aurora database. Previously, I would have had to request a username and password from my database administrator and embed those credentials in environment variables or, in my race to production, even in the application itself. I would also need to have our social media manager create the Twitter API credentials and figure out how to store those. This is a fairly manual process, involving multiple people, that I have to restart every time I want to rotate these credentials. With Secrets Manager my database administrator can provide the credentials in secrets manager once and subsequently rely on a Secrets Manager provided Lambda function to automatically update and rotate those credentials. My social media manager can put the Twitter API keys in Secrets Manager which I can then access with a simple API call and I can even rotate these programmatically with a custom lambda function calling out to the Twitter API. My secrets are encrypted with the KMS key of my choice, and each of these administrators can explicitly grant access to these secrets with with granular IAM policies for individual roles or users.

Let’s take a look at how I would store a secret using the AWS Secrets Manager console. First, I’ll click Store a new secret to get to the new secrets wizard. For my RDS Aurora instance it’s straightforward to simply select the instance and provide the initial username and password to connect to the database.

Next, I’ll fill in a quick description and a name to access my secret by. You can use whatever naming scheme you want here.

Next, we’ll configure rotation to use the Secrets Manager-provided Lambda function to rotate our password every 10 days.

Finally, we’ll review all the details and check out our sample code for storing and retrieving our secret!

Finally I can review the secrets in the console.

Now, if I needed to access these secrets I’d simply call the API.

import json
import boto3
secrets = boto3.client("secretsmanager")
rds = json.dumps(secrets.get_secrets_value("prod/TwitterApp/Database")['SecretString'])

Which would give me the following values:

{'engine': 'mysql',
 'host': 'twitterapp2.abcdefg.us-east-1.rds.amazonaws.com',
 'password': '-)Kw>THISISAFAKEPASSWORD:lg{&sad+Canr',
 'port': 3306,
 'username': 'ranman'}

More than passwords

AWS Secrets Manager works for more than just passwords. I can store OAuth credentials, binary data, and more. Let’s look at storing my Twitter OAuth application keys.

Now, I can define the rotation for these third-party OAuth credentials with a custom AWS Lambda function that can call out to Twitter whenever we need to rotate our credentials.

Custom Rotation

One of the niftiest features of AWS Secrets Manager is custom AWS Lambda functions for credential rotation. This allows you to define completely custom workflows for credentials. Secrets Manager will call your lambda with a payload that includes a Step which specifies which step of the rotation you’re in, a SecretId which specifies which secret the rotation is for, and importantly a ClientRequestToken which is used to ensure idempotency in any changes to the underlying secret.

When you’re rotating secrets you go through a few different steps:

  1. createSecret
  2. setSecret
  3. testSecret
  4. finishSecret

The advantage of these steps is that you can add any kind of approval steps you want for each phase of the rotation. For more details on custom rotation check out the documentation.

Available Now
AWS Secrets Manager is available today in US East (N. Virginia), US East (Ohio), US West (N. California), US West (Oregon), Asia Pacific (Mumbai), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Tokyo), Canada (Central), EU (Frankfurt), EU (Ireland), EU (London), and South America (São Paulo). Secrets are priced at $0.40 per month per secret and $0.05 per 10,000 API calls. I’m looking forward to seeing more users adopt rotating credentials to secure their applications!


Engineering deep dive: Encoding of SCTs in certificates

Post Syndicated from Let's Encrypt - Free SSL/TLS Certificates original https://letsencrypt.org/2018/04/04/sct-encoding.html

<p>Let&rsquo;s Encrypt recently <a href="https://community.letsencrypt.org/t/signed-certificate-timestamps-embedded-in-certificates/57187">launched SCT embedding in
This feature allows browsers to check that a certificate was submitted to a
<a href="https://en.wikipedia.org/wiki/Certificate_Transparency">Certificate Transparency</a>
log. As part of the launch, we did a thorough review
that the encoding of Signed Certificate Timestamps (SCTs) in our certificates
matches the relevant specifications. In this post, I&rsquo;ll dive into the details.
You&rsquo;ll learn more about X.509, ASN.1, DER, and TLS encoding, with references to
the relevant RFCs.</p>

<p>Certificate Transparency offers three ways to deliver SCTs to a browser: In a
TLS extension, in stapled OCSP, or embedded in a certificate. We chose to
implement the embedding method because it would just work for Let&rsquo;s Encrypt
subscribers without additional work. In the SCT embedding method, we submit
a &ldquo;precertificate&rdquo; with a <a href="#poison">poison extension</a> to a set of
CT logs, and get back SCTs. We then issue a real certificate based on the
precertificate, with two changes: The poison extension is removed, and the SCTs
obtained earlier are added in another extension.</p>

<p>Given a certificate, let&rsquo;s first look for the SCT list extension. According to CT (<a href="https://tools.ietf.org/html/rfc6962#section-3.3">RFC 6962
section 3.3</a>),
the extension OID for a list of SCTs is <code></code>. An <a href="http://www.hl7.org/Oid/information.cfm">OID (object
ID)</a> is a series of integers, hierarchically
assigned and globally unique. They are used extensively in X.509, for instance
to uniquely identify extensions.</p>

<p>We can <a href="https://acme-v01.api.letsencrypt.org/acme/cert/031f2484307c9bc511b3123cb236a480d451">download an example certificate</a>,
and view it using OpenSSL (if your OpenSSL is old, it may not display the
detailed information):</p>

<pre><code>$ openssl x509 -noout -text -inform der -in Downloads/031f2484307c9bc511b3123cb236a480d451

CT Precertificate SCTs:
Signed Certificate Timestamp:
Version : v1(0)
Log ID : DB:74:AF:EE:CB:29:EC:B1:FE:CA:3E:71:6D:2C:E5:B9:
Timestamp : Mar 29 18:45:07.993 2018 GMT
Extensions: none
Signature : ecdsa-with-SHA256
Signed Certificate Timestamp:
Version : v1(0)
Log ID : 29:3C:51:96:54:C8:39:65:BA:AA:50:FC:58:07:D4:B7:
Timestamp : Mar 29 18:45:08.010 2018 GMT
Extensions: none
Signature : ecdsa-with-SHA256

<p>Now let&rsquo;s go a little deeper. How is that extension represented in
the certificate? Certificates are expressed in
<a href="https://en.wikipedia.org/wiki/Abstract_Syntax_Notation_One">ASN.1</a>,
which generally refers to both a language for expressing data structures
and a set of formats for encoding them. The most common format,
<a href="https://en.wikipedia.org/wiki/X.690#DER_encoding">DER</a>,
is a tag-length-value format. That is, to encode an object, first you write
down a tag representing its type (usually one byte), then you write
down a number expressing how long the object is, then you write down
the object contents. This is recursive: An object can contain multiple
objects within it, each of which has its own tag, length, and value.</p>

<p>One of the cool things about DER and other tag-length-value formats is that you
can decode them to some degree without knowing what they mean. For instance, I
can tell you that 0x30 means the data type &ldquo;SEQUENCE&rdquo; (a struct, in ASN.1
terms), and 0x02 means &ldquo;INTEGER&rdquo;, then give you this hex byte sequence to

<pre><code>30 06 02 01 03 02 01 0A

<p>You could tell me right away that decodes to:</p>


<p>Try it yourself with this great <a href="https://lapo.it/asn1js/#300602010302010A">JavaScript ASN.1
decoder</a>. However, you wouldn&rsquo;t know
what those integers represent without the corresponding ASN.1 schema (or
&ldquo;module&rdquo;). For instance, if you knew that this was a piece of DogData, and the
schema was:</p>

<pre><code>DogData ::= SEQUENCE {
cutenessLevel INTEGER

<p>You&rsquo;d know this referred to a three-legged dog with a cuteness level of 10.</p>

<p>We can take some of this knowledge and apply it to our certificates. As a first
step, convert the above certificate to hex with
<code>xxd -ps &lt; Downloads/031f2484307c9bc511b3123cb236a480d451</code>. You can then copy
and paste the result into
<a href="https://lapo.it/asn1js">lapo.it/asn1js</a> (or use <a href="https://lapo.it/asn1js/#3082062F30820517A0030201020212031F2484307C9BC511B3123CB236A480D451300D06092A864886F70D01010B0500304A310B300906035504061302555331163014060355040A130D4C6574277320456E6372797074312330210603550403131A4C6574277320456E637279707420417574686F72697479205833301E170D3138303332393137343530375A170D3138303632373137343530375A302D312B3029060355040313223563396137662E6C652D746573742E686F66666D616E2D616E64726577732E636F6D30820122300D06092A864886F70D01010105000382010F003082010A0282010100BCEAE8F504D9D91FCFC69DB943254A7FED7C6A3C04E2D5C7DDD010CBBC555887274489CA4F432DCE6D7AB83D0D7BDB49C466FBCA93102DC63E0EB1FB2A0C50654FD90B81A6CB357F58E26E50F752BF7BFE9B56190126A47409814F59583BDD337DFB89283BE22E81E6DCE13B4E21FA6009FC8A7F903A17AB05C8BED85A715356837E849E571960A8999701EAE9CE0544EAAB936B790C3C35C375DB18E9AA627D5FA3579A0FB5F8079E4A5C9BE31C2B91A7F3A63AFDFEDB9BD4EA6668902417D286BE4BBE5E43CD9FE1B8954C06F21F5C5594FD3AB7D7A9CBD6ABF19774D652FD35C5718C25A3BA1967846CED70CDBA95831CF1E09FF7B8014E63030CE7A776750203010001A382032A30820326300E0603551D0F0101FF0404030205A0301D0603551D250416301406082B0601050507030106082B06010505070302300C0603551D130101FF04023000301D0603551D0E041604148B3A21ABADF50C4B30DCCD822724D2C4B9BA29E3301F0603551D23041830168014A84A6A63047DDDBAE6D139B7A64565EFF3A8ECA1306F06082B0601050507010104633061302E06082B060105050730018622687474703A2F2F6F6373702E696E742D78332E6C657473656E63727970742E6F7267302F06082B060105050730028623687474703A2F2F636572742E696E742D78332E6C657473656E63727970742E6F72672F302D0603551D110426302482223563396137662E6C652D746573742E686F66666D616E2D616E64726577732E636F6D3081FE0603551D200481F63081F33008060667810C0102013081E6060B2B0601040182DF130101013081D6302606082B06010505070201161A687474703A2F2F6370732E6C657473656E63727970742E6F72673081AB06082B0601050507020230819E0C819B54686973204365727469666963617465206D6179206F6E6C792062652072656C6965642075706F6E2062792052656C79696E67205061727469657320616E64206F6E6C7920696E206163636F7264616E636520776974682074686520436572746966696361746520506F6C69637920666F756E642061742068747470733A2F2F6C657473656E63727970742E6F72672F7265706F7369746F72792F30820104060A2B06010401D6790204020481F50481F200F0007500DB74AFEECB29ECB1FECA3E716D2CE5B9AABB36F7847183C75D9D4F37B61FBF64000001627313EB19000004030046304402207E1FCD1E9A2BD2A50A0C81E713033A0762340DA8F91EF27A48B3817640159CD30220659FE9F1D880E2E8F6B325BE9F18956D17C6CA8A6F2B12CB0F55FB70F759A419007700293C519654C83965BAAA50FC5807D4B76FBF587A2972DCA4C30CF4E54547F478000001627313EB2A0000040300483046022100AB72F1E4D6223EF87FC68491C208D29D4D57EBF47588BB7544D32F9537E2CEC10221008AFFC40CC6C4E3B24578DADE4F815ECBCE2D57A579342119A1E65BC7E5E69CE2300D06092A864886F70D01010B0500038201010095F87B663176776502F792DDD232C216943C7803876FCBEB46393A36354958134482E0AFEED39011618327C2F0203351758FEB420B73CE6C797B98F88076F409F3903F343D1F5D9540F41EF47EB39BD61B62873A44F00B7C8B593C6A416458CF4B5318F35235BC88EABBAA34F3E3F81BD3B047E982EE1363885E84F76F2F079F2B6EEB4ECB58EFE74C8DE7D54DE5C89C4FB5BB0694B837BD6F02BAFD5A6C007D1B93D25007BDA9B2BDBF82201FE1B76B628CE34E2D974E8E623EC57A5CB53B435DD4B9993ADF6BA3972F2B29D259594A94E17BBE06F34AAE5CF0F50297548C4DFFC5566136F78A3D3B324EAE931A14EB6BE6DA1D538E48CF077583C67B52E7E8">this handy link</a>). You can also run <code>openssl asn1parse -i -inform der -in Downloads/031f2484307c9bc511b3123cb236a480d451</code> to use OpenSSL&rsquo;s parser, which is less easy to use in some ways, but easier to copy and paste.</p>

<p>In the decoded data, we can find the OID <code></code>, indicating
the SCT list extension. Per <a href="https://tools.ietf.org/html/rfc5280#page-17">RFC 5280, section
4.1</a>, an extension is defined:</p>

<pre><code>Extension ::= SEQUENCE {
— contains the DER encoding of an ASN.1 value
— corresponding to the extension type identified
— by extnID

<p>We&rsquo;ve found the <code>extnID</code>. The &ldquo;critical&rdquo; field is omitted because it has the
default value (false). Next up is the <code>extnValue</code>. This has the type
<code>OCTET STRING</code>, which has the tag &ldquo;0x04&rdquo;. <code>OCTET STRING</code> means &ldquo;here&rsquo;s
a bunch of bytes!&rdquo; In this case, as described by the spec, those bytes
happen to contain more DER. This is a fairly common pattern in X.509
to deal with parameterized data. For instance, this allows defining a
structure for extensions without knowing ahead of time all the structures
that a future extension might want to carry in its value. If you&rsquo;re a C
programmer, think of it as a <code>void*</code> for data structures. If you prefer Go,
think of it as an <code>interface{}</code>.</p>

<p>Here&rsquo;s that <code>extnValue</code>:</p>

<pre><code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

<p>That&rsquo;s tag &ldquo;0x04&rdquo;, meaning <code>OCTET STRING</code>, followed by &ldquo;0x81 0xF5&rdquo;, meaning
&ldquo;this string is 245 bytes long&rdquo; (the 0x81 prefix is part of <a href="#variable-length">variable length
number encoding</a>).</p>

<p>According to <a href="https://tools.ietf.org/html/rfc6962#section-3.3">RFC 6962, section
3.3</a>, &ldquo;obtained SCTs
can be directly embedded in the final certificate, by encoding the
SignedCertificateTimestampList structure as an ASN.1 <code>OCTET STRING</code>
and inserting the resulting data in the TBSCertificate as an X.509v3
certificate extension&rdquo;</p>

<p>So, we have an <code>OCTET STRING</code>, all&rsquo;s good, right? Except if you remove the
tag and length from extnValue to get its value, you&rsquo;re left with:</p>

<pre><code>04 81 F2 00F0007500DB74AFEEC…

<p>There&rsquo;s that &ldquo;0x04&rdquo; tag again, but with a shorter length. Why
do we nest one <code>OCTET STRING</code> inside another? It&rsquo;s because the
contents of extnValue are required by RFC 5280 to be valid DER, but a
SignedCertificateTimestampList is not encoded using DER (more on that
in a minute). So, by RFC 6962, a SignedCertificateTimestampList is wrapped in an
<code>OCTET STRING</code>, which is wrapped in another <code>OCTET STRING</code> (the extnValue).</p>

<p>Once we decode that second <code>OCTET STRING</code>, we&rsquo;re left with the contents:</p>


<p>&ldquo;0x00&rdquo; isn&rsquo;t a valid tag in DER. What is this? It&rsquo;s TLS encoding. This is
defined in <a href="https://tools.ietf.org/html/rfc5246#section-4">RFC 5246, section 4</a>
(the TLS 1.2 RFC). TLS encoding, like ASN.1, has both a way to define data
structures and a way to encode those structures. TLS encoding differs
from DER in that there are no tags, and lengths are only encoded when necessary for
variable-length arrays. Within an encoded structure, the type of a field is determined by
its position, rather than by a tag. This means that TLS-encoded structures are
more compact than DER structures, but also that they can&rsquo;t be processed without
knowing the corresponding schema. For instance, here&rsquo;s the top-level schema from
<a href="https://tools.ietf.org/html/rfc6962#section-3.3">RFC 6962, section 3.3</a>:</p>

<pre><code> The contents of the ASN.1 OCTET STRING embedded in an OCSP extension
or X509v3 certificate extension are as follows:

opaque SerializedSCT&lt;1..2^16-1&gt;;

struct {
SerializedSCT sct_list &lt;1..2^16-1&gt;;
} SignedCertificateTimestampList;

Here, &quot;SerializedSCT&quot; is an opaque byte string that contains the
serialized TLS structure.

<p>Right away, we&rsquo;ve found one of those variable-length arrays. The length of such
an array (in bytes) is always represented by a length field just big enough to
hold the max array size. The max size of an <code>sct_list</code> is 65535 bytes, so the
length field is two bytes wide. Sure enough, those first two bytes are &ldquo;0x00
0xF0&rdquo;, or 240 in decimal. In other words, this <code>sct_list</code> will have 240 bytes. We
don&rsquo;t yet know how many SCTs will be in it. That will become clear only by
continuing to parse the encoded data and seeing where each struct ends (spoiler
alert: there are two SCTs!).</p>

<p>Now we know the first SerializedSCT starts with <code>0075…</code>. SerializedSCT
is itself a variable-length field, this time containing <code>opaque</code> bytes (much like <code>OCTET STRING</code>
back in the ASN.1 world). Like SignedCertificateTimestampList, it has a max size
of 65535 bytes, so we pull off the first two bytes and discover that the first
SerializedSCT is 0x0075 (117 decimal) bytes long. Here&rsquo;s the whole thing, in


<p>This can be decoded using the TLS encoding struct defined in <a href="https://tools.ietf.org/html/rfc6962#page-13">RFC 6962, section

<pre><code>enum { v1(0), (255) }

struct {
opaque key_id[32];
} LogID;

opaque CtExtensions&lt;0..2^16-1&gt;;

struct {
Version sct_version;
LogID id;
uint64 timestamp;
CtExtensions extensions;
digitally-signed struct {
Version sct_version;
SignatureType signature_type = certificate_timestamp;
uint64 timestamp;
LogEntryType entry_type;
select(entry_type) {
case x509_entry: ASN.1Cert;
case precert_entry: PreCert;
} signed_entry;
CtExtensions extensions;
} SignedCertificateTimestamp;

<p>Breaking that down:</p>

<pre><code># Version sct_version v1(0)
# LogID id (aka opaque key_id[32])
# uint64 timestamp (milliseconds since the epoch)
# CtExtensions extensions (zero-length array)
# digitally-signed struct

<p>To understand the &ldquo;digitally-signed struct,&rdquo; we need to turn back to <a href="https://tools.ietf.org/html/rfc5246#section-4.7">RFC 5246,
section 4.7</a>. It says:</p>

<pre><code>A digitally-signed element is encoded as a struct DigitallySigned:

struct {
SignatureAndHashAlgorithm algorithm;
opaque signature&lt;0..2^16-1&gt;;
} DigitallySigned;

<p>And in <a href="https://tools.ietf.org/html/rfc5246#section-">section</a>:</p>

<pre><code>enum {
none(0), md5(1), sha1(2), sha224(3), sha256(4), sha384(5),
sha512(6), (255)
} HashAlgorithm;

enum { anonymous(0), rsa(1), dsa(2), ecdsa(3), (255) }

struct {
HashAlgorithm hash;
SignatureAlgorithm signature;
} SignatureAndHashAlgorithm;

<p>We have &ldquo;0x0403&rdquo;, which corresponds to sha256(4) and ecdsa(3). The next two
bytes, &ldquo;0x0046&rdquo;, tell us the length of the &ldquo;opaque signature&rdquo; field, 70 bytes in
decimal. To decode the signature, we reference <a href="https://tools.ietf.org/html/rfc4492#page-20">RFC 4492 section
5.4</a>, which says:</p>

<pre><code>The digitally-signed element is encoded as an opaque vector &lt;0..2^16-1&gt;, the
contents of which are the DER encoding corresponding to the
following ASN.1 notation.

Ecdsa-Sig-Value ::= SEQUENCE {

<p>Having dived through two layers of TLS encoding, we are now back in ASN.1 land!
<a href="https://lapo.it/asn1js/#304402207E1FCD1E9A2BD2A50A0C81E713033A0762340DA8F91EF27A48B3817640159CD30220659FE9F1D880E2E8F6B325BE9F18956D17C6CA8A6F2B12CB0F55FB70F759A419">decode</a>
the remaining bytes into a SEQUENCE containing two INTEGERS. And we&rsquo;re done! Here&rsquo;s the whole
extension decoded:</p>

<pre><code># Extension SEQUENCE – RFC 5280
# length 0x0104 bytes (260 decimal)
# length 0x0A bytes (10 decimal)
# value (
# length 0xF5 bytes (245 decimal)
# OCTET STRING (embedded) – RFC 6962
# length 0xF2 bytes (242 decimal)
# Beginning of TLS encoded SignedCertificateTimestampList – RFC 5246 / 6962
# length 0xF0 bytes
# opaque SerializedSCT&lt;1..2^16-1&gt;
# length 0x75 bytes
# Version sct_version v1(0)
# LogID id (aka opaque key_id[32])
# uint64 timestamp (milliseconds since the epoch)
# CtExtensions extensions (zero-length array)
# digitally-signed struct – RFC 5426
# SignatureAndHashAlgorithm (ecdsa-sha256)
# opaque signature&lt;0..2^16-1&gt;;
# length 0x0046
# DER-encoded Ecdsa-Sig-Value – RFC 4492
44 # length 0x44 bytes
02 # r INTEGER
20 # length 0x20 bytes
# value
02 # s INTEGER
20 # length 0x20 bytes
# value
# opaque SerializedSCT&lt;1..2^16-1&gt;
# length 0x77 bytes
# Version sct_version v1(0)
# LogID id (aka opaque key_id[32])
# uint64 timestamp (milliseconds since the epoch)
# CtExtensions extensions (zero-length array)
# digitally-signed struct – RFC 5426
# SignatureAndHashAlgorithm (ecdsa-sha256)
# opaque signature&lt;0..2^16-1&gt;;
# length 0x0048
# DER-encoded Ecdsa-Sig-Value – RFC 4492
46 # length 0x46 bytes
02 # r INTEGER
21 # length 0x21 bytes
# value
02 # s INTEGER
21 # length 0x21 bytes
# value

<p>One surprising thing you might notice: In the first SCT, <code>r</code> and <code>s</code> are twenty
bytes long. In the second SCT, they are both twenty-one bytes long, and have a
leading zero. Integers in DER are two&rsquo;s complement, so if the leftmost bit is
set, they are interpreted as negative. Since <code>r</code> and <code>s</code> are positive, if the
leftmost bit would be a 1, an extra byte has to be added so that the leftmost
bit can be 0.</p>

<p>This is a little taste of what goes into encoding a certificate. I hope it was
informative! If you&rsquo;d like to learn more, I recommend &ldquo;<a href="http://luca.ntop.org/Teaching/Appunti/asn1.html">A Layman&rsquo;s Guide to a
Subset of ASN.1, BER, and DER</a>.&rdquo;</p>

<p><a name="poison"></a>Footnote 1: A &ldquo;poison extension&rdquo; is defined by <a href="https://tools.ietf.org/html/rfc6962#section-3.1">RFC 6962
section 3.1</a>:</p>

<pre><code>The Precertificate is constructed from the certificate to be issued by adding a special
critical poison extension (OID ``, whose
extnValue OCTET STRING contains ASN.1 NULL data (0x05 0x00))

<p>In other words, it&rsquo;s an empty extension whose only purpose is to ensure that
certificate processors will not accept precertificates as valid certificates. The
specification ensures this by setting the &ldquo;critical&rdquo; bit on the extension, which
ensures that code that doesn&rsquo;t recognize the extension will reject the whole
certificate. Code that does recognize the extension specifically as poison
will also reject the certificate.</p>

<p><a name="variable-length"></a>Footnote 2: Lengths from 0-127 are represented by
a single byte (short form). To express longer lengths, more bytes are used (long form).
The high bit (0x80) on the first byte is set to distinguish long form from short
form. The remaining bits are used to express how many more bytes to read for the
length. For instance, 0x81F5 means &ldquo;this is long form because the length is
greater than 127, but there&rsquo;s still only one byte of length (0xF5) to decode.&rdquo;</p>

Subverting Backdoored Encryption

Post Syndicated from Bruce Schneier original https://www.schneier.com/blog/archives/2018/04/subverting_back.html

This is a really interesting research result. This paper proves that two parties can create a secure communications channel using a communications system with a backdoor. It’s a theoretical result, so it doesn’t talk about how easy that channel is to create. And the assumptions on the adversary are pretty reasonable: that each party can create his own randomness, and that the government isn’t literally eavesdropping on every single part of the network at all times.

This result reminds me a lot of the work about subliminal channels from the 1980s and 1990s, and the notions of how to build an anonymous communications system on top of an identified system. Basically, it’s always possible to overlay a system around and outside any closed system.

How to Subvert Backdoored Encryption: Security Against Adversaries that Decrypt All Ciphertexts,” by Thibaut Horel and Sunoo Park and Silas Richelson and Vinod Vaikuntanathan.

Abstract: In this work, we examine the feasibility of secure and undetectable point-to-point communication in a world where governments can read all the encrypted communications of their citizens. We consider a world where the only permitted method of communication is via a government-mandated encryption scheme, instantiated with government-mandated keys. Parties cannot simply encrypt ciphertexts of some other encryption scheme, because citizens caught trying to communicate outside the government’s knowledge (e.g., by encrypting strings which do not appear to be natural language plaintexts) will be arrested. The one guarantee we suppose is that the government mandates an encryption scheme which is semantically secure against outsiders: a perhaps reasonable supposition when a government might consider it advantageous to secure its people’s communication against foreign entities. But then, what good is semantic security against an adversary that holds all the keys and has the power to decrypt?

We show that even in the pessimistic scenario described, citizens can communicate securely and undetectably. In our terminology, this translates to a positive statement: all semantically secure encryption schemes support subliminal communication. Informally, this means that there is a two-party protocol between Alice and Bob where the parties exchange ciphertexts of what appears to be a normal conversation even to someone who knows the secret keys and thus can read the corresponding plaintexts. And yet, at the end of the protocol, Alice will have transmitted her secret message to Bob. Our security definition requires that the adversary not be able to tell whether Alice and Bob are just having a normal conversation using the mandated encryption scheme, or they are using the mandated encryption scheme for subliminal communication.

Our topics may be thought to fall broadly within the realm of steganography: the science of hiding secret communication within innocent-looking messages, or cover objects. However, we deal with the non-standard setting of an adversarially chosen distribution of cover objects (i.e., a stronger-than-usual adversary), and we take advantage of the fact that our cover objects are ciphertexts of a semantically secure encryption scheme to bypass impossibility results which we show for broader classes of steganographic schemes. We give several constructions of subliminal communication schemes under the assumption that key exchange protocols with pseudorandom messages exist (such as Diffie-Hellman, which in fact has truly random messages). Each construction leverages the assumed semantic security of the adversarially chosen encryption scheme, in order to achieve subliminal communication.

Security updates for Monday

Post Syndicated from ris original https://lwn.net/Articles/750759/rss

Security updates have been issued by Debian (dovecot, irssi, libevt, libvncserver, mercurial, mosquitto, openssl, python-django, remctl, rubygems, and zsh), Fedora (acpica-tools, dovecot, firefox, ImageMagick, mariadb, mosquitto, openssl, python-paramiko, rubygem-rmagick, and thunderbird), Mageia (flash-player-plugin and squirrelmail), Slackware (php), and Ubuntu (dovecot).